On Sun, Nov 12, 2017 at 01:28:39PM -0500, Nick Holland wrote:
> Help.
>
> I was upgrading a few very similar machines to -current today.
> ONE of the three decided to be unpleasant. The thing has a
> serial console, and but it is about 370km from me. :-/
>
> Upgrade from Sep 9 current to today's current via bsd.rd, just
> like the other two.
>
> Upon reboot, it does this (from /boot) :
>
> booting hd0a:/bsd: 8484712+2429968+244048+0+667648 [636809heap full
> (0x9d304+65536)
>
> And then reboots the system, as if from power-down/power-up.
> (already something I haven't seen before)
>
> Reboot from "bsd.rd" and "bsd.sp", same results. reboot from "obsd"
> (Sept 9), same results. Not a kernel problem, it seems. About this
> point, I'm starting to think how the serial console has let me down.
>
> I remember how to bring up a DRAC remote CD image via ssh tunnels
> to the drac and how to run java in a windows browser, and
> reboot off the remote CD image, do another upgrade, all goes fine
> (again), but upon reboot, same results... "heap full" and reboot.
>
> Boot from remote CD, at the boot> prompt, enter "boot hd0a:/bsd",
> and it boots Just Fine from the local hard disk (only boot pulled
> from the remote CD). Boot loader! Reinstalled boot:
>
> # installboot -v sd0
> Using / as root
> installing bootstrap on /dev/rsd0c
> using first-stage /usr/mdec/biosboot, second-stage /usr/mdec/boot
> copying /usr/mdec/boot to /boot
> /boot is 3 blocks x 32768 bytes
> fs block shift 3; part offset 64; inode block 24, offset 2088
> master boot record (MBR) at sector 0
> partition 3: type 0xA6 offset 64 size 2000397671
> /usr/mdec/biosboot will be written at sector 64
>
> good, right?
>
> Reboot off local hard disk, boom. problem is still there. maybe
> not the boot loader. :-/
>
> Verified /boot on trouble system and good system are the same.
>
> I'm not going to cry "bug", since there are two nearly identical
> systems working just fine. But I can't think of what I did wrong
> or what to do to fix it.
>
> Suggestions?
You are hitting -DHEAP_LIMIT=0xA0000 in /boot. The code is in libsa/alloa.c
No idea why. But something in that system is different.
You do have one weird line in your disklabel output: a filesystem
mounted on swap?
Can you boot into single user mode?
-Otto
>
> Nick.
>
>
> $ dmesg
> OpenBSD 6.2-current (GENERIC.MP) #203: Sat Nov 11 19:01:19 MST 2017
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 17131339776 (16337MB)
> avail mem = 16605306880 (15836MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6680 (57 entries)
> bios0: vendor Dell Inc. version "2.8.0" date 06/24/2014
> bios0: Dell Inc. PowerEdge R210 II
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S4 S5
> acpi0: tables DSDT FACP SPMI ASF! HPET APIC MCFG BOOT SSDT ASPT SSDT SSDT
> SPCR HEST ERST BERT EINJ
> acpi0: wakeup devices P0P1(S4) GLAN(S0) EHC1(S4) EHC2(S4) XHC_(S4) PXSX(S4)
> RP01(S5) PXSX(S4) RP02(S5) PXSX(S4) RP03(S5) PXSX(S4) RP04(S5) PXSX(S4)
> RP05(S5) PXSX(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz, 3193.24 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> acpihpet0: recalibrated TSC frequency 3192748207 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz, 3192.75 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz, 3192.75 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz, 3192.75 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> cpu4 at mainbus0: apid 4 (application processor)
> cpu4: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz, 3192.75 MHz
> cpu4:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu4: 256KB 64b/line 8-way L2 cache
> cpu4: smt 0, core 2, package 0
> cpu5 at mainbus0: apid 5 (application processor)
> cpu5: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz, 3192.75 MHz
> cpu5:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu5: 256KB 64b/line 8-way L2 cache
> cpu5: smt 1, core 2, package 0
> cpu6 at mainbus0: apid 6 (application processor)
> cpu6: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz, 3192.75 MHz
> cpu6:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu6: 256KB 64b/line 8-way L2 cache
> cpu6: smt 0, core 3, package 0
> cpu7 at mainbus0: apid 7 (application processor)
> cpu7: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz, 3192.75 MHz
> cpu7:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu7: 256KB 64b/line 8-way L2 cache
> cpu7: smt 1, core 3, package 0
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 2 (P0P1)
> acpiprt2 at acpi0: bus 1 (RP01)
> acpiprt3 at acpi0: bus -1 (RP02)
> acpiprt4 at acpi0: bus -1 (RP03)
> acpiprt5 at acpi0: bus -1 (RP04)
> acpiprt6 at acpi0: bus -1 (RP05)
> acpiprt7 at acpi0: bus -1 (RP06)
> acpiprt8 at acpi0: bus -1 (RP07)
> acpiprt9 at acpi0: bus -1 (RP08)
> acpiprt10 at acpi0: bus -1 (PEG0)
> acpiprt11 at acpi0: bus -1 (PEG1)
> acpiprt12 at acpi0: bus -1 (PEG2)
> acpiprt13 at acpi0: bus -1 (PEG3)
> acpicpu0 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu4 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu5 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu6 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu7 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: FN00, resource for FAN0
> acpipwrres1 at acpi0: FN01, resource for FAN1
> acpipwrres2 at acpi0: FN02, resource for FAN2
> acpipwrres3 at acpi0: FN03, resource for FAN3
> acpipwrres4 at acpi0: FN04, resource for FAN4
> acpitz0 at acpi0: critical temperature is 95 degC
> "IPI0001" at acpi0 not configured
> "INT3F0D" at acpi0 not configured
> "PNP0A05" at acpi0 not configured
> "PNP0A05" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> ipmi at mainbus0 not configured
> cpu0: Enhanced SpeedStep 3193 MHz: speeds: 3201, 3200, 3100, 3000, 2900,
> 2700, 2600, 2500, 2400, 2300, 2200, 2100, 1900, 1800, 1700, 1600 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 Host" rev 0x09
> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 20
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
> pci1 at ppb0 bus 1
> bnx0 at pci1 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 0 int 16
> bnx1 at pci1 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 0 int 17
> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
> pci2 at ppb1 bus 2
> 2:3:0: mem address conflict 0xffff0000/0x10000
> vga1 at pci2 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 31 function 0 "Intel C202 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
> ahci0: port 0: 3.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 850, EXM0> SCSI3 0/direct
> fixed naa.50025388400563fe
> sd0: 976762MB, 512 bytes/sector, 2000409264 sectors, thin
> cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD+-RW DS-8A8SH, KD51> ATAPI 5/cdrom
> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 0 int
> 19
> iic0 at ichiic0
> sdtemp0 at iic0 addr 0x18: stts2002
> sdtemp1 at iic0 addr 0x19: mcp98243
> sdtemp2 at iic0 addr 0x1a: mcp98243
> sdtemp3 at iic0 addr 0x1b: stts2002
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> uhidev0 at uhub2 port 1 configuration 1 interface 0 "Avocent USB Composite
> Device-0" rev 1.10/0.00 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev1 at uhub2 port 1 configuration 1 interface 1 "Avocent USB Composite
> Device-0" rev 1.10/0.00 addr 3
> uhidev1: iclass 3/1
> ums0 at uhidev1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> umass0 at uhub2 port 2 configuration 1 interface 0 "Avocent USB Composite
> Device-1" rev 2.00/0.00 addr 4
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <iDRAC, LCDRIVE, 0323> SCSI0 0/direct removable
> umass1 at uhub2 port 2 configuration 1 interface 1 "Avocent USB Composite
> Device-1" rev 2.00/0.00 addr 4
> umass1: using SCSI over Bulk-Only
> scsibus3 at umass1: 2 targets, initiator 0
> cd1 at scsibus3 targ 1 lun 0: <iDRAC, Virtual CD, 0323> SCSI0 5/cdrom
> removable
> sd2 at scsibus3 targ 1 lun 1: <iDRAC, Virtual Floppy, 0323> SCSI0 0/direct
> removable
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> uhub4 at uhub3 port 5 configuration 1 interface 0 "Standard Microsystems
> product 0x2514" rev 2.00/0.00 addr 3
> vscsi0 at root
> scsibus4 at vscsi0: 256 targets
> softraid0 at root
> scsibus5 at softraid0: 256 targets
> root on sd0a (ccde728ba2c9bbe7.a) swap on sd0b dump on sd0b
> bnx0: address d4:ae:52:b9:6a:10
> brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> bnx1: address d4:ae:52:b9:6a:11
> brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
>
> # disklabel sd0
> # /dev/rsd0c:
> type: SCSI
> disk: SCSI disk
> label: Samsung SSD 850
> duid: ccde728ba2c9bbe7
> flags:
> bytes/sector: 512
> sectors/track: 63
> tracks/cylinder: 255
> sectors/cylinder: 16065
> cylinders: 124519
> total sectors: 2000409264
> boundstart: 64
> boundend: 2000397735
> drivedata: 0
>
> 16 partitions:
> # size offset fstype [fsize bsize cpg]
> a: 1028096 64 4.2BSD 4096 32768 1 # /
> b: 41929705 1048578560 swap #
> /repo/anoncvs/tmp
> c: 2000409264 0 unused
> d: 20980864 1090508288 4.2BSD 2048 16384 1 # /usr
> e: 8385920 1111489152 4.2BSD 2048 16384 1 # /tmp
> f: 20964832 1119875072 4.2BSD 2048 16384 1 # /var
> g: 41929664 1161804704 4.2BSD 2048 16384 1 # /repo
> h: 20964800 1140839904 4.2BSD 2048 16384 1 # /home
> i: 16064 1203734368 4.2BSD 2048 16384 1 #
> /repo/anoncvs/dev
> j: 83875360 1203750432 4.2BSD 2048 16384 1
>
> # fdisk sd0
> Disk: sd0 geometry: 124519/255/63 [2000409264 Sectors]
> Offset: 0 Signature: 0xAA55
> Starting Ending LBA Info:
> #: id C H S - C H S [ start: size ]
> -------------------------------------------------------------------------------
> 0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
>
> 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
>
> 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
>
> *3: A6 0 1 2 - 124518 254 63 [ 64: 2000397671 ] OpenBSD
>
