Pedro Ramos wrote: > Please find attached the dmesg from ASRock J4205-ITX. > > > Best regards, > Pedro Ramos > > > ["asrock.j4205-itx.dmesg.gz" (application/x-gzip)]
Unfortunatelly I got one of those few weeks ago and it is nothing but the trouble. The first one died but NewEgg sent me the second one. I don't know where to begin. With the default ACPI configuration options 1. Suspend to RAM enabled 2. ACPI HPET Table enabled one can't clearly shut down 6.2 stable. This is what I got www.devio.us/~ppunosevac/kernel-panic-1.jpg The system was frozen to the point that I could not get crash trace. With suspend to RAM and HPET table disabled I could finally do shutdown -p now without crashing kernel. I see that even on 6.2 current dmesg which was sent bunch of errors in dmesg pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x5af0 rev 0x0b inteldrm0 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x5a84 rev 0x0b drm0 at inteldrm0 inteldrm0: msi error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load firmware i915/bxt_dmc_ver1.bin (-22) error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored) Unfortunatelly at this point my system is trashed so I can't post dmesg from of 6.2 stable. Namely after trying to start Chrome I got kernel panic again but I was able this time to trace it www.devio.us/~ppunosevac/kernel-panic-2.jpg Now the system hangs on the boot with the message entry point at 0x1000158 My boot device was RAID 1 and I would appreciate if somebody could give me a suggestion if I can recover the system (I do have the backup for data). Few more things. I could not get X running on my DVI-D 4:3 monitor. However both VGA output and HDMI were working. HDMI had no problem using my high definition Panasonic TV. If you attach HDD to ASMedia ASM1061 SATA ports (there are 2 of those and there are two of SATA3 6.0Gb/s Connectors, support NCQ, AHCI and Hot Plug) S.M.A.R.T. daemon will refuse to start. I have not investigated this further. Sound Realtek ALC892 did work as well as Realtek 8111GR Gigabit LAN. I could not make a use of 1 x PCI Express 2.0 x1 Slot. Note also that M.2 is only for WiFi not for storage device. I am not feeling good about this purchase right now. Maybe somebody could give me some pointers. Best, Predrag
