This is current/amd64, dmesg below. Seemingly, one of the six disks
does not come back from resume. The disk is
sd1 at scsibus1 targ 1 lun 0: <ATA, ST1500DL003-9VT1, CC31> SCSI3 0/direct
fixed naa.5000c5002eda7d71
and normally it works just fine. It goes through a complete dd
(in and out) without any error. I use it as my /backup disk.
But once I suspend with zzz, and resume back, the disk no longer works.
The dmesg says:
ahci0: device on port 1 didn't come ready, TFD: 0x80<BSY>
ahci0: stopping the port, softreset slot 31 was still active.
ahci0: unable to communicate with device on port 1
and I can't even ls.
I am not sure it's the suspend/resume, but that't the symptom I see.
Since boot till the first suspend, there is never an error. Is there
such a thing as a disk (or disk controller?) not coming back from suspend?
How can I debug this?
Jan
OpenBSD 6.2-current (GENERIC.MP) #0: Fri Nov 3 08:37:29 CET 2017
h...@box.stare.cz:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8486780928 (8093MB)
avail mem = 8222748672 (7841MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (36 entries)
bios0: vendor Award Software International, Inc. version "F3" date 03/31/2011
bios0: Gigabyte Technology Co., Ltd. H67MA-USB3-B3
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG ASPT SSPT EUDS MATS TAMG APIC SSDT
acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5)
PEX6(S5) PEX7(S5) HUB0(S5) UAR1(S3) USBE(S3) USE2(S3) AZAL(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xf4000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.60 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
acpihpet0: recalibrated TSC frequency 3392296252 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 2, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus 1 (PEX0)
acpiprt4 at acpi0: bus -1 (PEX1)
acpiprt5 at acpi0: bus -1 (PEX2)
acpiprt6 at acpi0: bus -1 (PEX3)
acpiprt7 at acpi0: bus -1 (PEX4)
acpiprt8 at acpi0: bus -1 (PEX5)
acpiprt9 at acpi0: bus 2 (PEX6)
acpiprt10 at acpi0: bus 3 (PEX7)
acpicpu0 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu1 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu2 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu3 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu4 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu5 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu6 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu7 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpibtn0 at acpi0: PWRB
"ICD0001" at acpi0 not configured
"INT3F0D" at acpi0 not configured
cpu0: Enhanced SpeedStep 3492 MHz: speeds: 3701, 3700, 3600, 3500, 3400, 3300,
3200, 3100, 3000, 2900, 2800, 2700, 2600, 2500, 2400, 2300, 2200, 2100, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1680x1050, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi
azalia0: codecs: Realtek/0x0889, Intel/0x2805, using Realtek/0x0889
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb5: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), msi, address 50:e5:49:36:ec:0d
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb2 at pci0 dev 28 function 7 "Intel 6 Series PCIE" rev 0xb5: msi
pci3 at ppb2 bus 3
xhci0 at pci3 dev 0 function 0 "Etron EJ168 xHCI" rev 0x01: msi
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Etron xHCI root hub" rev 3.00/1.00
addr 1
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 "Intel H67 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3
ahci0: device on port 0 didn't come ready, TFD: 0x80<BSY>
ahci0: CLO did not complete
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 6.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
ahci0: port 4: 3.0Gb/s
ahci0: port 5: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSA2M040, 2CV1> SCSI3 0/direct
fixed naa.50015179593bd675
sd0: 38166MB, 512 bytes/sector, 78165360 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, ST1500DL003-9VT1, CC31> SCSI3 0/direct
fixed naa.5000c5002eda7d71
sd1: 1430799MB, 512 bytes/sector, 2930277168 sectors
sd2 at scsibus1 targ 2 lun 0: <ATA, ST1500DL003-9VT1, CC32> SCSI3 0/direct
fixed naa.5000c5002f119d73
sd2: 1430799MB, 512 bytes/sector, 2930277168 sectors
sd3 at scsibus1 targ 3 lun 0: <ATA, SAMSUNG HD105SI, 1AJ1> SCSI3 0/direct fixed
naa.50024e920592fbeb
sd3: 953869MB, 512 bytes/sector, 1953525168 sectors
sd4 at scsibus1 targ 4 lun 0: <ATA, ST1000LM024 HN-M, 2AR1> SCSI3 0/direct
fixed naa.50004cf207132b48
sd4: 953868MB, 512 bytes/sector, 1953523055 sectors
sd5 at scsibus1 targ 5 lun 0: <ATA, ST9320320AS, SD03> SCSI3 0/direct fixed
naa.5000c50013baac5f
sd5: 305245MB, 512 bytes/sector, 625142448 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0x290
uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Genius Optical Mouse" rev
1.10/1.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (c3cac300fd798ecf.a) swap on sd0b dump on sd0b
wsmouse0 detached
ums0 detached
uhidev0 detached
uhub3 detached
uhub0 detached
uhub1 detached
uhub4 detached
uhub2 detached
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
uhub1 at usb1 configuration 1 interface 0 "Etron xHCI root hub" rev 3.00/1.00
addr 1
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ahci0: device on port 1 didn't come ready, TFD: 0x80<BSY>
ahci0: stopping the port, softreset slot 31 was still active.
ahci0: unable to communicate with device on port 1
uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Genius Optical Mouse" rev
1.10/1.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
