A further update... after a suspend-resume cycle (suspend-to-RAM, which 'just works' via Fn-F4), the touchpad works fine. 'dmesg' shows 15 new lines appended after my most recent suspend-resume cycle, but none of them mention the mouse (pms0) explicitly:
WARNING !(rw_status(&mode_config->mutex) == 0x0001UL) && !drm_modeset_is_locked(&mode_config->connection_mutex) failed at /sys/dev/pci/drm/drm_crtc.h:1577 WARNING !(rw_status(&mode_config->mutex) == 0x0001UL) && !drm_modeset_is_locked(&mode_config->connection_mutex) failed at /sys/dev/pci/drm/drm_crtc.h:1577 uhub0 detached uhub1 detached uhub2 detached uhub3 detached uhub4 detached uhub0 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 uhub1 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 uhub2 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 uhub3 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 uhub4 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 drm:pid80100:radeon_bo_unpin *WARNING* 0xffff800000444390 unpin not necessary WARNING !(rw_status(&mode_config->mutex) == 0x0001UL) && !drm_modeset_is_locked(&mode_config->connection_mutex) failed at /sys/dev/pci/drm/drm_crtc.h:1577 WARNING !(rw_status(&mode_config->mutex) == 0x0001UL) && !drm_modeset_is_locked(&mode_config->connection_mutex) failed at /sys/dev/pci/drm/drm_crtc.h:1577 Do other T60/T60p users see touchpad problems? -- -- "Jonathan Thornburg [remove -animal to reply]" <jth...@astro.indiana-zebra.edu> Dept of Astronomy & IUCSS, Indiana University, Bloomington, Indiana, USA currently visiting Max-Plack-Institute fuer Gravitationsphysik (Albert-Einstein-Institut), Potsdam-Golm, Germany "There was of course no way of knowing whether you were being watched at any given moment. How often, or on what system, the Thought Police plugged in on any individual wire was guesswork. It was even conceivable that they watched everybody all the time." -- George Orwell, "1984"