Hi - I'm trying to connect my Lenovo Laptop a monitor via HDMI but I'm
getting no output (below I'm including messages regarding xrandr, dmesg,
and Xorg.0.log).
Any pointing to the right direction would be much appreciated.
Kind regards,
Michel.
$ uname -a
OpenBSD S400 6.1 GENERIC.MP#115 amd64
$ dmesg
OpenBSD 6.1-current (GENERIC.MP) #96: Thu Jul 13 19:31:55 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4140773376 (3948MB)
avail mem = 4009488384 (3823MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (61 entries)
bios0: vendor LENOVO version "6DCN92WW(V8.06)" date 02/21/2013
bios0: LENOVO VIUS3
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP
FPDT MSDM SSDT SSDT DMAR
acpi0: wakeup devices P0P1(S0) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S3)
PXSX(S3) PXSX(S3) PXSX(S3) PXSX(S3) RP05(S0) PXSX(S3) RP06(S0) PXSX(S3)
RP07(S0) PXSX(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.40 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 1696402120 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.14 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.14 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.14 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0
acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 127 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"IDEA0100" at acpi0 not configured
"SYN2B04" at acpi0 not configured
"VPC2004" at acpi0 not configured
"AOA2011" at acpi0 not configured
acpibat0 at acpi0: BAT1 model "PABAS0241231" serial 41167 type Li-Ion oem
"LENOVO "
acpiac0 at acpi0: AC unit online
acpibtn1 at acpi0: LID0
"INT340E" at acpi0 not configured
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: GFX0
acpivout0 at acpivideo2: DD02
cpu0: Enhanced SpeedStep 1696 MHz: speeds: 1701, 1700, 1600, 1500, 1400,
1300, 1200, 1100, 1000, 900, 800, 782 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
ehci0: timed out waiting for BIOS
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080),
msi, address 20:89:84:45:d7:96
rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23
ehci1: timed out waiting for BIOS
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI
1.3
ahci0: port 1: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0> SCSI3 0/direct
fixed naa.50014ee6adcc4026
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0
int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch
fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
urtw0 at uhub3 port 2 configuration 1 interface 0 "Realtek RTL8187B" rev
2.00/2.00 addr 3
urtw0: RTL8187B rev E, address 00:08:54:8d:f3:b1
ugen0 at uhub3 port 3 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4
uvideo0 at uhub3 port 4 configuration 1 interface 0 "Vimicro Corp. Lenovo
EasyCamera" rev 2.00/12.06 addr 5
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (70c53ab2024e9707.a) swap on sd0b dump on sd0b
uid 0 on /usr: file system full
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
syncing disks... done
rebooting...
OpenBSD 6.1-current (GENERIC.MP) #96: Thu Jul 13 19:31:55 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4140773376 (3948MB)
avail mem = 4009488384 (3823MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (61 entries)
bios0: vendor LENOVO version "6DCN92WW(V8.06)" date 02/21/2013
bios0: LENOVO VIUS3
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP
FPDT MSDM SSDT SSDT DMAR
acpi0: wakeup devices P0P1(S0) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S3)
PXSX(S3) PXSX(S3) PXSX(S3) PXSX(S3) RP05(S0) PXSX(S3) RP06(S0) PXSX(S3)
RP07(S0) PXSX(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.40 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 1696398130 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0
acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 127 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"IDEA0100" at acpi0 not configured
"SYN2B04" at acpi0 not configured
"VPC2004" at acpi0 not configured
"AOA2011" at acpi0 not configured
acpibat0 at acpi0: BAT1 model "PABAS0241231" serial 41167 type Li-Ion oem
"LENOVO "
acpiac0 at acpi0: AC unit online
acpibtn1 at acpi0: LID0
"INT340E" at acpi0 not configured
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: GFX0
acpivout0 at acpivideo2: DD02
cpu0: Enhanced SpeedStep 1696 MHz: speeds: 1701, 1700, 1600, 1500, 1400,
1300, 1200, 1100, 1000, 900, 800, 782 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
ehci0: timed out waiting for BIOS
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080),
msi, address 20:89:84:45:d7:96
rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23
ehci1: timed out waiting for BIOS
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI
1.3
ahci0: port 1: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0> SCSI3 0/direct
fixed naa.50014ee6adcc4026
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0
int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch
fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
urtw0 at uhub3 port 2 configuration 1 interface 0 "Realtek RTL8187B" rev
2.00/2.00 addr 3
urtw0: RTL8187B rev E, address 00:08:54:8d:f3:b1
ugen0 at uhub3 port 3 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4
uvideo0 at uhub3 port 4 configuration 1 interface 0 "Vimicro Corp. Lenovo
EasyCamera" rev 2.00/12.06 addr 5
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (70c53ab2024e9707.a) swap on sd0b dump on sd0b
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
syncing disks... done
rebooti
OpenBSD 6.1-current (GENERIC.MP) #96: Thu Jul 13 19:31:55 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4140773376 (3948MB)
avail mem = 4009488384 (3823MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (61 entries)
bios0: vendor LENOVO version "6DCN92WW(V8.06)" date 02/21/2013
bios0: LENOVO VIUS3
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP
FPDT MSDM SSDT SSDT DMAR
acpi0: wakeup devices P0P1(S0) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S3)
PXSX(S3) PXSX(S3) PXSX(S3) PXSX(S3) RP05(S0) PXSX(S3) RP06(S0) PXSX(S3)
RP07(S0) PXSX(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.41 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 1696408410 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0
acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 127 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"IDEA0100" at acpi0 not configured
"SYN2B04" at acpi0 not configured
"VPC2004" at acpi0 not configured
"AOA2011" at acpi0 not configured
acpibat0 at acpi0: BAT1 model "PABAS0241231" serial 41167 type Li-Ion oem
"LENOVO "
acpiac0 at acpi0: AC unit online
acpibtn1 at acpi0: LID0
"INT340E" at acpi0 not configured
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: GFX0
acpivout0 at acpivideo2: DD02
cpu0: Enhanced SpeedStep 1696 MHz: speeds: 1701, 1700, 1600, 1500, 1400,
1300, 1200, 1100, 1000, 900, 800, 782 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
ehci0: timed out waiting for BIOS
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080),
msi, address 20:89:84:45:d7:96
rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23
ehci1: timed out waiting for BIOS
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI
1.3
ahci0: port 1: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0> SCSI3 0/direct
fixed naa.50014ee6adcc4026
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0
int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch
fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
urtw0 at uhub3 port 2 configuration 1 interface 0 "Realtek RTL8187B" rev
2.00/2.00 addr 3
urtw0: RTL8187B rev E, address 00:08:54:8d:f3:b1
ugen0 at uhub3 port 3 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4
uvideo0 at uhub3 port 4 configuration 1 interface 0 "Vimicro Corp. Lenovo
EasyCamera" rev 2.00/12.06 addr 5
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (70c53ab2024e9707.a) swap on sd0b dump on sd0b
uid 0 on /usr: file system full
syncing disks... done
rebooting...
OpenBSD 6.1-current (RAMDISK_CD) #106: Sat Jul 22 10:02:15 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4140773376 (3948MB)
avail mem = 4011528192 (3825MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (61 entries)
bios0: vendor LENOVO version "6DCN92WW(V8.06)" date 02/21/2013
bios0: LENOVO VIUS3
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP
FPDT MSDM SSDT SSDT DMAR
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.44 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 1696435740 Hz
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
"INT3F0D" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"IDEA0100" at acpi0 not configured
"SYN2B04" at acpi0 not configured
"VPC2004" at acpi0 not configured
"AOA2011" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"INT340E" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
ehci0: timed out waiting for BIOS
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
"Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080),
msi, address 20:89:84:45:d7:96
rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23
ehci1: timed out waiting for BIOS
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
"Intel HM77 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI
1.3
ahci0: port 1: 3.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0> SCSI3 0/direct
fixed naa.50014ee6adcc4026
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
"Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhub3 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087 product
0x0024" rev 2.00/0.00 addr 2
urtw0 at uhub3 port 2 configuration 1 interface 0 "vendor 0x0bda
RTL8187B_WLAN_Adapter" rev 2.00/2.00 addr 3
urtw0: RTL8187B rev E, address 00:08:54:8d:f3:b1
"Generic USB2.0-CRW" rev 2.00/39.60 addr 4 at uhub3 port 3 not configured
"Vimicro Corp. Lenovo EasyCamera" rev 2.00/12.06 addr 5 at uhub3 port 4 not
configured
uhub4 at uhub2 port 1 configuration 1 interface 0 "vendor 0x8087 product
0x0024" rev 2.00/0.00 addr 2
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uid 0 on /mnt/usr: file system full
uid 0 on /mnt/usr: file system full
uid 0 on /mnt/usr: file system full
uid 0 on /mnt/usr: file system full
uid 0 on /mnt/usr: file system full
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
syncing disks...
OpenBSD 6.1-current (GENERIC.MP) #115: Sat Jul 22 09:58:21 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4140773376 (3948MB)
avail mem = 4009488384 (3823MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (61 entries)
bios0: vendor LENOVO version "6DCN92WW(V8.06)" date 02/21/2013
bios0: LENOVO VIUS3
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP
FPDT MSDM SSDT SSDT DMAR
acpi0: wakeup devices P0P1(S0) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S3)
PXSX(S3) PXSX(S3) PXSX(S3) PXSX(S3) RP05(S0) PXSX(S3) RP06(S0) PXSX(S3)
RP07(S0) PXSX(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.40 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 1696398340 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz, 1696.15 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0
acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 127 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"IDEA0100" at acpi0 not configured
"SYN2B04" at acpi0 not configured
"VPC2004" at acpi0 not configured
"AOA2011" at acpi0 not configured
acpibat0 at acpi0: BAT1 model "PABAS0241231" serial 41167 type Li-Ion oem
"LENOVO "
acpiac0 at acpi0: AC unit online
acpibtn1 at acpi0: LID0
"INT340E" at acpi0 not configured
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: GFX0
acpivout0 at acpivideo2: DD02
cpu0: Enhanced SpeedStep 1696 MHz: speeds: 1701, 1700, 1600, 1500, 1400,
1300, 1200, 1100, 1000, 900, 800, 782 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
ehci0: timed out waiting for BIOS
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080),
msi, address 20:89:84:45:d7:96
rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23
ehci1: timed out waiting for BIOS
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI
1.3
ahci0: port 1: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0> SCSI3 0/direct
fixed naa.50014ee6adcc4026
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0
int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x840300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch
fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
urtw0 at uhub3 port 2 configuration 1 interface 0 "Realtek RTL8187B" rev
2.00/2.00 addr 3
urtw0: RTL8187B rev E, address 00:08:54:8d:f3:b1
ugen0 at uhub3 port 3 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4
uvideo0 at uhub3 port 4 configuration 1 interface 0 "Vimicro Corp. Lenovo
EasyCamera" rev 2.00/12.06 addr 5
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (70c53ab2024e9707.a) swap on sd0b dump on sd0b
$ cat /va
$ cat
/var/
$ cat /var/ lo
log/ lost+found/
$ cat /var/lo g/X
$ cat
/var/log/Xorg.0.log
$ cat /var/log/Xorg.0.log
[ 45.293] (--) checkDevMem: using aperture driver /dev/xf86
[ 45.313] (--) Using wscons driver on /dev/ttyC4
[ 45.371]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 45.371] X Protocol Version 11, Revision 0
[ 45.371] Build Operating System: OpenBSD 6.1 amd64
[ 45.371] Current Operating System: OpenBSD S400 6.1 GENERIC.MP#115 amd64
[ 45.372] Build Date: 22 July 2017 10:13:35AM
[ 45.372]
[ 45.372] Current version of pixman: 0.34.0
[ 45.372] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 45.372] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 45.372] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 22
18:02:56 2017
[ 45.393] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 45.425] (==) No Layout section. Using the first Screen section.
[ 45.436] (==) No screen section available. Using defaults.
[ 45.436] (**) |-->Screen "Default Screen Section" (0)
[ 45.436] (**) | |-->Monitor "<default monitor>"
[ 45.461] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 45.461] (==) Disabling SIGIO handlers for input devices
[ 45.484] (==) Automatically adding devices
[ 45.484] (==) Automatically enabling devices
[ 45.484] (==) Not automatically adding GPU devices
[ 45.500] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 45.500] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 45.500] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 45.500] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 45.525] (II) Loader magic: 0x1cfd24533020
[ 45.525] (II) Module ABI versions:
[ 45.525] X.Org ANSI C Emulation: 0.4
[ 45.525] X.Org Video Driver: 20.0
[ 45.525] X.Org XInput driver : 22.1
[ 45.525] X.Org Server Extension : 9.0
[ 45.570] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3977 rev 9, Mem @
0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
[ 45.570] (II) LoadModule: "glx"
[ 45.573] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 46.053] (II) Module glx: vendor="X.Org Foundation"
[ 46.053] compiled for 1.18.4, module version = 1.0.0
[ 46.053] ABI class: X.Org Server Extension, version 9.0
[ 46.053] (==) AIGLX enabled
[ 46.057] (==) Matched modesetting as autoconfigured driver 0
[ 46.057] (==) Matched vesa as autoconfigured driver 1
[ 46.057] (==) Assigned the driver to the xf86ConfigLayout
[ 46.057] (II) LoadModule: "modesetting"
[ 46.058] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so
[ 46.059] (II) Module modesetting: vendor="X.Org Foundation"
[ 46.059] compiled for 1.18.4, module version = 1.18.4
[ 46.059] Module class: X.Org Video Driver
[ 46.059] ABI class: X.Org Video Driver, version 20.0
[ 46.059] (II) LoadModule: "vesa"
[ 46.060] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 46.083] (II) Module vesa: vendor="X.Org Foundation"
[ 46.083] compiled for 1.18.4, module version = 2.3.4
[ 46.083] Module class: X.Org Video Driver
[ 46.083] ABI class: X.Org Video Driver, version 20.0
[ 46.084] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 46.084] (II) VESA: driver for VESA chipsets: vesa
[ 46.085] (**) modeset(0): claimed PCI slot 0@0:2:0
[ 46.085] (II) modeset(0): using default device
[ 46.085] (WW) Falling back to old probe method for vesa
[ 46.087] (II) modeset(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 46.087] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 46.087] (==) modeset(0): RGB weight 888
[ 46.087] (==) modeset(0): Default visual is TrueColor
[ 46.087] (II) Loading sub module "glamoregl"
[ 46.087] (II) LoadModule: "glamoregl"
[ 46.090] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so
[ 46.167] (II) Module glamoregl: vendor="X.Org Foundation"
[ 46.167] compiled for 1.18.4, module version = 1.0.0
[ 46.167] ABI class: X.Org ANSI C Emulation, version 0.4
[ 46.167] (II) glamor: OpenGL accelerated X.org driver based.
[ 46.519] (II) glamor: EGL version 1.4 (DRI2):
[ 46.645] (II) modeset(0): glamor initialized
[ 46.645] (II) modeset(0): Output LVDS-1 has no monitor section
[ 46.918] (II) modeset(0): Output VGA-1 has no monitor section
[ 46.919] (II) modeset(0): Output HDMI-1 has no monitor section
[ 46.934] (II) modeset(0): Output DP-1 has no monitor section
[ 46.935] (II) modeset(0): EDID for output LVDS-1
[ 46.935] (II) modeset(0): Manufacturer: AUO Model: 233c Serial#: 0
[ 46.935] (II) modeset(0): Year: 2012 Week: 0
[ 46.935] (II) modeset(0): EDID Version: 1.4
[ 46.935] (II) modeset(0): Digital Display Input
[ 46.935] (II) modeset(0): 6 bits per channel
[ 46.935] (II) modeset(0): Digital interface is undefined
[ 46.935] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 46.935] (II) modeset(0): Gamma: 2.20
[ 46.935] (II) modeset(0): No DPMS capabilities specified
[ 46.935] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 46.935] (II) modeset(0): First detailed timing is preferred mode
[ 46.935] (II) modeset(0): Preferred mode is native pixel format and
refresh rate
[ 46.935] (II) modeset(0): redX: 0.580 redY: 0.335 greenX: 0.330
greenY: 0.565
[ 46.935] (II) modeset(0): blueX: 0.155 blueY: 0.140 whiteX: 0.313
whiteY: 0.329
[ 46.935] (II) modeset(0): Manufacturer's mask: 0
[ 46.936] (II) modeset(0): Supported detailed timing:
[ 46.936] (II) modeset(0): clock: 75.0 MHz Image Size: 309 x 173 mm
[ 46.936] (II) modeset(0): h_active: 1366 h_sync: 1404 h_sync_end 1426
h_blank_end 1572 h_border: 0
[ 46.936] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777
v_blanking: 794 v_border: 0
[ 46.936] (II) modeset(0): Unknown vendor-specific block f
[ 46.936] (II) modeset(0): AUO
[ 46.936] (II) modeset(0): B140XTN02.3
[ 46.936] (II) modeset(0): EDID (in hex):
[ 46.936] (II) modeset(0): 00ffffffffffff0006af3c2300000000
[ 46.936] (II) modeset(0): 00160104901f117802bbf59455549027
[ 46.936] (II) modeset(0): 23505400000001010101010101010101
[ 46.936] (II) modeset(0): 0101010101014a1d56ce50001a302616
[ 46.936] (II) modeset(0): 360035ad100000180000000f00000000
[ 46.936] (II) modeset(0): 00000000000000000020000000fe0041
[ 46.936] (II) modeset(0): 554f0a202020202020202020000000fe
[ 46.936] (II) modeset(0): 004231343058544e30322e33200a0089
[ 46.937] (II) modeset(0): Printing probed modes for output LVDS-1
[ 46.937] (II) modeset(0): Modeline "1366x768"x60.1 74.98 1366 1404
1426 1572 768 771 777 794 -hsync -vsync (47.7 kHz eP)
[ 46.937] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100
1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 46.937] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 46.937] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024
1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 46.937] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976
1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 46.937] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960
1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 46.937] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928
1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 46.937] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 46.937] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 46.937] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820
940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 46.937] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720
844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 46.937] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744
900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 46.937] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 46.937] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592
672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 46.937] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484
528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 46.937] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448
512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 46.937] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376
400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 47.213] (II) modeset(0): EDID for output VGA-1
[ 47.214] (II) modeset(0): EDID for output HDMI-1
[ 47.229] (II) modeset(0): EDID for output DP-1
[ 47.229] (II) modeset(0): Output LVDS-1 connected
[ 47.229] (II) modeset(0): Output VGA-1 disconnected
[ 47.229] (II) modeset(0): Output HDMI-1 disconnected
[ 47.229] (II) modeset(0): Output DP-1 disconnected
[ 47.229] (II) modeset(0): Using exact sizes for initial modes
[ 47.229] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[ 47.229] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 47.230] (==) modeset(0): DPI set to (96, 96)
[ 47.230] (II) Loading sub module "fb"
[ 47.230] (II) LoadModule: "fb"
[ 47.232] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 47.280] (II) Module fb: vendor="X.Org Foundation"
[ 47.280] compiled for 1.18.4, module version = 1.0.0
[ 47.280] ABI class: X.Org ANSI C Emulation, version 0.4
[ 47.280] (II) UnloadModule: "vesa"
[ 47.280] (II) Unloading vesa
[ 47.281] (==) Depth 24 pixmap format is 32 bpp
[ 48.080] (==) modeset(0): Backing store enabled
[ 48.080] (==) modeset(0): Silken mouse disabled
[ 48.088] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 48.115] (==) modeset(0): DPMS enabled
[ 48.116] (WW) modeset(0): DRI2: glamor lacks support for pixmap
import/export
[ 48.117] (II) modeset(0): [DRI2] Setup complete
[ 48.117] (II) modeset(0): [DRI2] DRI driver: i965
[ 48.117] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 48.132] (--) RandR disabled
[ 48.197] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 48.197] (II) AIGLX: enabled GLX_ARB_create_context
[ 48.197] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 48.197] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 48.197] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 48.197] (II) AIGLX: enabled GLX_SGI_swap_control and
GLX_MESA_swap_control
[ 48.197] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 48.197] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 48.197] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 48.197] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer
objects
[ 48.197] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 48.198] (II) AIGLX: Loaded and initialized i965
[ 48.198] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 48.213] (II) modeset(0): Damage tracking initialized
[ 48.213] (II) modeset(0): Setting screen physical size to 361 x 203
[ 48.948] (II) config/wscons: checking input device /dev/wskbd
[ 48.948] (II) wskbd: using layout pt
[ 48.948] (II) wskbd: using variant fr
[ 48.948] (II) LoadModule: "kbd"
[ 48.951] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 48.960] (II) Module kbd: vendor="X.Org Foundation"
[ 48.960] compiled for 1.18.4, module version = 1.9.0
[ 48.960] Module class: X.Org XInput Driver
[ 48.960] ABI class: X.Org XInput driver, version 22.1
[ 48.960] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 48.960] (**) /dev/wskbd: always reports core events
[ 48.960] (**) /dev/wskbd: always reports core events
[ 48.960] (**) Option "Protocol" "standard"
[ 48.960] (**) Option "XkbRules" "base"
[ 48.960] (**) Option "XkbModel" "pc105"
[ 48.960] (**) Option "XkbLayout" "pt"
[ 48.960] (**) Option "XkbVariant" "fr"
[ 48.960] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 49.045] (EE) Error loading keymap /tmp/server-0.xkm
[ 49.045] (EE) XKB: Failed to load keymap. Loading default keymap
instead.
[ 49.285] (II) config/wscons: checking input device /dev/wsmouse0
[ 49.285] (**) /dev/wsmouse0: Applying InputClass "touchpad catchall"
[ 49.285] (**) /dev/wsmouse0: Applying InputClass "Default clickpad
buttons"
[ 49.285] (II) LoadModule: "synaptics"
[ 49.288] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[ 49.313] (II) Module synaptics: vendor="X.Org Foundation"
[ 49.313] compiled for 1.18.4, module version = 1.9.0
[ 49.313] Module class: X.Org XInput Driver
[ 49.313] ABI class: X.Org XInput driver, version 22.1
[ 49.313] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[ 49.313] (**) /dev/wsmouse0: always reports core events
[ 49.314] (**) Option "Device" "/dev/wsmouse0"
[ 49.550] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5664
resolution 42
[ 49.550] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4682
resolution 52
[ 49.550] (**) /dev/wsmouse0: always reports core events
[ 49.554] (II) XINPUT: Adding extended input device "/dev/wsmouse0"
(type: TOUCHPAD, id 7)
[ 49.554] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now
constant deceleration 2.5
[ 49.554] (**) synaptics: /dev/wsmouse0: (accel) MaxSpeed is now 1.75
[ 49.554] (**) synaptics: /dev/wsmouse0: (accel) AccelFactor is now 0.038
[ 49.555] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 49.555] (**) /dev/wsmouse0: (accel) acceleration profile 1
[ 49.555] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 49.555] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 49.672] (II) config/wscons: checking input device /dev/wsmouse
[ 49.672] (II) LoadModule: "ws"
[ 49.675] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 49.721] (II) Module ws: vendor="X.Org Foundation"
[ 49.721] compiled for 1.18.4, module version = 1.3.0
[ 49.721] Module class: X.Org XInput Driver
[ 49.721] ABI class: X.Org XInput driver, version 22.1
[ 49.721] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 49.721] (**) /dev/wsmouse: always reports core events
[ 49.722] (II) ws: /dev/wsmouse: debuglevel 0
[ 49.722] (**) Option "Device" "/dev/wsmouse"
[ 49.722] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 49.722] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 49.722] (**) ws: /dev/wsmouse: associated screen: 0
[ 49.722] (II) ws: /dev/wsmouse: minimum x position: 0
[ 49.722] (II) ws: /dev/wsmouse: maximum x position: 1365
[ 49.722] (II) ws: /dev/wsmouse: minimum y position: 0
[ 49.722] (II) ws: /dev/wsmouse: maximum y position: 767
[ 49.722] (==) ws: /dev/wsmouse: Buttons: 7
[ 49.723] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 49.723] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 8)
[ 49.723] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 49.723] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 49.723] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 49.723] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 116.255] (II) modeset(0): EDID vendor "AUO", prod id 9020
[ 116.255] (II) modeset(0): Printing DDC gathered Modelines:
[ 116.256] (II) modeset(0): Modeline "1366x768"x0.0 74.98 1366 1404
1426 1572 768 771 777 794 -hsync -vsync (47.7 kHz eP)
[ 1050.088] (II) modeset(0): EDID vendor "AUO", prod id 9020
[ 1050.088] (II) modeset(0): Printing DDC gathered Modelines:
[ 1050.088] (II) modeset(0): Modeline "1366x768"x0.0 74.98 1366 1404
1426 1572 768 771 777 794 -hsync -vsync (47.7 kHz eP)
$ exit
Script done on Sat Jul 22 18:59:15 2017
Script started on Sat Jul 22 19:03:59 2017
$ xra
$
xrandr
$ xrandr -q
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS-1 connected 1366x768+0+0 (normal left inverted right x axis y axis)
309mm x 173mm
1366x768 60.07*+
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
800x600 60.00 60.32 56.25
700x525 59.98
640x512 60.02
640x480 60.00 59.94
512x384 60.00
400x300 60.32 56.34
320x240 60.05
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
