Hello all, I am having a problem running sharity-light at startup. I am running:
-bash-3.00$ uname -a OpenBSD my.hostname 3.8 GENERIC#425 macppc (dmesg appended at bottom of this email) I added this line to rc.local: /usr/local/sbin/shlight //fileserver-host/public /mnt/myshare -U myusername -P mypasswd -w I reboot and the windows drive is not mounted. I run the exact same command as root (with sudo) from a bash shell and it is mounted and I can do an ls in /mnt/myshare/ or browse it with a samba share, and my files are there. I searched all the archives, and found one answer here: (I also found a few other people with the same problem) http://openbsd.toybed.com/archive/2003/msg13352.html but I am embarrassed to admit that I do not see how the output of that diff solves my problem. Following another suggestion I read, I made an external script which is very similar and call that script in rc.local. That script is executable. It still does not work. My question is this: how do I execute the shlight command at startup without having to log in after the machine starts and run it myself? -The rest of this email is simply further explanation to make sure I covered my basis, my apologies for my longwindedness.- Unfortunately, it has been years since my sysadmin days (law school...yadda yadda). Nonetheless, just playing around recently I installed OpenBSD 3.8 on an old G4 I had never turned on, the install worked effortlessly, OpenBSD kicks butt! OpenVPN went on and runs with only slightly more effort, ditto on Samba. I convinced the windows admin to forward a couple ports to the pretty G4 in my cluttered office (that cost me a bottle of scotch)... then I put on sharity-light: -bash-3.00$ shlight -v shlight: Version 1.1 (1998-11-16) which interestingly is the version that installs with a pkg_add -rv on the following link: ftp://ftp.openbsd.org/pub/OpenBSD/3.8/packages/powerpc/sharity-light-1.2.tgz I mounted my windows drive without too much problem. The VPN works great from my laptop anywhere. I can get all my other processes starting with rc.local or inetd.conf. As explained above, I can not get the windows drive mounted on my OpenBSD machine with sharity-light (or otherwise) on system startup. It seems silly that simply getting this final process to run on start up is keeping this project from completion. I welcome any ideas or help, including suggestions on another package or method to mount windows machines on my OpenBSD machine, on the same subnet, with no special networking considerations. Sharity-light has worked thus far without much problem (except for the aforementioned problems at system startup, and /usr/local/sbin/unshlight -a never actually works), but the lack of documentation, including man pages and mailing lists, and the negative feedback in some of what I read makes me think there must be a better alternative. I would simply use OpenVPN as a bridge to the windows network, but I do not have access to the DHCP server to break off a chunk of our subnet, I can't afford that much scotch. Thanks very much, Valerio p.s I have appended my dmesg: 9 headphones audio0 at awacs0 adb0 at macobio0 irq 18: via-cuda , 0 targets aed0 at adb0 addr 0: ADB Event device wdc0 at macobio0 irq 13: DMA atapiscsi0 at wdc0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8583, D54A> SCSI0 5/cdrom removable atapiscsi1 at wdc0 channel 0 drive 1 scsibus1 at atapiscsi1: 2 targets sd0 at scsibus1 targ 0 lun 0: <IOMEGA, ZIP 100, 14.A> SCSI0 0/direct removable sd0: drive offline cd0(wdc0:0:0): using BIOS timings, DMA mode 2 sd0(wdc0:0:1): using BIOS timings bm0 at macobio0 irq 42,33: address 00:50:e4:59:20:49 lxtphy0 at bm0 phy 0: LXT970 10/100 PHY, rev. 3 ohci0 at pci1 dev 6 function 0 "Opti 82C861" rev 0x10: irq 28, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Opti OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered vgafb0 at pci0 dev 16 function 0 "ATI Rage 128 GL" rev 0x00, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) uhub1 at uhub0 port 1 uhub1: Mitsumi Electric Hub in Apple USB Keyboard, rev 1.10/2.11, addr 2 uhub1: 3 ports with 2 removable, bus powered uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: Mitsumi Electric Apple USB Keyboard, rev 1.00/1.03, addr 3, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 bootpath: '/pci/@d/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/bsd' boot device: wd0. root on wd0a rootdev=0x0 rrootdev=0xb00 rawdev=0xb02 9 headphones audi [ using 323864 bytes of bsd ELF symbol table ] console out [ATY,Rage128y]console in [keyboard] USB and ADB found, using USB : memaddr 84000000 size 4000000, : consaddr 84000000, : ioaddr 80b20000, size 20000: memtag 8000, iotag 8000: width 640 linebytes 640 height 480 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 3.8 (GENERIC) #425: Sat Sep 10 15:49:26 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/macppc/compile/GENERIC real mem = 402653184 (393216K) avail mem = 360906752 (352448K) using 1254 buffers containing 20131840 bytes of memory mainbus0 (root) cpu0 at mainbus0: 7400 (Revision 0x206): 400 MHz: 1MB backside cache mpcpcibr0 at mainbus0: grackle, Revision 0x40 pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 0 function 0 "Motorola MPC106 PCI" rev 0x40 ppb0 at pci0 dev 13 function 0 "DEC 21154 PCI-PCI" rev 0x02 pci1 at ppb0 bus 1 "Texas Instruments TSB12LV21 FireWire" rev 0x04 at pci1 dev 0 function 0 not configured pciide0 at pci1 dev 1 function 0 "CMD Technology PCI0646" rev 0x07: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using irq 26 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <IC35L040AVVA07-0> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) fxp0 at pci1 dev 3 function 0 "Intel 82557" rev 0x08, i82559: irq 24, address 00:d0:b7:ba:68:8d inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 macobio0 at pci1 dev 5 function 0 "Apple Paddington" rev 0x00 macintr0 at macobio0 zsc0 at macobio0: irq 15,16 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 awacs0 at macobio0: irq 17,8,9 headphones audio0 at awacs0 adb0 at macobio0 irq 18: via-cuda , 0 targets aed0 at adb0 addr 0: ADB Event device wdc0 at macobio0 irq 13: DMA atapiscsi0 at wdc0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8583, D54A> SCSI0 5/cdrom removable atapiscsi1 at wdc0 channel 0 drive 1 scsibus1 at atapiscsi1: 2 targets sd0 at scsibus1 targ 0 lun 0: <IOMEGA, ZIP 100, 14.A> SCSI0 0/direct removable sd0: drive offline cd0(wdc0:0:0): using BIOS timings, DMA mode 2 sd0(wdc0:0:1): using BIOS timings bm0 at macobio0 irq 42,33: address 00:50:e4:59:20:49 lxtphy0 at bm0 phy 0: LXT970 10/100 PHY, rev. 3 ohci0 at pci1 dev 6 function 0 "Opti 82C861" rev 0x10: irq 28, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Opti OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered vgafb0 at pci0 dev 16 function 0 "ATI Rage 128 GL" rev 0x00, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) uhub1 at uhub0 port 1 uhub1: Mitsumi Electric Hub in Apple USB Keyboard, rev 1.10/2.11, addr 2 uhub1: 3 ports with 2 removable, bus powered uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: Mitsumi Electric Apple USB Keyboard, rev 1.00/1.03, addr 3, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 bootpath: '/pci/@d/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/bsd' boot device: wd0. root on wd0a rootdev=0x0 rrootdev=0xb00 rawdev=0xb02 syncing disks... [ using 323864 bytes of bsd ELF symbol table ] console out [ATY,Rage128y]console in [keyboard] USB and ADB found, using USB : memaddr 84000000 size 4000000, : consaddr 84000000, : ioaddr 80b20000, size 20000: memtag 8000, iotag 8000: width 640 linebytes 640 height 480 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 3.8 (GENERIC) #425: Sat Sep 10 15:49:26 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/macppc/compile/GENERIC real mem = 402653184 (393216K) avail mem = 360906752 (352448K) using 1254 buffers containing 20131840 bytes of memory mainbus0 (root) cpu0 at mainbus0: 7400 (Revision 0x206): 400 MHz: 1MB backside cache mpcpcibr0 at mainbus0: grackle, Revision 0x40 pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 0 function 0 "Motorola MPC106 PCI" rev 0x40 ppb0 at pci0 dev 13 function 0 "DEC 21154 PCI-PCI" rev 0x02 pci1 at ppb0 bus 1 "Texas Instruments TSB12LV21 FireWire" rev 0x04 at pci1 dev 0 function 0 not configured pciide0 at pci1 dev 1 function 0 "CMD Technology PCI0646" rev 0x07: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using irq 26 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <IC35L040AVVA07-0> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) fxp0 at pci1 dev 3 function 0 "Intel 82557" rev 0x08, i82559: irq 24, address 00:d0:b7:ba:68:8d inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 macobio0 at pci1 dev 5 function 0 "Apple Paddington" rev 0x00 macintr0 at macobio0 zsc0 at macobio0: irq 15,16 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 awacs0 at macobio0: irq 17,8,9 headphones audio0 at awacs0 adb0 at macobio0 irq 18: via-cuda , 0 targets aed0 at adb0 addr 0: ADB Event device wdc0 at macobio0 irq 13: DMA atapiscsi0 at wdc0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8583, D54A> SCSI0 5/cdrom removable atapiscsi1 at wdc0 channel 0 drive 1 scsibus1 at atapiscsi1: 2 targets sd0 at scsibus1 targ 0 lun 0: <IOMEGA, ZIP 100, 14.A> SCSI0 0/direct removable sd0: drive offline cd0(wdc0:0:0): using BIOS timings, DMA mode 2 sd0(wdc0:0:1): using BIOS timings bm0 at macobio0 irq 42,33: address 00:50:e4:59:20:49 lxtphy0 at bm0 phy 0: LXT970 10/100 PHY, rev. 3 ohci0 at pci1 dev 6 function 0 "Opti 82C861" rev 0x10: irq 28, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Opti OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered vgafb0 at pci0 dev 16 function 0 "ATI Rage 128 GL" rev 0x00, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) uhub1 at uhub0 port 1 uhub1: Mitsumi Electric Hub in Apple USB Keyboard, rev 1.10/2.11, addr 2 uhub1: 3 ports with 2 removable, bus powered uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: Mitsumi Electric Apple USB Keyboard, rev 1.00/1.03, addr 3, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 bootpath: '/pci/@d/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/bsd' boot device: wd0. root on wd0a rootdev=0x0 rrootdev=0xb00 rawdev=0xb02
