hi
i have installed openbsd 6.2 on a lenovo thinkcentre i5 desktop computer,
the installation completes fine afaics.
i reboot, the dmesg report scrolls up then the screen goes blank,
i can't tell if dmesg completes or stops half way through,
after which the machine doesn't respond to keyboard or mouse.
the following dmesg i retrieved dropping to a shell when booting from
the installation usb stick
i have also booted the machine with a live linux mint which works fine.
what could be causing the problem or what else can i do to retrieve any
meaningful diagnostics to forward to the list ?
---------------------------------------------------------------
OpenBSD 6.2 (RAMDISK_CD) #165: Tue Oct 3 20:05:31 MDT 2017
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Core(TM) i5-4440S CPU @ 2.80GHz ("GenuineIntel"
686-class) 2.90 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
real mem = 3568664576 (3403MB)
avail mem = 3491119104 (3329MB)
mainbus0 at root
bios0 at mainbus0: date 04/13/12, SMBIOS rev. 2.8 @ 0xebe90 (31 entries)
bios0: vendor LENOVO version "FCKT46AUS" date 12/16/2013
bios0: LENOVO 10AW008FUK
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC FPDT LPIT SLIC MSDM SSDT SSDT MCFG HPET
SSDT SSDT BGRT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP06)
acpiprt3 at acpi0: bus -1 (PEG0)
acpiprt4 at acpi0: bus -1 (PEG1)
acpiprt5 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0: not present
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
"INT3F0D" at acpi0 not configured
"PNP0401" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
bios0: ROM list: 0xc0000/0xec00 0xcf000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4600" rev 0x06
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Core 4G HD Audio" rev 0x06 at pci0 dev 3 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
"Intel 8 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4: apic 8 int 16
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 5 "Intel 8 Series PCIE" rev 0xd4: apic 8 int 17
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G
(0x4c00), msi, address 44:37:e6:e1:67:65
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel H81 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST500DM002-1BD14, KC66> SCSI3
0/direct fixed naa.5000c50074c74d5b
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVD-RAM GHB0N, JE00> ATAPI
5/cdrom removable
"Intel 8 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW"
rev 2.00/57.13 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI2
0/direct removable serial.0bda0157926571200000
uhidev0 at uhub0 port 5 configuration 1 interface 0 "PixArt Lenovo USB
Optical Mouse" rev 2.00/1.00 addr 3
uhidev0: iclass 3/1
uhid at uhidev0 not configured
umass1 at uhub0 port 6 configuration 1 interface 0 "HP USB FLASH DRIVE"
rev 2.00/16.38 addr 4
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <hp, USB Flash Drive, 1638> SCSI2 0/direct
removable serial.03f0b1071E4000000124
sd2: 15600MB, 512 bytes/sector, 31950720 sectors
uhidev1 at uhub0 port 9 configuration 1 interface 0 "Lite-On Technology
Corp. Lenovo USB Keyboard" rev 1.10/1.13 addr 5
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 9 configuration 1 interface 1 "Lite-On Technology
Corp. Lenovo USB Keyboard" rev 1.10/1.13 addr 5
uhidev2: iclass 3/0, 2 report ids
uhid at uhidev2 reportid 1 not configured
uhid at uhidev2 reportid 2 not configured
uhub3 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087 product
0x8008" rev 2.00/0.04 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "vendor 0x8087 product
0x8000" rev 2.00/0.04 addr 2
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
uhidev0 detached
uhidev0 at uhub0 port 5 configuration 1 interface 0 "PixArt Lenovo USB
Optical Mouse" rev 2.00/1.00 addr 3
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev0 detached
uhidev0 at uhub0 port 5 configuration 1 interface 0 "PixArt Lenovo USB
Optical Mouse" rev 2.00/1.00 addr 3
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev0 detached
umass2 at uhub0 port 5 configuration 1 interface 0 "vendor 0x13fe USB
DISK 2.0" rev 2.00/1.10 addr 3
umass2: using SCSI over Bulk-Only
scsibus4 at umass2: 2 targets, initiator 0
sd3 at scsibus4 targ 1 lun 0: <, USB DISK 2.0, PMAP> SCSI0 0/direct
removable serial.13fe1e00077612460052
sd3: 1968MB, 512 bytes/sector, 4030464 sectors
uid 0 on /: out of inodes
sd3 detached
scsibus4 detached
umass2 detached
umass2 at uhub0 port 5 configuration 1 interface 0 "Kingston
DataTraveler 2.0" rev 2.00/2.00 addr 3
umass2: using SCSI over Bulk-Only
scsibus4 at umass2: 2 targets, initiator 0
sd3 at scsibus4 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2
0/direct removable serial.09511603000000000086
sd3: 3836MB, 512 bytes/sector, 7856128 sectors
sd3 detached
scsibus4 detached
umass2 detached
umass2 at uhub0 port 5 configuration 1 interface 0 "Kingston
DataTraveler 2.0" rev 2.00/2.00 addr 3
umass2: using SCSI over Bulk-Only
scsibus4 at umass2: 2 targets, initiator 0
sd3 at scsibus4 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2
0/direct removable serial.09511603000000000086
sd3: 3836MB, 512 bytes/sector, 7856128 sectors
scsibus4 detached
umass2 detach
-------------------------------
shadrock
