Hello,
I'm trying to breath some life into some Sun T5120's that no longer
have oracle support for by switching them to OpenBSD6.2.
The issue I'm having is when I go to dump the contents of the
NVRAM config into the current working directory to copy for my new
config, the ldomctl dump command never completes.
I don't know what the expected behavior is as I've never run OpenBSD as
the primary domain before. However after letting ldomctl dump run for
over an hour all I have is one file and the process is still running:
-rw-r--r-- 1 root wheel 23168 Dec 1 18:37 hv.md
I've tried running ldomd in the foreground to see if there is any sort
of error but it seems to all be running okay. Before I cleared the
system of all my old LDOMs ldomctl was seeing them fine and was able to
access them.
Can anyone who has run this before tell me if ldomctl dump just takes a
really long time or possibly shed some light on where I have gone wrong?
As a side note OpenBSD runs beautifully on these hosts in an ldom. I
have had zero issues. Just trying to stop using Solaris all together
now.
Thanks for any help you can give.
Massive amount of system info follows:
from the service processor:
hypervisor_version = Hypervisor 1.10.7.g 2014/07/10 11:46
obp_version = OpenBoot 4.33.6.f 2014/07/10 10:23
post_version = POST 4.33.6.f 2014/07/10 10:32
sysfw_version = Sun System Firmware 7.4.8.a 2014/10/12 09:186.2
Dmesg:
console is /virtual-devices@100/console@1
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved. Copyright (c) 1995-2017 OpenBSD. All rights reserved.
https://www.OpenBSD.org
OpenBSD 6.2 (GENERIC.MP) #303: Tue Oct 3 22:46:49 MDT 2017
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 68585259008 (65408MB)
avail mem = 67371524096 (64250MB)
warning: no entropy supplied by boot loader
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: SPARC Enterprise T5120
cpu0 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu1 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu2 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu3 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu4 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu5 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu6 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu7 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu8 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu9 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu10 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu11 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu12 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu13 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu14 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu15 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu16 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu17 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu18 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu19 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu20 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu21 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu22 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu23 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu24 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu25 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu26 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu27 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu28 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu29 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu30 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu31 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu32 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu33 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu34 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu35 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu36 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu37 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu38 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu39 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu40 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu41 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu42 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu43 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu44 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu45 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu46 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu47 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu48 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu49 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu50 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu51 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu52 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu53 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu54 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu55 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu56 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu57 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu58 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu59 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu60 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu61 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu62 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu63 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
vbus0 at mainbus0
"flashprom" at vbus0 not configured
"tpm" at vbus0 not configured
cbus0 at vbus0
vldc0 at cbus0
vldcp0 at vldc0 chan 0x14: ivec 0x28, 0x29 channel "spds"
"sunvts" at vldc0 chan 0x6 not configured
"sunmc" at vldc0 chan 0x7 not configured
"explorer" at vldc0 chan 0x8 not configured
"led" at vldc0 chan 0x9 not configured
"flashupdate" at vldc0 chan 0xa not configured
"ipmi" at vldc0 chan 0xc not configured
"system-management" at vldc0 chan 0xd not configured
vldc1 at cbus0
"spfma" at vldc1 chan 0x5 not configured
vldc2 at cbus0
vldcp1 at vldc2 chan 0x0: ivec 0x0, 0x1 channel "hvctl"
"ldom-primary" at vldc2 chan 0x1 not configured
"fmactl" at vldc2 chan 0x3 not configured
vldc3 at cbus0
"ldmfma" at vldc3 chan 0x4 not configured
"virtual-domain-service" at cbus0 not configured
"n2cp" at vbus0 not configured
"ncp" at vbus0 not configured
vrng0 at vbus0
vcons0 at vbus0: ivec 0x111, console
vrtc0 at vbus0
vpci0 at mainbus0: bus 2 to 18, dvma map 80000000-ffffffff
pci0 at vpci0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8533" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8533" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "PLX PEX 8517" rev 0xac
pci3 at ppb2 bus 5
ppb3 at pci3 dev 1 function 0 "PLX PEX 8517" rev 0xac
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "PLX PEX 8112" rev 0xaa
pci5 at ppb4 bus 7
ohci0 at pci5 dev 0 function 0 "NEC USB" rev 0x43: ivec 0x16, version
1.0 ohci1 at pci5 dev 0 function 1 "NEC USB" rev 0x43: ivec 0x17,
version 1.0 ehci0 at pci5 dev 0 function 2 "NEC USB" rev 0x04: ivec 0x14
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev
2.00/1.00 addr 1 usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "NEC OHCI root hub" rev
1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev
1.00/1.00 addr 1 ppb5 at pci3 dev 2 function 0 "PLX PEX 8517" rev 0xac
pci6 at ppb5 bus 8
em0 at pci6 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x17,
address 00:21:28:16:2d:a8 em1 at pci6 dev 0 function 1 "Intel 82571EB"
rev 0x06: ivec 0x14, address 00:21:28:16:2d:a9 ppb6 at pci3 dev 3
function 0 "PLX PEX 8517" rev 0xaa pci7 at ppb6 bus 9
em2 at pci7 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x14,
address 00:21:28:16:2d:aa em3 at pci7 dev 0 function 1 "Intel 82571EB"
rev 0x06: ivec 0x15, address 00:21:28:16:2d:ab ppb7 at pci1 dev 2
function 0 "PLX PEX 8533" rev 0xaa pci8 at ppb7 bus 10
mpi0 at pci8 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x04: msi
mpi0: UNUSED, firmware 1.27.0.0
scsibus1 at mpi0: 112 targets
sd0 at scsibus1 targ 0 lun 0: <HITACHI, H103014SCSUN146G, A2A8> SCSI4
0/direct fixed naa.5000cca00a8b9f18 sd0: 140009MB, 512 bytes/sector,
286739329 sectors sd1 at scsibus1 targ 1 lun 0: <HITACHI,
H103014SCSUN146G, A2A8> SCSI4 0/direct fixed naa.5000cca00a373e18 sd1:
140009MB, 512 bytes/sector, 286739329 sectors sd2 at scsibus1 targ 2
lun 0: <HITACHI, H101414SCSUN146G, SA25> SCSI3 0/direct fixed
naa.5000cca00098e95c sd2: 140009MB, 512 bytes/sector, 286739329 sectors
sd3 at scsibus1 targ 3 lun 0: <HITACHI, H101414SCSUN146G, SA25> SCSI3
0/direct fixed naa.5000cca0008ca1c8 sd3: 140009MB, 512 bytes/sector,
286739329 sectors ppb8 at pci1 dev 8 function 0 "PLX PEX 8533" rev 0xaa
pci9 at ppb8 bus 11 ppb9 at pci9 dev 0 function 0 "PLX PEX 8533" rev
0xaa pci10 at ppb9 bus 12
ppb10 at pci10 dev 1 function 0 "PLX PEX 8533" rev 0xaa: msi
pci11 at ppb10 bus 13
ppb11 at pci10 dev 2 function 0 "PLX PEX 8533" rev 0xaa: msi
pci12 at ppb11 bus 14
ppb12 at pci10 dev 8 function 0 "PLX PEX 8533" rev 0xaa: msi
pci13 at ppb12 bus 15
ppb13 at pci10 dev 9 function 0 "PLX PEX 8533" rev 0xaa: msi
pci14 at ppb13 bus 16
ppb14 at pci10 dev 10 function 0 "PLX PEX 8533" rev 0xaa: msi
pci15 at ppb14 bus 17
ppb15 at pci1 dev 9 function 0 "PLX PEX 8533" rev 0xaa: msi
pci16 at ppb15 bus 18
mpi1 at pci16 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: msi
mpi1: SAS3801E, firmware 1.26.0.0
scsibus2 at mpi1: 173 targets
"niu" at mainbus0 not configured
"pci-performance-counters" at mainbus0 not configured
ebus0 at mainbus0
com0 at ebus0 addr ca0000-ca0007 ivec 0x13: ns16550a, 16 byte fifo
umass0 at uhub0 port 2 configuration 1 interface 0 "Texas Instruments
Incorporated 6250 FW: 04.02.02.22.562AD423" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets,
initiator 0 cd0 at scsibus3 targ 1 lun 0: <TSSTcorp, CD/DVDW TS-T632A,
SR03> SCSI0 5/cdrom removable serial.0451625fB05B31630223 uhub3 at
SR03> uhub0 port 4 configuration 1 interface 0 "Cypress Semiconductor
SR03> USB2 Hub" rev 2.00/0.0b addr 3
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
softraid0: sd4 was not shutdown properly
sd4 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct
fixed sd4: 135696MB, 512 bytes/sector, 277906032 sectors
bootpath: /pci@0,0/pci@0,0/pci@2,0/scsi@0,0/disk@0,0
root on sd4a (924ebb909bc5eb81.a) swap on sd4b dump on sd4b
sd5 at scsibus5 targ 2 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct
fixed sd5: 140009MB, 512 bytes/sector, 286738800 sectors
# ldomctl list
factory-default [current]
# ldomctl status
primary running OpenBSD running
0%
