Hi,
I'm trying to install OpenBSD 6.2 on a Zenbook (UX390UA) but it is
unable to find the installer USB key (after booting from it). The key
is connected via the USB-A/C adapter/hub that comes with the laptop.
The same hardware works fine under Linux.
The initial dmesg (full output below) has:
sd1 at scsibus1 targ 1 lun 0: <Verbatim, STORE N GO, 8.07> SCSI2
0/direct removable
sd1: 3728MB, 512 bytes/sector, 7634944 sectors
...but:
$ ls /dev/*sd1*
ls: /dev/*sd1*: No such file or directory
When un- and replugging the key, the following additional lines appear:
sd1 detached
scsibus1 detached
umass0 detached
uhub1: port 1, set config 0 at addr 3 failed
uhub1: device problem, disabling port 1
When un- and replugging the adapter (with the key in it), the
following additional lines appear:
uhub1 detached
uhub2 detached
uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs, Inc.
USB2.0 Hub" rev 2.10/6.80 addr 2
uhub1: port 1, set config 0 at addr 3 failed
uhub1: device problem, disabling port 1
"VIA Technologies Inc. USB 2.0 BILLBOARD" rev 2.01/3.04 addr 3 at
uhub1 port 2 not configured
uhub2 at uhub0 port 13 configuration 1 interface 0 "VIA Labs, Inc.
USB3.0 Hub" rev 3.00/6.85 addr 4
Using another type of USB hub and an external HDD gives similar results:
uhub1 at uhub0 port 1 configuration 1 interface 0 "Apple Inc. USB2.0
Hub" rev 2.10/45.28 addr 2
"Apple Inc. USB-C Digital AV Multiport Adapter" rev 2.10/2.35 addr 3
at uhub1 port 2 not configured
uhub2 at uhub0 port 13 configuration 1 interface 0 "Apple Inc. USB3.0
Hub" rev 3.00/45.28 addr 4
umass0 at uhub2 port 1 configuration 1 interface 0 "Seagate Expansion"
rev 3.00/0.00 addr 8
mass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Seagate, Expansion, 9300> SCSI4 0/direct fixed
sd1: 3815447MB, 512 bytes/sector, 7814037167 sectors
uhub1 detached
uhub1 at uhub0 port 1 configuration 1 interface 0 "Apple Inc. USB2.0
Hub" rev 2.10/45.28 addr 2
"Apple Inc. USB-C Digital AV Multiport Adapter" rev 2.10/2.35 addr 3
at uhub1 port 2 not configured
Any help with this would be much appreciated!
Thanks
Max
Initial dmesg:
OpenBSD 6.2 (RAMDISK_CD) #132: Tue Oct 3 21:26:51 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 17037766656 (16248MB)
avail mem = 16517648384 (15752MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xeb350 (31 entries)
bios0: vendor American Megatrends Inc. version "UX390UAK.312" date 04/25/2017
bios0: ASUSTeK COMPUTER INC. UX390UAK
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC FPDT ECDT MCFG FIDT SSDT MSDM SSDT HPET
UEFI SSDT LPIT WSMT SSDT SSDT DBGP DBG2 DMAR TPM2
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2904000000 Hz
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 3 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus 1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus 2 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP14)
acpiprt22 at acpi0: bus -1 (RP15)
acpiprt23 at acpi0: bus -1 (RP16)
acpiec at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
"INT3F0D" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"ATK3001" at acpi0 not configured
"ELAN1301" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"ATK4002" at acpi0 not configured
"INT3400" at acpi0 not configured
"INT340E" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Core 6G Thermal" rev 0x02 at pci0 dev 4 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 100 Series Thermal" rev 0x21 at pci0 dev 20 function 2 not configured
"Intel 100 Series I2C" rev 0x21 at pci0 dev 21 function 0 not configured
"Intel 100 Series I2C" rev 0x21 at pci0 dev 21 function 1 not configured
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x3a, msi
ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 3
nvme0 at pci3 dev 0 function 0 vendor "Toshiba", unknown product
0x010f rev 0x01: msi, NVMe 1.1
nvme0: THNSN5512GPU7 TOSHIBA, firmware 57XA4104, serial Y63S108UT7DV
scsibus0 at nvme0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <NVMe, THNSN5512GPU7 TO, 57XA> SCSI4
0/direct fixed
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors
"Intel 200 Series LPC" rev 0x21 at pci0 dev 31 function 0 not configured
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
"Intel 200 Series HD Audio" rev 0x21 at pci0 dev 31 function 3 not configured
"Intel 100 Series SMBus" rev 0x21 at pci0 dev 31 function 4 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs, Inc.
USB2.0 Hub" rev 2.10/6.80 addr 2
umass0 at uhub1 port 1 configuration 1 interface 0 "Verbatim STORE N
GO" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Verbatim, STORE N GO, 8.07> SCSI2
0/direct removable
sd1: 3728MB, 512 bytes/sector, 7634944 sectors
"VIA Technologies Inc. USB 2.0 BILLBOARD" rev 2.01/3.04 addr 4 at
uhub1 port 2 not configured
"AzureWave USB2.0 VGA UVC WebCam" rev 2.00/16.09 addr 5 at uhub0 port
5 not configured
"vendor 0x8087 product 0x0a2b" rev 2.00/0.01 addr 6 at uhub0 port 8
not configured
"ELAN ELAN:Fingerprint" rev 2.00/1.35 addr 7 at uhub0 port 9 not configured
uhub2 at uhub0 port 13 configuration 1 interface 0 "VIA Labs, Inc.
USB3.0 Hub" rev 3.00/6.85 addr 8
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
iwm0: could not read firmware iwm-8000C-16 (error 2)
iwm0: failed to load init firmware
