On 26/01/06, Thordur I. Bjornsson <[EMAIL PROTECTED]> wrote:
>
> Damien Bergamini <[EMAIL PROTECTED]> wrote on Thu 26.Jan'06 at
> 23:02:28 +0100
>
> > Please try to force 11g mode by hand:
> >
> > % ifconfig iwi0 mode 11g
> >
> > I'm pretty sure the firmware crashes when scanning channels in
> > the 5GHz band. This bug should affect 2915ABG adapters only.
> > Scanning of those channels was disabled in 3.8.
> >
> > Damien
>
> # ifconfig iwi0 mode 11g 192.168.2.123 netmask 255.255.255.0 nwid foonet
> nwkey <fooo>
>
> -> Jan 26 23:21:44 hera /bsd: iwi0: fatal error
>
> Running with:
> [EMAIL PROTECTED] ~]$ sysctl kern.version
> kern.version=OpenBSD 3.9-beta (GENERIC) #0: Thu Jan 26 15:11:32 GMT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
>
> (The only reason I recompiled GENERIC was too test performance increase
> with ramdisk
> no src changes.)
>
>
> OpenBSD 3.9-beta (GENERIC) #0: Thu Jan 26 15:11:32 GMT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) M processor 1.73GHz ("GenuineIntel" 686-class)
> 1.73 GHz
> cpu0:
>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI
,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
> cpu0: Enhanced SpeedStep 1300 MHz (1308 mV): unknown EST cpu, no changes
> possible
> real mem = 535273472 (522728K)
> avail mem = 481415168 (470132K)
> using 4278 buffers containing 26865664 bytes (26236K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(d6) BIOS, date 11/25/05, BIOS32 rev. 0 @
> 0xfd740
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 79%
> apm0: AC on, battery charge high, charging
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xfd6d0/0x930
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #5 is the last bus
> bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1600 0xd1800/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82915PM/GM PCIE" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M300 M22" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
> pci2 at ppb1 bus 2
> bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
> (0x4101): irq 11, address 00:0a:e4:c0:aa:a1
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03
> pci3 at ppb2 bus 3
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
> pci4 at ppb3 bus 4
> cbb0 at pci4 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb3: irq 11
> "Ricoh 5C552 Firewire" rev 0x08 at pci4 dev 0 function 1 not configured
> iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: irq
> 11, address 00:12:f0:b2:53:64
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11,
> ICH6 AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM
> disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <HTS424040M9AT00>
> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4080N, 0X21> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11
> iic0 at ichiic0
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> lpt2 at isa0 port 0x3bc/4: polled
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask effd netmask effd ttymask ffff
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> uhub5 at uhub4 port 1
> uhub5: IBM product 0x4482, rev 2.00/0.00, addr 2
> uhub5: 4 ports with 4 removable, self powered, multiple transaction
> translators
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> iwi0: fatal error
> iwi0: device configuration failed
> iwi0: fatal error
> iwi0: device configuration failed
>
>
> --
> Thordur I. Bjornsson
> Humppa!
Most odd. Im using iwi driver on my thinkpad r50e, and it works great but
you only get 1 chance to configure it. after you run dhclient, if it fails,
you have to reboot and try again.
I send this email using the iwi driver!
Regards
Edd
