Hi... Are you sure than AWS provide dhcpv6? or slaac?
Le 09/05/17 à 11:45, Zbyszek Żółkiewski a écrit : > Thanks, but it also do not work: > > cat /etc/hostname.xnf0 > > > > dhcp > inet6 autoconf > > ksh /etc/netstart > DHCPREQUEST on xnf0 to 255.255.255.255 > DHCPACK from 172.30.0.1 (06:21:2f:5e:51:4d) > bound to 172.30.0.120 -- renewal in 1800 seconds. > > ifconfig xnf0 > xnf0: flags=208843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF6> mtu 1500 > lladdr 06:e2:3b:b3:f6:52 > index 1 priority 0 llprio 3 > groups: egress > media: Ethernet manual > status: active > inet6 fe80::4e2:3bff:feb3:f652%xnf0 prefixlen 64 scopeid 0x1 > inet 172.30.0.120 netmask 0xffffff00 broadcast 172.30.0.255 > > as you can see only fe80 is there... > > _ > Zbyszek Żółkiewski > >> Wiadomość napisana przez Janne Johansson <icepic...@gmail.com> w dniu >> 05.09.2017, o godz. 11:30: >> >> That is not DHCPv6 but SLAAC. Perhaps that is why you get confused by people >> saying openbsd doesn't have dhcpv6 in base. >> >> https://en.wikipedia.org/wiki/IPv6#Stateless_address_autoconfiguration_.28SLAAC.29 >> >> 2017-09-05 11:27 GMT+02:00 Zbyszek Żółkiewski <zbys...@onefellow.com>: >> AWS uses DHCP, so i need DHCP to configure it, when i do manually: >> >> ifconfig xnf0 inet6 2a05:d018:501:3802:82b7:5ec2:6403:992b/64 autoconf up >> >> then: >> >> # ping6 google.com >> PING google.com (2a00:1450:400b:c03::66): 56 data bytes >> 64 bytes from 2a00:1450:400b:c03::66: icmp_seq=0 hlim=49 time=1.148 ms >> 64 bytes from 2a00:1450:400b:c03::66: icmp_seq=1 hlim=49 time=1.219 ms >> >> any other place to look for possible misconfiguration of DHCP? >> >> _ >> Zbyszek Żółkiewski >> >>> Wiadomość napisana przez Stephane HUC PengouinBSD <b...@stephane-huc.net> w >>> dniu 05.09.2017, o godz. 11:20: >>> >>> Hi... >>> Perhaps, It is possible that I did not understand the question! >>> >>> But : >>> - for OpenBSD 6.1, use 'ipv6 autoconf' into your iface file >>> - for oldiers OpenBSD, use 'rtsol'. >>> >>> >>> Le 09/05/17 à 11:12, Zbyszek Żółkiewski a écrit : >>>>> >>>>> Wiadomość napisana przez Peter Hessler <phess...@theapt.org> w dniu >>>>> 05.09.2017, o godz. 11:05: >>>>> >>>>> OpenBSD's dhclient is IPv4 only. We do not have an IPv6 DHCP client in >>>>> base. >>>> >>>> how does it works then on vultr for example where in same setup IPv6 is >>>> leased from DHCP? I do not see any other daemons running there... >>>> >>>> _ >>>> Zbyszek Żółkiewski >>>> >>> >>> -- >>> ~ " Fully Basic System Distinguish Life! " ~ " Libre as a BSD " +=<<< >>> ---- >>> <me>Stephane HUC as PengouinBSD or CIOTBSD</me> >>> <mail>b...@stephane-huc.net</mail> >>> >> >> >> >> >> -- >> May the most significant bit of your life be positive. > -- ~ " Fully Basic System Distinguish Life! " ~ " Libre as a BSD " +=<<< ---- <me>Stephane HUC as PengouinBSD or CIOTBSD</me> <mail>b...@stephane-huc.net</mail>
signature.asc
Description: OpenPGP digital signature
