https://beagleboard.org/x15
<https://beagleboard.org/static/images/BeagleBoard-X15.png> What is BeagleBoard-X15? BeagleBoard-X15 is the top performing, mainline Linux enabled, power-users’ dream board with a core tailored for every computing task and a highspeed interface for every connectivity need. Give your algorithms room to stretch! Processor: TI AM5728 2×1.5-GHz ARM® Cortex-A15 <http://www.ti.com/product/am5728> - 2GB DDR3 RAM - 4GB 8-bit eMMC on-board flash storage - 2D/3D graphics and video accelerators (GPUs) - 2×700-MHz C66 digital signal processors (DSPs) - 2×ARM Cortex-M4 microcontrollers (MCUs) - 4×32-bit programmable real-time units (PRUs) Connectivity - 2×Gigabit Ethernet - 3×SuperSpeed USB 3.0 host - HighSpeed USB 2.0 client - eSATA (500mA) - full-size HDMI video output - microSD card slot - Stereo audio in and out - 4×60-pin headers with PCIe, LCD, mSATA - and much more... <http://elinux.org/Beagleboard:BeagleBoard-X15> See quick start guide <https://beagleboard.org/x15-quick> On Tue, Sep 19, 2017 at 10:14 PM, Greg Garrison <i...@nuemak.com> wrote: > Hello, > > > I am interested how well the ARM platform is supported. Does anyone know > of a low cost dual ethernet arm board that I could use to build an OpenBSD > based router / gateway device? I'd be interested in hearing experiences > from the community. I don't care so much about wifi capability I just want > a very cheap board with two lan ports. Wifi would be an added bonus but > not necessary for what I have in mind. > > > Thanks, > > Greg > >
