On Dec 27, 2017 8:07 PM, Jordan Geoghegan <jgeoghega...@gmail.com> wrote:
>
> Did you:
>
> # newfs /dev/rsd(whichever is correct)
>
> before reboot?
>
> That doesn't make sense. What would I be making a new filesystem for -- or
> on, for that matter. Disk formatting is taken care of by the installer script.
>
> Did you:
>
> cp your kernels to the new sd's
>
> Again, this doesn't make sense. I only have a single 'a' raid partition per
> disk as per the man pages. Where would I cp a kernel to? There is only one
> logical volume that is being worked with here. There is no second location
> for me to cp a kernel to.
>
man softraid
> I think you also need to installboot(8) as well
>
> This does make sense, I have tried running installboot but it does not change
> the outcome. I will unbox the T3-1 and try running the same steps to see if
> the T3 is capable of booting softraid, If it boots, there may be some T4
> specific oddities at play here.
> I will try contacting sparc64 port maintainer if I am unsuccessful.
>
>
> On 12/27/17 16:26, Edgar Pettijohn wrote:
> > On Wed, Dec 27, 2017 at 03:01:12PM -0800, Jordan Geoghegan wrote:
> >> sparc* is not an fdisk / MBR platform
> > I don't have one :(
> > more inline
> >>
> >>
> >> On 12/27/17 14:56, Edgar Pettijohn wrote:
> >>> On Wed, Dec 27, 2017 at 02:29:09PM -0800, Jordan Geoghegan wrote:
> >>>> I tried installing again and followed your instructions to a T and the
> >>>> installer hung after typing reboot at the prompt upon finishing install.
> >>>>
> >>>> I let it sit for 10-15 minutes after entering reboot command but then
> >>>> determined it had likely frozen considering it said the disks had been
> >>>> synced and the softraid volume reported being detached. I power cycled
> >>>> the
> >>>> device and was met with this upon reboot after following boot_sparc64(8)
> >>>> instructions:
> >>>>
> >>>> Boot device: disk0 File and args: sr0a:/bsd
> >>>> OpenBSD IEEE 1275 Bootblock 1.4
> >>>>>> OpenBSD BOOT 1.9
> >>>> ERROR: /iscsi-hba: No iscsi-network-bootpath property
> >>>> Unknown device: sr0
> >>>> Cannot boot from softraid: Unknown error: code 19
> >>>> Program terminated
> >>>> {0} ok
> >>>>
> >>>> So I rebooted and and tried once again with fresh disks while I recorded
> >>>> the
> >>>> console output to see if anyone can spot me doing something wrong here,
> >>>> or
> >>>> if this is indeed some sort of bug.
> >>>>
> >>>> The installer didn't freeze the second time around, but I ultimately met
> >>>> the
> >>>> same result:
> >>>>
> >>>> Cannot boot from softraid: Unknown error: code 19
> >>>>
> >>>> Any ideas?
> >>>>
> >>>>
> >>>> T4-1 output:
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> NOTICE: Entering OpenBoot.
> >>>> NOTICE: Fetching Guest MD from HV.
> >>>> NOTICE: Starting additional cpus.
> >>>> NOTICE: Initializing LDC services.
> >>>> NOTICE: Probing PCI devices.
> >>>> NOTICE: Finished PCI probing.
> >>>>
> >>>> SPARC T4-1, No Keyboard
> >>>> Copyright (c) 1998, 2016, Oracle and/or its affiliates. All rights
> >>>> reserved.
> >>>> OpenBoot 4.38.5, 127.5000 GB memory available, Serial #104767966.
> >>>> Ethernet address 0:10:e0:3e:a1:de, Host ID: 863ea1de.
> >>>>
> >>>>
> >>>>
> >>>> Can't open disk label package
> >>>> Evaluating:
> >>>> No viable default device found in boot-device variable.
> >>>>
> >>>> {0} ok boot disk3:c bsd
> >>>> Boot device: /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@p3:c File and args:
> >>>> bsd
> >>>> OpenBSD IEEE 1275 Bootblock 1.4
> >>>> ..>> OpenBSD BOOT 1.9
> >>>> |#/#-#open
> >>>> /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5001b448b4351630,0:c/etc/random.seed:
> >>>> No such file or directory
> >>>> \#|#/#-#\#Booting
> >>>> /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5001b448b4351630,0:c/bsd
> >>>> 4087984@0x1000000|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|
> >>>> #/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|
> >>>> #/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|
> >>>> #/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#
> >>>> |#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#+8016@0x13e60b0/#+3260440@0x1c00000-#
> >>>> \#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-
> >>>> #\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-
> >>>> #\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-
> >>>> #\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\
> >>>> #|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#
> >>>> /#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/
> >>>> #-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#+933864@0x1f1c018\#
> >>>> #/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#
> >>>>
> >>>> console is /virtual-devices@100/console@1
> >>>>
> >>>> Copyright (c) 1982, 1986, 1989, 1991, 1993
> >>>>
> >>>> The Regents of the University of California. All rights reserved.
> >>>>
> >>>> Copyright (c) 1995-2017 OpenBSD. All rights reserved.
> >>>> https://www.OpenBSD.org
> >>>>
> >>>>
> >>>> OpenBSD 6.2 (RAMDISK) #282: Tue Oct 3 23:21:19 MDT 2017
> >>>>
> >>>>
> >>>>dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/RAMDISK
> >>>>
> >>>> real mem = 136902082560 (130560MB)
> >>>>
> >>>> avail mem = 134512214016 (128280MB)
> >>>>
> >>>> mainbus0 at root: SPARC T4-1
> >>>>
> >>>> cpu0 at mainbus0: SPARC-T4 (rev 0.0) @ 2847.862 MHz
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "SPARC-T4" at mainbus0 not configured
> >>>>
> >>>> "reboot-memory" at mainbus0 not configured
> >>>>
> >>>> vbus0 at mainbus0
> >>>>
> >>>> "flashprom" at vbus0 not configured
> >>>>
> >>>> "tpm" at vbus0 not configured
> >>>>
> >>>> cbus0 at vbus0
> >>>>
> >>>> "virtual-channel" at cbus0 not configured
> >>>>
> >>>> "virtual-channel-client" at cbus0 not configured
> >>>>
> >>>> "virtual-channel-client" at cbus0 not configured
> >>>>
> >>>> "virtual-channel" at cbus0 not configured
> >>>>
> >>>> "virtual-domain-service" at cbus0 not configured
> >>>>
> >>>> vrng0 at vbus0
> >>>>
> >>>> vcons0 at vbus0: ivec 0x111, console
> >>>>
> >>>> vrtc0 at vbus0
> >>>>
> >>>> vpci0 at mainbus0: bus 0 to 18, dvma map 80000000-ffffffff
> >>>>
> >>>> pci0 at vpci0
> >>>>
> >>>> ppb0 at pci0 dev 1 function 0 "Sun SPARC PCIE" rev 0x01
> >>>>
> >>>> pci1 at ppb0 bus 1
> >>>>
> >>>> ppb1 at pci1 dev 0 function 0 vendor "IDT", unknown product 0x807a rev
> >>>> 0x02
> >>>>
> >>>> pci2 at ppb1 bus 2
> >>>>
> >>>> ppb2 at pci2 dev 0 function 0 vendor "IDT", unknown product 0x807a rev
> >>>> 0x02: msi
> >>>>
> >>>> pci3 at ppb2 bus 3
> >>>>
> >>>> ppb3 at pci2 dev 4 function 0 vendor "IDT", unknown product 0x807a rev
> >>>> 0x02
> >>>>
> >>>> pci4 at ppb3 bus 4
> >>>>
> >>>> mpii0 at pci4 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi
> >>>>
> >>>> mpii0: RF On-Board, firmware 9.5.0.0 IR, MPI 2.0
> >>>>
> >>>> scsibus0 at mpii0: 834 targets
> >>>>
> >>>> ppb4 at pci2 dev 6 function 0 vendor "IDT", unknown product 0x807a rev
> >>>> 0x02: msi
> >>>>
> >>>> pci5 at ppb4 bus 5
> >>>>
> >>>> ppb5 at pci2 dev 8 function 0 vendor "IDT", unknown product 0x807a rev
> >>>> 0x02: msi
> >>>>
> >>>> pci6 at ppb5 bus 6
> >>>>
> >>>> ppb6 at pci0 dev 2 function 0 "Sun SPARC PCIE" rev 0x01
> >>>>
> >>>> pci7 at ppb6 bus 7
> >>>>
> >>>> ppb7 at pci7 dev 0 function 0 vendor "IDT", unknown product 0x8077 rev
> >>>> 0x02
> >>>>
> >>>> pci8 at ppb7 bus 8
> >>>>
> >>>> ppb8 at pci8 dev 0 function 0 vendor "IDT", unknown product 0x8077 rev
> >>>> 0x02
> >>>>
> >>>> pci9 at ppb8 bus 9
> >>>>
> >>>> ppb9 at pci9 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x02
> >>>>
> >>>> pci10 at ppb9 bus 10
> >>>>
> >>>> "ASPEED Technology AST2000" rev 0x10 at pci10 dev 0 function 0 not
> >>>> configured
> >>>>
> >>>> ppb10 at pci8 dev 4 function 0 vendor "IDT", unknown product 0x8077 rev
> >>>> 0x02
> >>>>
> >>>> pci11 at ppb10 bus 11
> >>>>
> >>>> mpii1 at pci11 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi
> >>>>
> >>>> mpii1: RF On-Board, firmware 9.5.0.0 IR, MPI 2.0
> >>>>
> >>>> scsibus1 at mpii1: 834 targets
> >>>>
> >>>> ppb11 at pci8 dev 6 function 0 vendor "IDT", unknown product 0x8077 rev
> >>>> 0x02
> >>>>
> >>>> pci12 at ppb11 bus 12
> >>>>
> >>>> em0 at pci12 dev 0 function 0 "Intel 82576" rev 0x01: msi, address
> >>>> 00:10:e0:3e:a1:de
> >>>>
> >>>> em1 at pci12 dev 0 function 1 "Intel 82576" rev 0x01: msi, address
> >>>> 00:10:e0:3e:a1:df
> >>>>
> >>>> ppb12 at pci8 dev 7 function 0 vendor "IDT", unknown product 0x8077 rev
> >>>> 0x02
> >>>>
> >>>> pci13 at ppb12 bus 13
> >>>>
> >>>> em2 at pci13 dev 0 function 0 "Intel 82576" rev 0x01: msi, address
> >>>> 00:10:e0:3e:a1:e0
> >>>>
> >>>> em3 at pci13 dev 0 function 1 "Intel 82576" rev 0x01: msi, address
> >>>> 00:10:e0:3e:a1:e1
> >>>>
> >>>> ppb13 at pci8 dev 8 function 0 vendor "IDT", unknown product 0x8077 rev
> >>>> 0x02: msi
> >>>>
> >>>> pci14 at ppb13 bus 14
> >>>>
> >>>> ppb14 at pci8 dev 10 function 0 vendor "IDT", unknown product 0x8077 rev
> >>>> 0x02: msi
> >>>>
> >>>> pci15 at ppb14 bus 15
> >>>>
> >>>> ppb15 at pci8 dev 12 function 0 vendor "IDT", unknown product 0x8077 rev
> >>>> 0x02: msi
> >>>>
> >>>> pci16 at ppb15 bus 16
> >>>>
> >>>> ppb16 at pci8 dev 15 function 0 vendor "IDT", unknown product 0x8077 rev
> >>>> 0x02
> >>>>
> >>>> pci17 at ppb16 bus 17
> >>>>
> >>>> ppb17 at pci17 dev 0 function 0 "PLX PEX 8112" rev 0xaa
> >>>>
> >>>> pci18 at ppb17 bus 18
> >>>>
> >>>> ohci0 at pci18 dev 0 function 0 "NEC USB" rev 0x43: ivec 0x402, version
> >>>> 1.0
> >>>>
> >>>> ohci1 at pci18 dev 0 function 1 "NEC USB" rev 0x43: ivec 0x403, version
> >>>> 1.0
> >>>>
> >>>> ehci0 at pci18 dev 0 function 2 "NEC USB" rev 0x04: ivec 0x404
> >>>>
> >>>> usb0 at ehci0: USB revision 2.0
> >>>>
> >>>> uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev
> >>>> 2.00/1.00 addr 1
> >>>>
> >>>> usb1 at ohci0: USB revision 1.0
> >>>>
> >>>> uhub1 at usb1 configuration 1 interface 0 "NEC OHCI root hub" rev
> >>>> 1.00/1.00 addr 1
> >>>>
> >>>> usb2 at ohci1: USB revision 1.0
> >>>>
> >>>> uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev
> >>>> 1.00/1.00 addr 1
> >>>>
> >>>> "niu" at mainbus0 not configured
> >>>>
> >>>> "pci-performance-counters" at mainbus0 not configured
> >>>>
> >>>> cd0 at scsibus1 targ 8 lun 0: <TEAC, DV-W28SS-W, 1.0A> ATAPI 5/cdrom
> >>>> removable
> >>>>
> >>>> sd0 at scsibus0 targ 2 lun 0: <HP, EG0300FAWHV, HPDD> SCSI3 0/direct
> >>>> fixed naa.5000c5001b1e4cd3
> >>>>
> >>>> sd0: 286102MB, 512 bytes/sector, 585937500 sectors
> >>>>
> >>>> sd1 at scsibus0 targ 5 lun 0: <ATA, SanDisk SDSSDA24, 30RL> SCSI3
> >>>> 0/direct fixed naa.5001b448b4351630
> >>>>
> >>>> sd1: 228936MB, 512 bytes/sector, 468862128 sectors
> >>>>
> >>>> sd2 at scsibus0 targ 3 lun 0: <HP, EG0300FAWHV, HPDD> SCSI3 0/direct
> >>>> fixed naa.5000c50029674d0f
> >>>>
> >>>> sd2: 286102MB, 512 bytes/sector, 585937500 sectors
> >>>>
> >>>> uhub3 at uhub0 port 2 configuration 1 interface 0 "vendor 0x04b4 product
> >>>> 0x6560" rev 2.00/0.0b addr 2
> >>>>
> >>>> uhub4 at uhub3 port 3 configuration 1 interface 0 "American Megatrends
> >>>> Inc. Generic Hub" rev 2.00/1.00 addr 3
> >>>>
> >>>> umass0 at uhub4 port 2 configuration 1 interface 0 "American Megatrends
> >>>> Inc. Virtual Cdrom Device" rev 2.00/1.00 addr 4
> >>>>
> >>>> umass0: using SCSI over Bulk-Only
> >>>>
> >>>> scsibus2 at umass0: 2 targets, initiator 0
> >>>>
> >>>> cd1 at scsibus2 targ 1 lun 0: <AMI, Virtual CDROM, 1.00> SCSI0 5/cdrom
> >>>> removable
> >>>>
> >>>> cdce0 at uhub4 port 3 configuration 2 interface 0 "SunMicro Virtual Eth
> >>>> Device" rev 2.00/1.00 addr 5
> >>>>
> >>>> cdce0: address 02:21:28:57:47:17
> >>>>
> >>>> uhidev0 at uhub3 port 4 configuration 1 interface 0 "American Megatrends
> >>>> Inc. Virtual Keyboard and Mouse" rev 1.10/1.00 addr 6
> >>>>
> >>>> uhidev0: iclass 3/1
> >>>>
> >>>> ukbd0 at uhidev0
> >>>>
> >>>> wskbd0 at ukbd0
> >>>>
> >>>> uhidev1 at uhub3 port 4 configuration 1 interface 1 "American Megatrends
> >>>> Inc. Virtual Keyboard and Mouse" rev 1.10/1.00 addr 6
> >>>>
> >>>> uhidev1: iclass 3/1
> >>>>
> >>>> uhid at uhidev1 not configured
> >>>>
> >>>> uhub5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x04b4 product
> >>>> 0x6560" rev 2.00/0.0b addr 7
> >>>>
> >>>> softraid0 at root
> >>>>
> >>>> scsibus3 at softraid0: 256 targets
> >>>>
> >>>> bootpath:
> >>>> /pci@400,0/pci@1,0/pci@0,0/pci@4,0/scsi@0,0/disk@5001b448b4351630,0:c
> >>>>
> >>>> root on rd0a swap on rd0b dump on rd0b
> >>>>
> >>>> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
> >>>>
> >>>> Welcome to the OpenBSD/sparc64 6.2 installation program.
> >>>> (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? s
> >>>> # cd /dev
> >>>>
> >>>> # sh MAKEDEV sd1 sd2 sd3 sd4
> >>> Did you:
> >>>
> >>> fdisk -iy sd0
> >>> fdisk -iy sd1 (or whatever the appropriate disk is)
> >>>
> >>> the error code 19 is ENODEV so I'm guessing if you didn't then there is
> >>> no mbr and without it the bootcode may not be able to find the device.
> >>> Of course I'm no expert and its mainly just a guess.
> >>>> # disklabel sd1
> >>>>
> >>>> # /dev/rsd1c:
> >>>> type: SCSI
> >>>> disk: SCSI disk
> >>>> label:
> >>>> duid: d2b2a5bbe2d92f1e
> >>>> flags: vendor
> >>>> bytes/sector: 512
> >>>> sectors/track: 32
> >>>> tracks/cylinder: 1
> >>>> sectors/cylinder: 32
> >>>> cylinders: 180
> >>>> total sectors: 468862128
> >>>> boundstart: 0
> >>>> boundend: 468862128
> >>>> drivedata: 0
> >>>>
> >>>> 16 partitions:
> >>>> # size offset fstype [fsize bsize cpg]
> >>>> a: 5760 0 4.2BSD 4096 8192 128
> >>>> c: 468862128 0 unused
> >>>> #
> >>>> # disklabel sd0
> >>>>
> >>>> # /dev/rsd0c:
> >>>> type: SCSI
> >>>> disk: SCSI disk
> >>>> label: EG0300FAWHV
> >>>> duid: 0000000000000000
> >>>> flags: vendor
> >>>> bytes/sector: 512
> >>>> sectors/track: 1284
> >>>> tracks/cylinder: 4
> >>>> sectors/cylinder: 5136
> >>>> cylinders: 114029
> >>>> total sectors: 585937500
> >>>> boundstart: 0
> >>>> boundend: 585937500
> >>>> drivedata: 0
> >>>>
> >>>> 16 partitions:
> >>>> # size offset fstype [fsize bsize cpg]
> >>>> c: 585937500 0 unused
> >>>> #
> >>>> # disklabel sd2
> >>>>
> >>>> # /dev/rsd2c:
> >>>> type: SCSI
> >>>> disk: SCSI disk
> >>>> label: EG0300FAWHV
> >>>> duid: 0000000000000000
> >>>> flags: vendor
> >>>> bytes/sector: 512
> >>>> sectors/track: 1284
> >>>> tracks/cylinder: 4
> >>>> sectors/cylinder: 5136
> >>>> cylinders: 114029
> >>>> total sectors: 585937500
> >>>> boundstart: 0
> >>>> boundend: 585937500
> >>>> drivedata: 0
> >>>>
> >>>> 16 partitions:
> >>>> # size offset fstype [fsize bsize cpg]
> >>>> c: 585937500 0 unused
> >>>> # disklabel -E sd0
> >>>>
> >>>> This platform requires that partition offsets/sizes be on cylinder
> >>>> boundaries.
> >>>> Partition offsets/sizes will be rounded to the nearest cylinder
> >>>> automatically.
> >>>> Label editor (enter '?' for help at any prompt)
> >>>>> a a
> >>>> offset: [0]
> >>>> size: [585937500] *
> >>>> Rounding size to cylinder (5136 sectors): 585935424
> >>>> FS type: [4.2BSD] RAID
> >>>>> w
> >>>>> q
> >>>> No label changes.
> >>>> # disklabel sd0 > layout
> >>>>
> >>>> # disklabel -R sd2 layout
> >>>>
> >>>> # rm layout
> >>>>
> >>>> # bioctl -c 1 -l sd0a,sd2a softraid0
> >>>>
> >>>> sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct
> >>>> fixed
> >>>>
> >>>> sd3: 286101MB, 512 bytes/sector, 585934896 sectors
> >>>>
> >>>> softraid0: RAID 1 volume attached as sd3
> >>>> # dd if=/dev/zero of=/dev/rsd3c bs=1m count=1
> >>>>
> >>>> 1+0 records in
> >>>> 1+0 records out
> >>>> 1048576 bytes transferred in 0.104 secs (10063131 bytes/sec)
> >>>> # bioctl sd3
> >>>>
> >>>> Volume Status Size Device
> >>>> softraid0 0 Online 299998666752 sd3 RAID1
> >>>> 0 Online 299998666752 0:0.0 noencl <sd0a>
> >>>> 1 Online 299998666752 0:1.0 noencl <sd2a>
> >>>> # install
> >>>>
> >>>> At any prompt except password prompts you can escape to a shell by
> >>>> typing '!'. Default answers are shown in []'s and are selected by
> >>>> pressing RETURN. You can exit this program at any time by pressing
> >>>> Control-C, but this can leave your system in an inconsistent state.
> >>>>
> >>>> System hostname? (short form, e.g. 'foo') NAS
> >>>>
> >>>> Available network interfaces are: em0 em1 em2 em3 cdce0 vlan0.
> >>>> Which network interface do you wish to configure? (or 'done') [em0]
> >>>> IPv4 address for em0? (or 'dhcp' or 'none') [dhcp]
> >>>> em0: DHCPDISCOVER - interval 1
> >>>> em0: DHCPOFFER from 172.17.2.1 (a0:36:9f:a1:0d:e7)
> >>>> em0: DHCPREQUEST to 255.255.255.255
> >>>> em0: DHCPACK from 172.17.2.1 (a0:36:9f:a1:0d:e7)
> >>>> em0: bound to 172.17.2.23 -- renewal in 21600 seconds
> >>>> IPv6 address for em0? (or 'autoconf' or 'none') [none]
> >>>> Available network interfaces are: em0 em1 em2 em3 cdce0 vlan0.
> >>>> Which network interface do you wish to configure? (or 'done') [done]
> >>>> Default IPv4 route? (IPv4 address or none) [172.17.2.1]
> >>>> add net default: gateway 172.17.2.1
> >>>> DNS domain name? (e.g. 'example.com') [my.domain]
> >>>> Using DNS nameservers at 192.168.1.1
> >>>>
> >>>> Password for root account? (will not echo)
> >>>> Password for root account? (again)
> >>>> Start sshd(8) by default? [yes]
> >>>> Setup a user? (enter a lower-case loginname, or 'no') [no] bsduser
> >>>> Full name for user bsduser? [bsduser]
> >>>> Password for user bsduser? (will not echo)
> >>>> Password for user bsduser? (again)
> >>>> WARNING: root is targeted by password guessing attacks, pubkeys are
> >>>> safer.
> >>>> Allow root ssh login? (yes, no, prohibit-password) [no] yes
> >>>> What timezone are you in? ('?' for list) [Canada/Pacific]
> >>>>
> >>>> Available disks are: sd0 sd1 sd2 sd3.
> >>>> Which disk is the root disk? ('?' for details) [sd0] sd3
> >>>> The auto-allocated layout for sd3 is:
> >>>> # size offset fstype [fsize bsize cpg]
> >>>> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> >>>> b: 27.2G 2104515 swap
> >>>> c: 279.4G 0 unused
> >>>> d: 4.0G 59199525 4.2BSD 2048 16384 1 #
> >>>>/tmp
> >>>> e: 35.4G 67601520 4.2BSD 2048 16384 1 #
> >>>>/var
> >>>> f: 2.0G 141773625 4.2BSD 2048 16384 1 #
> >>>>/usr
> >>>> g: 1.0G 145982655 4.2BSD 2048 16384 1 #
> >>>>/usr/X11R6
> >>>> h: 10.0G 148087170 4.2BSD 2048 16384 1 #
> >>>>/usr/local
> >>>> i: 2.0G 169068060 4.2BSD 2048 16384 1 #
> >>>>/usr/src
> >>>> j: 6.0G 173277090 4.2BSD 2048 16384 1 #
> >>>>/usr/obj
> >>>> k: 190.8G 185872050 4.2BSD 4096 32768 1 #
> >>>>/home
> >>>> Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] e
> >>>> This platform requires that partition offsets/sizes be on cylinder
> >>>> boundaries.
> >>>> Partition offsets/sizes will be rounded to the nearest cylinder
> >>>> automatically.
> >>>> Label editor (enter '?' for help at any prompt)
> >>>>> p g
> >>>> OpenBSD area: 0-585934896; size: 279.4G; free: 0.0G
> >>>> # size offset fstype [fsize bsize cpg]
> >>>> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> >>>> b: 27.2G 2104515 swap
> >>>> c: 279.4G 0 unused
> >>>> d: 4.0G 59199525 4.2BSD 2048 16384 1 #
> >>>>/tmp
> >>>> e: 35.4G 67601520 4.2BSD 2048 16384 1 #
> >>>>/var
> >>>> f: 2.0G 141773625 4.2BSD 2048 16384 1 #
> >>>>/usr
> >>>> g: 1.0G 145982655 4.2BSD 2048 16384 1 #
> >>>>/usr/X11R6
> >>>> h: 10.0G 148087170 4.2BSD 2048 16384 1 #
> >>>>/usr/local
> >>>> i: 2.0G 169068060 4.2BSD 2048 16384 1 #
> >>>>/usr/src
> >>>> j: 6.0G 173277090 4.2BSD 2048 16384 1 #
> >>>>/usr/obj
> >>>> k: 190.8G 185872050 4.2BSD 4096 32768 1 #
> >>>>/home
> >>>>> R b
> >>>> [+|-]new size (with unit): [57095010] 8g
> >>>>> p g
> >>>> OpenBSD area: 0-585934896; size: 279.4G; free: 19.2G
> >>>> # size offset fstype [fsize bsize cpg]
> >>>> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> >>>> b: 8.0G 2104515 swap
> >>>> c: 279.4G 0 unused
> >>>> d: 4.0G 18892440 4.2BSD 2048 16384 1 #
> >>>>/tmp
> >>>> e: 35.4G 27294435 4.2BSD 2048 16384 1 #
> >>>>/var
> >>>> f: 2.0G 101466540 4.2BSD 2048 16384 1 #
> >>>>/usr
> >>>> g: 1.0G 105675570 4.2BSD 2048 16384 1 #
> >>>>/usr/X11R6
> >>>> h: 10.0G 107780085 4.2BSD 2048 16384 1 #
> >>>>/usr/local
> >>>> i: 2.0G 128760975 4.2BSD 2048 16384 1 #
> >>>>/usr/src
> >>>> j: 6.0G 132970005 4.2BSD 2048 16384 1 #
> >>>>/usr/obj
> >>>> k: 190.8G 145564965 4.2BSD 4096 32768 1 #
> >>>>/home
> >>>>> R f
> >>>> [+|-]new size (with unit): [4209030] 10g
> >>>>> p g
> >>>> OpenBSD area: 0-585934896; size: 279.4G; free: 11.2G
> >>>> # size offset fstype [fsize bsize cpg]
> >>>> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> >>>> b: 8.0G 2104515 swap
> >>>> c: 279.4G 0 unused
> >>>> d: 4.0G 18892440 4.2BSD 2048 16384 1 #
> >>>>/tmp
> >>>> e: 35.4G 27294435 4.2BSD 2048 16384 1 #
> >>>>/var
> >>>> f: 10.0G 101466540 4.2BSD 2048 16384 1 #
> >>>>/usr
> >>>> g: 1.0G 122447430 4.2BSD 2048 16384 1 #
> >>>>/usr/X11R6
> >>>> h: 10.0G 124551945 4.2BSD 2048 16384 1 #
> >>>>/usr/local
> >>>> i: 2.0G 145532835 4.2BSD 2048 16384 1 #
> >>>>/usr/src
> >>>> j: 6.0G 149741865 4.2BSD 2048 16384 1 #
> >>>>/usr/obj
> >>>> k: 190.8G 162336825 4.2BSD 4096 32768 1 #
> >>>>/home
> >>>>> R i
> >>>> [+|-]new size (with unit): [4209030] 4g
> >>>>> p g
> >>>> OpenBSD area: 0-585934896; size: 279.4G; free: 9.2G
> >>>> # size offset fstype [fsize bsize cpg]
> >>>> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> >>>> b: 8.0G 2104515 swap
> >>>> c: 279.4G 0 unused
> >>>> d: 4.0G 18892440 4.2BSD 2048 16384 1 #
> >>>>/tmp
> >>>> e: 35.4G 27294435 4.2BSD 2048 16384 1 #
> >>>>/var
> >>>> f: 10.0G 101466540 4.2BSD 2048 16384 1 #
> >>>>/usr
> >>>> g: 1.0G 122447430 4.2BSD 2048 16384 1 #
> >>>>/usr/X11R6
> >>>> h: 10.0G 124551945 4.2BSD 2048 16384 1 #
> >>>>/usr/local
> >>>> i: 4.0G 145532835 4.2BSD 2048 16384 1 #
> >>>>/usr/src
> >>>> j: 6.0G 153934830 4.2BSD 2048 16384 1 #
> >>>>/usr/obj
> >>>> k: 190.8G 166529790 4.2BSD 4096 32768 1 #
> >>>>/home
> >>>>> R k
> >>>> [+|-]new size (with unit): [400050630] 200g
> >>>> Amount too big
> >>>>> 199# ## ## #R e
> >>>> [+|-]new size (with unit): [74172105] 35g
> >>>>> R k
> >>>> [+|-]new size (with unit): [400050630] 200g
> >>>>> p g
> >>>> OpenBSD area: 0-585934896; size: 279.4G; free: 0.4G
> >>>> # size offset fstype [fsize bsize cpg]
> >>>> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> >>>> b: 8.0G 2104515 swap
> >>>> c: 279.4G 0 unused
> >>>> d: 4.0G 18892440 4.2BSD 2048 16384 1 #
> >>>>/tmp
> >>>> e: 35.0G 27294435 4.2BSD 2048 16384 1 #
> >>>>/var
> >>>> f: 10.0G 100695420 4.2BSD 2048 16384 1 #
> >>>>/usr
> >>>> g: 1.0G 121676310 4.2BSD 2048 16384 1 #
> >>>>/usr/X11R6
> >>>> h: 10.0G 123780825 4.2BSD 2048 16384 1 #
> >>>>/usr/local
> >>>> i: 4.0G 144761715 4.2BSD 2048 16384 1 #
> >>>>/usr/src
> >>>> j: 6.0G 153163710 4.2BSD 2048 16384 1 #
> >>>>/usr/obj
> >>>> k: 200.0G 165758670 4.2BSD 4096 32768 1 #
> >>>>/home
> >>>>> w
> >>>>> q
> >>>> No label changes.
> >>>> /dev/rsd3a: 1027.6MB in 2104512 sectors of 512 bytes
> >>>> 6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> >>>> /dev/rsd3k: 204805.2MB in 419441080 sectors of 512 bytes
> >>>> 252 cylinder groups of 814.44MB, 26062 blocks, 52224 inodes each
> >>>> /dev/rsd3d: 4102.5MB in 8401992 sectors of 512 bytes
> >>>> 21 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> >>>> /dev/rsd3f: 10244.6MB in 20980888 sectors of 512 bytes
> >>>> 51 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> >>>> /dev/rsd3g: 1027.6MB in 2104512 sectors of 512 bytes
> >>>> 6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> >>>> /dev/rsd3h: 10244.6MB in 20980888 sectors of 512 bytes
> >>>> 51 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> >>>> /dev/rsd3j: 6149.9MB in 12594960 sectors of 512 bytes
> >>>> 31 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> >>>> /dev/rsd3i: 4102.5MB in 8401992 sectors of 512 bytes
> >>>> 21 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> >>>> /dev/rsd3e: 35840.3MB in 73400984 sectors of 512 bytes
> >>>> 178 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> >>>> Available disks are: sd0 sd1 sd2.
> >>>> Which disk do you wish to initialize? (or 'done') [done]
> >>>> /dev/sd3a (8db1efc313479eda.a) on /mnt type ffs (rw, asynchronous, local)
> >>>> /dev/sd3k (8db1efc313479eda.k) on /mnt/home type ffs (rw, asynchronous,
> >>>> local, nodev, nosuid)
> >>>> /dev/sd3d (8db1efc313479eda.d) on /mnt/tmp type ffs (rw, asynchronous,
> >>>> local, nodev, nosuid)
> >>>> /dev/sd3f (8db1efc313479eda.f) on /mnt/usr type ffs (rw, asynchronous,
> >>>> local, nodev)
> >>>> /dev/sd3g (8db1efc313479eda.g) on /mnt/usr/X11R6 type ffs (rw,
> >>>> asynchronous, local, nodev)
> >>>> /dev/sd3h (8db1efc313479eda.h) on /mnt/usr/local type ffs (rw,
> >>>> asynchronous, local, nodev)
> >>>> /dev/sd3j (8db1efc313479eda.j) on /mnt/usr/obj type ffs (rw,
> >>>> asynchronous, local, nodev, nosuid)
> >>>> /dev/sd3i (8db1efc313479eda.i) on /mnt/usr/src type ffs (rw,
> >>>> asynchronous, local, nodev, nosuid)
> >>>> /dev/sd3e (8db1efc313479eda.e) on /mnt/var type ffs (rw, asynchronous,
> >>>> local, nodev, nosuid)
> >>>>
> >>>> Let's install the sets!
> >>>> Location of sets? (cd0 cd1 disk http or 'done') [http]
> >>>> HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none]
> >>>> HTTP Server? (hostname, list#, 'done' or '?') [ftp.OpenBSD.org]
> >>>> Server directory? [pub/OpenBSD/6.2/sparc64]
> >>>>
> >>>> Select sets by entering a set name, a file name pattern or 'all'.
> >>>> De-select
> >>>> sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled
> >>>> '[X]'.
> >>>> [X] bsd [X] base62.tgz [X] game62.tgz [X]
> >>>>xfont62.tgz
> >>>> [X] bsd.mp [X] comp62.tgz [X] xbase62.tgz [X]
> >>>>xserv62.tgz
> >>>> [X] bsd.rd [X] man62.tgz [X] xshare62.tgz
> >>>> Set name(s)? (or 'abort' or 'done') [done]
> >>>>
> >>>> Get/Verify SHA256.sig 0% | | 0
> >>>> --:-- ETA
> >>>> Get/Verify SHA256.sig 100% |**************************| 1985
> >>>> 00:00
> >>>> Signature Verified
> >>>>
> >>>> Get/Verify bsd 0% | | 0
> >>>> --:-- ETA
> >>>> Get/Verify bsd 6% |* | 640 KB
> >>>> 00:14 ETA
> >>>> Get/Verify bsd 22% |***** | 2176 KB
> >>>> 00:07 ETA
> >>>> Get/Verify bsd 49% |************ | 4864 KB
> >>>> 00:03 ETA
> >>>> Get/Verify bsd 84% |********************* | 8320 KB
> >>>> 00:00 ETA
> >>>> Get/Verify bsd 100% |**************************| 9834 KB
> >>>> 00:04
> >>>>
> >>>> Get/Verify bsd.mp 0% | | 0
> >>>> --:-- ETA
> >>>> Get/Verify bsd.mp 7% |* | 768 KB
> >>>> 00:12 ETA
> >>>> Get/Verify bsd.mp 24% |****** | 2432 KB
> >>>> 00:06 ETA
> >>>> Get/Verify bsd.mp 50% |************* | 4992 KB
> >>>> 00:02 ETA
> >>>> Get/Verify bsd.mp 82% |********************* | 8192 KB
> >>>> 00:00 ETA
> >>>> Get/Verify bsd.mp 100% |**************************| 9886 KB
> >>>> 00:04
> >>>>
> >>>> Get/Verify bsd.rd 0% | | 0
> >>>> --:-- ETA
> >>>> Get/Verify bsd.rd 28% |******* | 768 KB
> >>>> 00:02 ETA
> >>>> Get/Verify bsd.rd 95% |************************ | 2560 KB
> >>>> 00:00 ETA
> >>>> Get/Verify bsd.rd 95% |************************ | 2560 KB
> >>>> 00:00 ETA
> >>>> Get/Verify bsd.rd 100% |**************************| 2668 KB
> >>>> 00:03
> >>>>
> >>>> Get/Verify base62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Get/Verify base62.tgz 0% | | 640 KB
> >>>> 02:56 ETA
> >>>> Get/Verify base62.tgz 1% | | 2176 KB
> >>>> 01:40 ETA
> >>>> Get/Verify base62.tgz 4% |* | 4608 KB
> >>>> 01:09 ETA
> >>>> Get/Verify base62.tgz 6% |* | 7424 KB
> >>>> 00:56 ETA
> >>>> Get/Verify base62.tgz 9% |** | 11008 KB
> >>>> 00:45 ETA
> >>>> Get/Verify base62.tgz 14% |*** | 15744 KB
> >>>> 00:36 ETA
> >>>> Get/Verify base62.tgz 18% |**** | 20224 KB
> >>>> 00:31 ETA
> >>>> Get/Verify base62.tgz 24% |****** | 26624 KB
> >>>> 00:25 ETA
> >>>> Get/Verify base62.tgz 26% |****** | 29312 KB
> >>>> 00:25 ETA
> >>>> Get/Verify base62.tgz 28% |******* | 32128 KB
> >>>> 00:24 ETA
> >>>> Get/Verify base62.tgz 31% |******** | 35072 KB
> >>>> 00:23 ETA
> >>>> Get/Verify base62.tgz 34% |******** | 38272 KB
> >>>> 00:22 ETA
> >>>> Get/Verify base62.tgz 37% |********* | 41600 KB
> >>>> 00:21 ETA
> >>>> Get/Verify base62.tgz 40% |********** | 45056 KB
> >>>> 00:20 ETA
> >>>> Get/Verify base62.tgz 43% |*********** | 48640 KB
> >>>> 00:19 ETA
> >>>> Get/Verify base62.tgz 47% |************ | 52352 KB
> >>>> 00:17 ETA
> >>>> Get/Verify base62.tgz 50% |************* | 55424 KB
> >>>> 00:17 ETA
> >>>> Get/Verify base62.tgz 53% |************* | 59008 KB
> >>>> 00:15 ETA
> >>>> Get/Verify base62.tgz 56% |************** | 62080 KB
> >>>> 00:14 ETA
> >>>> Get/Verify base62.tgz 59% |*************** | 65920 KB
> >>>> 00:13 ETA
> >>>> Get/Verify base62.tgz 62% |**************** | 68992 KB
> >>>> 00:12 ETA
> >>>> Get/Verify base62.tgz 65% |**************** | 72960 KB
> >>>> 00:11 ETA
> >>>> Get/Verify base62.tgz 68% |***************** | 76032 KB
> >>>> 00:10 ETA
> >>>> Get/Verify base62.tgz 72% |****************** | 80000 KB
> >>>> 00:09 ETA
> >>>> Get/Verify base62.tgz 76% |******************* | 84224 KB
> >>>> 00:07 ETA
> >>>> Get/Verify base62.tgz 80% |******************** | 88704 KB
> >>>> 00:06 ETA
> >>>> Get/Verify base62.tgz 83% |********************* | 93056 KB
> >>>> 00:05 ETA
> >>>> Get/Verify base62.tgz 88% |********************** | 97920 KB
> >>>> 00:03 ETA
> >>>> Get/Verify base62.tgz 92% |*********************** | 100 MB
> >>>> 00:02 ETA
> >>>> Get/Verify base62.tgz 97% |************************* | 105 MB
> >>>> 00:00 ETA
> >>>> Get/Verify base62.tgz 100% |**************************| 108 MB
> >>>> 00:30
> >>>>
> >>>> Get/Verify comp62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Get/Verify comp62.tgz 1% | | 896 KB
> >>>> 00:52 ETA
> >>>> Get/Verify comp62.tgz 5% |* | 2816 KB
> >>>> 00:31 ETA
> >>>> Get/Verify comp62.tgz 11% |** | 5632 KB
> >>>> 00:22 ETA
> >>>> Get/Verify comp62.tgz 19% |**** | 9344 KB
> >>>> 00:16 ETA
> >>>> Get/Verify comp62.tgz 29% |******* | 13952 KB
> >>>> 00:11 ETA
> >>>> Get/Verify comp62.tgz 41% |********** | 19456 KB
> >>>> 00:08 ETA
> >>>> Get/Verify comp62.tgz 54% |************** | 25600 KB
> >>>> 00:05 ETA
> >>>> Get/Verify comp62.tgz 67% |***************** | 31744 KB
> >>>> 00:03 ETA
> >>>> Get/Verify comp62.tgz 83% |********************* | 39552 KB
> >>>> 00:01 ETA
> >>>> Get/Verify comp62.tgz 99% |************************* | 47104 KB
> >>>> 00:00 ETA
> >>>> Get/Verify comp62.tgz 100% |**************************| 47128 KB
> >>>> 00:10
> >>>>
> >>>> Get/Verify man62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Get/Verify man62.tgz 9% |** | 640 KB
> >>>> 00:10 ETA
> >>>> Get/Verify man62.tgz 29% |******* | 2048 KB
> >>>> 00:04 ETA
> >>>> Get/Verify man62.tgz 63% |**************** | 4480 KB
> >>>> 00:01 ETA
> >>>> Get/Verify man62.tgz 98% |************************* | 6912 KB
> >>>> 00:00 ETA
> >>>> Get/Verify man62.tgz 100% |**************************| 7015 KB
> >>>> 00:04
> >>>>
> >>>> Get/Verify game62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Get/Verify game62.tgz 36% |********* | 1024 KB
> >>>> 00:01 ETA
> >>>> Get/Verify game62.tgz 95% |************************ | 2688 KB
> >>>> 00:00 ETA
> >>>> Get/Verify game62.tgz 100% |**************************| 2806 KB
> >>>> 00:02
> >>>>
> >>>> Get/Verify xbase62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Get/Verify xbase62.tgz 3% | | 640 KB
> >>>> 00:26 ETA
> >>>> Get/Verify xbase62.tgz 12% |*** | 2176 KB
> >>>> 00:14 ETA
> >>>> Get/Verify xbase62.tgz 26% |****** | 4608 KB
> >>>> 00:08 ETA
> >>>> Get/Verify xbase62.tgz 45% |*********** | 7936 KB
> >>>> 00:04 ETA
> >>>> Get/Verify xbase62.tgz 62% |**************** | 10880 KB
> >>>> 00:03 ETA
> >>>> Get/Verify xbase62.tgz 85% |********************** | 14976 KB
> >>>> 00:01 ETA
> >>>> Get/Verify xbase62.tgz 100% |**************************| 17472 KB
> >>>> 00:06
> >>>>
> >>>> Get/Verify xshare62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Get/Verify xshare62.tgz 14% |*** | 640 KB
> >>>> 00:05 ETA
> >>>> Get/Verify xshare62.tgz 52% |************* | 2304 KB
> >>>> 00:01 ETA
> >>>> Get/Verify xshare62.tgz 98% |************************* | 4352 KB
> >>>> 00:00 ETA
> >>>> Get/Verify xshare62.tgz 98% |************************* | 4352 KB
> >>>> 00:00 ETA
> >>>> Get/Verify xshare62.tgz 100% |**************************| 4419 KB
> >>>> 00:04
> >>>>
> >>>> Get/Verify xfont62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Get/Verify xfont62.tgz 1% | | 768 KB
> >>>> 00:51 ETA
> >>>> Get/Verify xfont62.tgz 6% |* | 2688 KB
> >>>> 00:27 ETA
> >>>> Get/Verify xfont62.tgz 13% |*** | 5504 KB
> >>>> 00:18 ETA
> >>>> Get/Verify xfont62.tgz 22% |***** | 8832 KB
> >>>> 00:13 ETA
> >>>> Get/Verify xfont62.tgz 33% |******** | 13312 KB
> >>>> 00:09 ETA
> >>>> Get/Verify xfont62.tgz 47% |************ | 18560 KB
> >>>> 00:06 ETA
> >>>> Get/Verify xfont62.tgz 61% |*************** | 24064 KB
> >>>> 00:04 ETA
> >>>> Get/Verify xfont62.tgz 77% |******************** | 30592 KB
> >>>> 00:02 ETA
> >>>> Get/Verify xfont62.tgz 97% |************************* | 38400 KB
> >>>> 00:00 ETA
> >>>> Get/Verify xfont62.tgz 100% |**************************| 39351 KB
> >>>> 00:09
> >>>>
> >>>> Get/Verify xserv62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Get/Verify xserv62.tgz 6% |* | 640 KB
> >>>> 00:15 ETA
> >>>> Get/Verify xserv62.tgz 22% |***** | 2304 KB
> >>>> 00:06 ETA
> >>>> Get/Verify xserv62.tgz 46% |*********** | 4736 KB
> >>>> 00:03 ETA
> >>>> Get/Verify xserv62.tgz 78% |******************** | 8064 KB
> >>>> 00:01 ETA
> >>>> Get/Verify xserv62.tgz 100% |**************************| 10266 KB
> >>>> 00:04
> >>>>
> >>>> Installing bsd 0% | | 0
> >>>> --:-- ETA
> >>>> Installing bsd 100% |**************************| 9834 KB
> >>>> 00:00
> >>>>
> >>>> Installing bsd.mp 0% | | 0
> >>>> --:-- ETA
> >>>> Installing bsd.mp 100% |**************************| 9886 KB
> >>>> 00:00
> >>>>
> >>>> Installing bsd.rd 0% | | 0
> >>>> --:-- ETA
> >>>> Installing bsd.rd 100% |**************************| 2668 KB
> >>>> 00:00
> >>>>
> >>>> Installing base62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Installing base62.tgz 11% |** | 12672 KB
> >>>> 00:07 ETA
> >>>> Installing base62.tgz 21% |***** | 23936 KB
> >>>> 00:07 ETA
> >>>> Installing base62.tgz 29% |******* | 32640 KB
> >>>> 00:07 ETA
> >>>> Installing base62.tgz 34% |******** | 38528 KB
> >>>> 00:07 ETA
> >>>> Installing base62.tgz 40% |********** | 44416 KB
> >>>> 00:07 ETA
> >>>> Installing base62.tgz 45% |*********** | 50816 KB
> >>>> 00:07 ETA
> >>>> Installing base62.tgz 65% |**************** | 72576 KB
> >>>> 00:03 ETA
> >>>> Installing base62.tgz 96% |************************ | 104 MB
> >>>> 00:00 ETA
> >>>> Installing base62.tgz 100% |**************************| 108 MB
> >>>> 00:08
> >>>>
> >>>> Extracting etc.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Extracting etc.tgz 100% |**************************| 189 KB
> >>>> 00:00
> >>>>
> >>>> Installing comp62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Installing comp62.tgz 25% |****** | 12032 KB
> >>>> 00:02 ETA
> >>>> Installing comp62.tgz 44% |*********** | 20992 KB
> >>>> 00:02 ETA
> >>>> Installing comp62.tgz 66% |***************** | 31360 KB
> >>>> 00:01 ETA
> >>>> Installing comp62.tgz 77% |******************** | 36480 KB
> >>>> 00:01 ETA
> >>>> Installing comp62.tgz 99% |************************* | 47104 KB
> >>>> 00:00 ETA
> >>>> Installing comp62.tgz 100% |**************************| 47128 KB
> >>>> 00:05
> >>>>
> >>>> Installing man62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Installing man62.tgz 87% |********************** | 6144 KB
> >>>> 00:00 ETA
> >>>> Installing man62.tgz 100% |**************************| 7015 KB
> >>>> 00:01
> >>>>
> >>>> Installing game62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Installing game62.tgz 100% |**************************| 2806 KB
> >>>> 00:00
> >>>>
> >>>> Installing xbase62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Installing xbase62.tgz 54% |************** | 9600 KB
> >>>> 00:00 ETA
> >>>> Installing xbase62.tgz 93% |************************ | 16384 KB
> >>>> 00:00 ETA
> >>>> Installing xbase62.tgz 100% |**************************| 17472 KB
> >>>> 00:02
> >>>>
> >>>> Extracting xetc.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Extracting xetc.tgz 100% |**************************| 7040
> >>>> 00:00
> >>>>
> >>>> Installing xshare62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Installing xshare62.tgz 63% |**************** | 2816 KB
> >>>> 00:00 ETA
> >>>> Installing xshare62.tgz 95% |************************ | 4224 KB
> >>>> 00:00 ETA
> >>>> Installing xshare62.tgz 100% |**************************| 4419 KB
> >>>> 00:02
> >>>>
> >>>> Installing xfont62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Installing xfont62.tgz 40% |********** | 16128 KB
> >>>> 00:01 ETA
> >>>> Installing xfont62.tgz 68% |***************** | 27008 KB
> >>>> 00:00 ETA
> >>>> Installing xfont62.tgz 96% |************************ | 38016 KB
> >>>> 00:00 ETA
> >>>> Installing xfont62.tgz 100% |**************************| 39351 KB
> >>>> 00:03
> >>>>
> >>>> Installing xserv62.tgz 0% | | 0
> >>>> --:-- ETA
> >>>> Installing xserv62.tgz 100% |**************************| 10266 KB
> >>>> 00:00
> >>>> Location of sets? (cd0 cd1 disk http or 'done') [done]
> >>>> Saving configuration files...done.
> >>>> Making all device nodes...done.
> >>>> Multiprocessor machine; using bsd.mp instead of bsd.
> >>>> Relinking to create unique kernel...done.
> >>>>
> >>>> CONGRATULATIONS! Your OpenBSD install has been successfully completed!
> >>>> To boot the new system, enter 'reboot' at the command prompt.
> >>>> When you login to your new system the first time, please read your mail
> >>>> using the 'mail' command.
> > Did you:
> >
> > # newfs /dev/rsd(whichever is correct)
> >
> > before reboot?
> >
> > Did you:
> >
> > cp your kernels to the new sd's
> >
> > I think you also need to installboot(8) as well
> >>>> # reboot
> >>>>
> >>>> syncing disks... done
> >>>>
> >>>> sd3 detached
> >>>>
> >>>> rebooting
> >>>>
> >>>>
> >>>> NOTICE: Entering OpenBoot.
> >>>> NOTICE: Fetching Guest MD from HV.
> >>>> NOTICE: Starting additional cpus.
> >>>> NOTICE: Initializing LDC services.
> >>>> NOTICE: Probing PCI devices.
> >>>> NOTICE: Finished PCI probing.
> >>>>
> >>>> SPARC T4-1, No Keyboard
> >>>> Copyright (c) 1998, 2016, Oracle and/or its affiliates. All rights
> >>>> reserved.
> >>>> OpenBoot 4.38.5, 127.5000 GB memory available, Serial #104767966.
> >>>> Ethernet address 0:10:e0:3e:a1:de, Host ID: 863ea1de.
> >>>>
> >>>>
> >>>>
> >>>> Boot device: disk0 File and args: sr0a:/bsd
> >>>> OpenBSD IEEE 1275 Bootblock 1.4
> >>>>>> OpenBSD BOOT 1.9
> >>>> ERROR: /iscsi-hba: No iscsi-network-bootpath property
> >>>> Unknown device: sr0
> >>>> Cannot boot from softraid: Unknown error: code 19
> >>>> Program terminated
> >>>> {0} ok
> >>>>
> >>>>
> >>>>
> >>>> On 12/27/17 04:52, Stefan Sperling wrote:
> >>>>> On Tue, Dec 26, 2017 at 12:56:53PM -0800, Jordan wrote:
> >>>>>> The install procedure I followed on the T4 was:
> >>>>>>
> >>>>>> 1) Boot install kernel and drop to shell and provision RAID partitions
> >>>>>> on
> >>>>>> both disks using the letter ???a??? via disklabel(8)
> >>>>>>
> >>>>>> 2) Assemble RAID volume with # bioctl -c 1 -l /dev/sd0a,/dev/sd1a
> >>>>>> softraid0
> >>>>>>
> >>>>>> 3) I zeroed the first 10MB of the RAID volume with # dd if=/dev/urandom
> >>>>>> of=/dev/rsd2c bs=1m
> >>>>> Step 3 might get you in trouble. You're writing to the raw disk device
> >>>>> so this command might nuke disklabel and/or softraid meta data.
> >>>>>
> >>>>>> 4) I finished off the install as usual by typing ???install??? into
> >>>>>> command line
> >>>>>> and proceeded normally
> >>>>>>
> >>>>>> 5) I then rebooted and set the boot parameters at the ok prompt as per
> >>>>>> boot_sparc(8)
> >>>>>> In short, on sparc64, is softraid boot like that of i386/amd64 where
> >>>>>> everything including root is stored within the RAID volume,
> >>>>> Yes, except as mentioned the RAID fs needs to be on an 'a' partition.
> >>>>>
> >>>>>> or does sparc64
> >>>>>> require me to have a small partition at the beginning of my physical
> >>>>>> disks
> >>>>>> containing the kernel and ofwboot?
> >>>>> No it does not.
>
