On Sep 12 19:29:16, h...@stare.cz wrote:
> This is current/i386 from https://ftp.eu.openbsd.org/pub/OpenBSD
> The upgrade went just fine as always, but the installed /bsd
> just goes to a black screen at some point during the boot sequence;
> the machine does not answer to a ping.
>
> Here is a previous dmesg on the same machine:
> http://stare.cz/dmesg/intel-i7.20170827
And here is a dmesg of the currnt /bsd.rd which boot fine:
OpenBSD 6.2-beta (RAMDISK_CD) #125: Mon Sep 11 11:23:18 MDT 2017
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz ("GenuineIntel" 686-class) 3.50
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,LAHF,PERF,ITSC,SENSOR,ARAT
real mem = 3673346048 (3503MB)
avail mem = 3593797632 (3427MB)
mainbus0 at root
bios0 at mainbus0: date 03/31/11, BIOS32 rev. 0 @ 0xfa960, SMBIOS rev. 2.4 @
0xf0100 (36 entries)
bios0: vendor Award Software International, Inc. version "F3" date 03/31/2011
bios0: Gigabyte Technology Co., Ltd. H67MA-USB3-B3
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP HPET MCFG ASPT SSPT EUDS MATS TAMG APIC SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus 1 (PEX0)
acpiprt4 at acpi0: bus -1 (PEX1)
acpiprt5 at acpi0: bus -1 (PEX2)
acpiprt6 at acpi0: bus -1 (PEX3)
acpiprt7 at acpi0: bus -1 (PEX4)
acpiprt8 at acpi0: bus -1 (PEX5)
acpiprt9 at acpi0: bus 2 (PEX6)
acpiprt10 at acpi0: bus 3 (PEX7)
acpicpu at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"ICD0001" at acpi0 not configured
"INT3F0D" at acpi0 not configured
bios0: ROM list: 0xc0000/0xd800 0xce000/0x2a00! 0xd1000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
"Intel 6 Series HD Audio" rev 0x05 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 16
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 18
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), msi, address 50:e5:49:36:ec:0d
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb2 at pci0 dev 28 function 7 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 19
pci3 at ppb2 bus 3
xhci0 at pci3 dev 0 function 0 "Etron EJ168 xHCI" rev 0x01: msi
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Etron xHCI root hub" rev 3.00/1.00
addr 1
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 "Intel H67 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3
ahci0: device on port 0 didn't come ready, TFD: 0x80<BSY>
ahci0: CLO did not complete
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 6.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
ahci0: port 4: 3.0Gb/s
ahci0: port 5: 3.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, INTEL SSDSA2M040, 2CV1> SCSI3 0/direct
fixed naa.50015179593bd675
sd0: 38166MB, 512 bytes/sector, 78165360 sectors, thin
sd1 at scsibus0 targ 1 lun 0: <ATA, ST1500DL003-9VT1, CC31> SCSI3 0/direct
fixed naa.5000c5002eda7d71
sd1: 1430799MB, 512 bytes/sector, 2930277168 sectors
sd2 at scsibus0 targ 2 lun 0: <ATA, ST1500DL003-9VT1, CC32> SCSI3 0/direct
fixed naa.5000c5002f119d73
sd2: 1430799MB, 512 bytes/sector, 2930277168 sectors
sd3 at scsibus0 targ 3 lun 0: <ATA, SAMSUNG HD105SI, 1AJ1> SCSI3 0/direct fixed
naa.50024e920592fbeb
sd3: 953869MB, 512 bytes/sector, 1953525168 sectors
sd4 at scsibus0 targ 4 lun 0: <ATA, ST1000LM024 HN-M, 2AR1> SCSI3 0/direct
fixed naa.50004cf207132b48
sd4: 953868MB, 512 bytes/sector, 1953523055 sectors
sd5 at scsibus0 targ 5 lun 0: <ATA, ST9320320AS, SD03> SCSI3 0/direct fixed
naa.5000c50013baac5f
sd5: 305245MB, 512 bytes/sector, 625142448 sectors
"Intel 6 Series SMBus" rev 0x05 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhub3 at uhub0 port 1 configuration 1 interface 0 "vendor 0x8087 product
0x0024" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Genius Optical Mouse" rev
1.10/1.00 addr 3
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhub4 at uhub2 port 1 configuration 1 interface 0 "vendor 0x8087 product
0x0024" rev 2.00/0.00 addr 2
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
umass0 at uhub4 port 2 configuration 1 interface 0 "Kingston DT 100 G2" rev
2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd6 at scsibus2 targ 1 lun 0: <Kingston, DT 100 G2, PMAP> SCSI0 0/direct
removable serial.09511653BB50D5700002
sd6: 3818MB, 512 bytes/sector, 7819264 sectors
