Hi,
I have Lenovo T440s and Lenovo docking station with an external monitor.
If I have running OpenBSD without docking station and then I plug it to
it, I can't see the external monitor.
I see only these in dmesg after plugging laptop into it:
uhub2 at uhub0 port 12 configuration 1 interface 0 "LENOVO Lenovo ThinkPad
Dock" rev 3.00/50.41 addr 3
uhub3 at uhub0 port 3 configuration 1 interface 0 "LENOVO Lenovo ThinkPad Dock"
rev 2.10/50.40 addr 4
uhub4 at uhub3 port 4 configuration 1 interface 0 "Lenovo Lenovo ThinkPad Dock"
rev 2.00/0.01 addr 8
Any idea what's wrong? IIRC it used to work in the past.
Jiri
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
eDP-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 309mm
x 175mm
1920x1080 60.01*+
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
800x600 60.00 60.32 56.25
700x525 59.98
640x512 60.02
640x480 60.00 59.94
512x384 60.00
400x300 60.32 56.34
320x240 60.05
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-2 disconnected (normal left inverted right x axis y axis)
OpenBSD 6.2 (GENERIC.MP) #115: Wed Sep 27 10:45:53 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 12540866560 (11959MB)
avail mem = 12153778176 (11590MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdcd3d000 (62 entries)
bios0: vendor LENOVO version "GJET79WW (2.29 )" date 09/03/2014
bios0: LENOVO 20ARS19C0B
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP DBGP ECDT HPET APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT
SSDT SSDT PCCT SSDT TCPA UEFI POAT ASF! BATB FPDT UEFI DMAR
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 2694.15 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2694154130 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 2693.77 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 2693.77 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 2693.77 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
acpipwrres1 at acpi0: NVP3, resource for PEG_
acpipwrres2 at acpi0: NVP2, resource for PEG_
acpitz0 at acpi0: critical temperature is 200 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"LEN0071" at acpi0 not configured
"LEN0036" at acpi0 not configured
"SMO1200" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1773" serial 17123 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 model "45N1738" serial 2803 type LION oem "LGC"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2694 MHz: speeds: 2701, 2700, 2600, 2400, 2300, 2100,
2000, 1800, 1700, 1600, 1400, 1300, 1100, 1000, 800, 756 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x04: msi, address
28:d2:44:df:a1:87
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Realtek ALC292
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 2
rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 3
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0x83, msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7TE256, EXT0> SCSI3 0/direct
fixed naa.5002538844584d30
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft Microsoft\M-.
2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Microsoft Microsoft\M-.
2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 2
uhidev1: iclass 3/1, 26 report ids
uhid0 at uhidev1 reportid 18: input=0, output=0, feature=1
uhid1 at uhidev1 reportid 23: input=0, output=0, feature=1
ums0 at uhidev1 reportid 26: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhidev2 at uhub0 port 1 configuration 1 interface 2 "Microsoft Microsoft\M-.
2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 2
uhidev2: iclass 3/0, 39 report ids
uhid2 at uhidev2 reportid 3: input=1, output=0, feature=0
uhid3 at uhidev2 reportid 7: input=7, output=0, feature=0
uhid4 at uhidev2 reportid 32: input=0, output=0, feature=18
uhid5 at uhidev2 reportid 33: input=2, output=0, feature=0
uhid6 at uhidev2 reportid 34: input=0, output=0, feature=26
uhid7 at uhidev2 reportid 35: input=0, output=0, feature=26
uhid8 at uhidev2 reportid 36: input=0, output=0, feature=31
uhid9 at uhidev2 reportid 37: input=0, output=0, feature=31
uhid10 at uhidev2 reportid 38: input=0, output=0, feature=31
uhid11 at uhidev2 reportid 39: input=31, output=0, feature=0
ugen0 at uhub0 port 6 "Validity Sensors VFS5011 Fingerprint Reader" rev
1.10/0.78 addr 3
ugen1 at uhub0 port 7 "Intel product 0x07dc" rev 2.00/0.01 addr 4
uvideo0 at uhub0 port 8 configuration 1 interface 0 "J30E9S6RZ Integrated
Camera" rev 2.00/10.04 addr 5
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 89999MB, 512 bytes/sector, 184319472 sectors
root on sd1a (a55d8c4b62cc0bec.a) swap on sd1b dump on sd1b
iwm0: hw rev 0x140, fw ver 16.242414.0, address e8:b1:fc:95:ee:df
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
uhid0 detached
uhid1 detached
wsmouse2 detached
ums0 detached
uhidev1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhid5 detached
uhid6 detached
uhid7 detached
uhid8 detached
uhid9 detached
uhid10 detached
uhid11 detached
uhidev2 detached
ugen0 detached
ugen1 detached
video0 detached
uvideo0 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft Microsoft\M-.
2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
error: [drm:pid25632:intel_dp_link_training_clock_recovery] *ERROR* failed to
enable link training
error: [drm:pid25632:intel_dp_link_training_channel_equalization] *ERROR*
failed to start channel equalization
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Microsoft Microsoft\M-.
2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 2
uhidev1: iclass 3/1, 26 report ids
uhid0 at uhidev1 reportid 18: input=0, output=0, feature=1
uhid1 at uhidev1 reportid 23: input=0, output=0, feature=1
ums0 at uhidev1 reportid 26: 5 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhidev2 at uhub0 port 1 configuration 1 interface 2 "Microsoft Microsoft\M-.
2.4GHz Transceiver v9.0" rev 2.00/7.97 addr 2
uhidev2: iclass 3/0, 39 report ids
uhid2 at uhidev2 reportid 3: input=1, output=0, feature=0
uhid3 at uhidev2 reportid 7: input=7, output=0, feature=0
uhid4 at uhidev2 reportid 32: input=0, output=0, feature=18
uhid5 at uhidev2 reportid 33: input=2, output=0, feature=0
uhid6 at uhidev2 reportid 34: input=0, output=0, feature=26
uhid7 at uhidev2 reportid 35: input=0, output=0, feature=26
uhid8 at uhidev2 reportid 36: input=0, output=0, feature=31
uhid9 at uhidev2 reportid 37: input=0, output=0, feature=31
uhid10 at uhidev2 reportid 38: input=0, output=0, feature=31
uhid11 at uhidev2 reportid 39: input=31, output=0, feature=0
error: [drm:pid17769:intel_dp_link_training_clock_recovery] *ERROR* failed to
enable link training
error: [drm:pid17769:intel_dp_link_training_channel_equalization] *ERROR*
failed to start channel equalization
uhub2 at uhub0 port 3 configuration 1 interface 0 "LENOVO Lenovo ThinkPad Dock"
rev 2.10/50.40 addr 3
uhub3 at uhub2 port 4 configuration 1 interface 0 "Lenovo Lenovo ThinkPad Dock"
rev 2.00/0.01 addr 4
ugen0 at uhub0 port 6 "Validity Sensors VFS5011 Fingerprint Reader" rev
1.10/0.78 addr 5
ugen1 at uhub0 port 7 "Intel product 0x07dc" rev 2.00/0.01 addr 6
uvideo0 at uhub0 port 8 configuration 1 interface 0 "J30E9S6RZ Integrated
Camera" rev 2.00/10.04 addr 7
video0 at uvideo0
uhub4 at uhub0 port 12 configuration 1 interface 0 "LENOVO Lenovo ThinkPad
Dock" rev 3.00/50.41 addr 8
uhub5 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.04 addr 2
uhub3 detached
uhub2 detached
uhub4 detached
uhub2 at uhub0 port 12 configuration 1 interface 0 "LENOVO Lenovo ThinkPad
Dock" rev 3.00/50.41 addr 3
uhub3 at uhub0 port 3 configuration 1 interface 0 "LENOVO Lenovo ThinkPad Dock"
rev 2.10/50.40 addr 4
uhub4 at uhub3 port 4 configuration 1 interface 0 "Lenovo Lenovo ThinkPad Dock"
rev 2.00/0.01 addr 8
uhub4 detached
uhub3 detached
uhub2 detached
uhub2 at uhub0 port 12 configuration 1 interface 0 "LENOVO Lenovo ThinkPad
Dock" rev 3.00/50.41 addr 3
uhub3 at uhub0 port 3 configuration 1 interface 0 "LENOVO Lenovo ThinkPad Dock"
rev 2.10/50.40 addr 4
uhub4 at uhub3 port 4 configuration 1 interface 0 "Lenovo Lenovo ThinkPad Dock"
rev 2.00/0.01 addr 8
