The bottom of your dmesg appears to indicate your HD is dying--act fast.
Simon Morgan wrote:
> This morning my server started rebooting itself constantly for about
> 15
> minutes. Although the last log seems to indicate that at least 1 crash
> occured, no core dumps are to be found in /var/crash and I couldn't
> find anything pertinent in the system logs. I'm thinking flaky
> hardware
> but, short of plugging in a monitor and sitting watching it, is there
> anything I can do to trace the source of the problem? I ran memtest86+
> on the machine not too long ago and I'll do so again in the meantime.
>
> Thanks.
>
> $ last|head
> root ttyC0 Sat Jan 28 07:57 still
> logged in
> reboot ~ Sat Jan 28 07:57
> simon ttyp0 bainbridge.16hz.net Sat Jan 28 07:55 - crash
> (00:02)
> reboot ~ Sat Jan 28 07:54
> reboot ~ Sat Jan 28 07:47
> reboot ~ Sat Jan 28 07:42
> $ ls -l /var/crash/
> total 4
> -rw-r--r-- 1 root wheel 5 Sep 10 22:15 minfree
> $ dmesg
> OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD-K6(tm) 3D processor ("AuthenticAMD" 586-class) 501 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
> real mem = 402223104 (392796K)
> avail mem = 359772160 (351340K)
> using 4278 buffers containing 20213760 bytes (19740K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(c2) BIOS, date 05/02/02, BIOS32 rev. 0 @
> 0xf06f0
> apm0 at bios0: Power Management spec V1.2 (BIOS mgmt disabled)
> apm0: APM power management enable: unrecognized device ID (9)
> apm0: APM engage (device 1): power management disabled (1)
> apm0: AC on, battery charge unknown
> apm0: flags b0102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xda2
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0d00/160 (8 entries)
> pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1533 ISA" rev
> 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Acer Labs M1541 PCI" rev 0x04
> ppb0 at pci0 dev 1 function 0 "Acer Labs M5243 AGP/PCI-PCI" rev 0x04
> pci1 at ppb0 bus 1
> ohci0 at pci0 dev 2 function 0 "Acer Labs M5237 USB" rev 0x03: irq
> 12, version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> "Acer Labs M7101 Power" rev 0x00 at pci0 dev 3 function 0 not
> configured
> pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0xc3
> de0 at pci0 dev 10 function 0 "DEC 21140" rev 0x22: irq 5
> de0: pass 2.2 address 00:80:c8:64:20:47
> vga1 at pci0 dev 12 function 0 "3DFX Interactive Voodoo3" rev 0x01
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> rl0 at pci0 dev 13 function 0 "Realtek 8139" rev 0x10: irq 10 address
> 00:50:bf:ea:31:9f
> rlphy0 at rl0 phy 0: RTL internal phy
> pciide0 at pci0 dev 15 function 0 "Acer Labs M5229 UDMA IDE" rev
> 0xc1: DMA, channel 0 configured to compatibility, channel 1
> configured to compatibility wd0 at pciide0 channel 0 drive 0: <Maxtor
> 92041U4>
> wd0: 16-sector PIO, LBA, 19541MB, 40020624 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CR-4802TE, 2.1D> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 3, DMA mode 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> lm0 at isa0 port 0x290/8: W83781D
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask fb45 netmask ff65 ttymask ffe7
> pctr: user-level cycle counter enabled
> mtrr: K6-family MTRR support (2 registers)
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> WARNING: / was not properly unmounted
> wd0a: DMA error reading fsbn 41984 of 41984-42015 (wd0 bn 42047; cn
> 41 tn 11 sn 26), retrying
> wd0: soft error (corrected)
> wd0: transfer error, downgrading to Ultra-DMA mode 1
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1
> wd0a: DMA error reading fsbn 41824 of 41824-41855 (wd0 bn 41887; cn
> 41 tn 8 sn 55), retrying
> wd0: soft error (corrected)
