To bad, that is beyond my knowledge :s Have you tried #fw_update ???????
Manuel > El 22/07/2017, a las 17:13, G <gp...@mailbox.org> escribió: > > Thanks for your replies. > > I get > > # xrandr --query > xrandr: Failed to get size of gamma for output default > Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080 > default connected 1920x1080+0+0 0mm x 0mm > 1920x1080 0.00* > > I don't know if its a problem with skylake since openbsd 6.1 stable > doesn't support it yet. > > > >> On 07/23/17 00:53, Manuel Solis wrote: >> Hello again, >> >> Then you should use xrandr >> >> $xrandr --query >> To know which devices you have >> >> $xrandr --output LVDS1 --auto >> To enable the monitor (LVDS1/VGA1/HDMI1) >> >> $xrandr --output LVDS1 --set BACKLIGHT 50 >> to adjust the backlight >> >> try for instance 50, 99, 05 and see how it goes >> >> >> Manuel >> >>> El 22/07/2017, a las 16:20, G <gp...@mailbox.org> escribió: >>> >>> Thanks for the reply but it doesn't work. >>> >>>> On 07/23/17 00:11, Manuel Solis wrote: >>>> Hello, Mr G >>>> >>>> Try this two: >>>> $xbacklight -set 99 >>>> >>>> $xbacklight -set 50 >>>> >>>> If you see something different then it works!! >>>> >>>> Manuel >>>> >>>>> El 22/07/2017, a las 14:48, G <gp...@mailbox.org> escribió: >>>>> >>>>> Hello. >>>>> I'm trying to adjust my laptop brightness. >>>>> When I'm trying to use xbacklight i get >>>>> >>>>> #xbacklight >>>>> >>>>> No outputs have backlight property >>>>> >>>>> I search around and it seems that xbacklight is broken. I found this email >>>>> https://marc.info/?l=openbsd-bugs&m=149919062727474 >>>>> >>>>> that suggested to use wsconsctl but it doesn't seems to work. Although >>>>> the value of wsconsctl display.brightness changes the screen brightness >>>>> doesn't change. >>>>> >>>>> # wsconsctl >>>>> keyboard.type=pc-xt >>>>> keyboard.bell.pitch=400 >>>>> keyboard.bell.period=100 >>>>> keyboard.bell.volume=50 >>>>> keyboard.bell.pitch.default=400 >>>>> keyboard.bell.period.default=100 >>>>> keyboard.bell.volume.default=50 >>>>> wsconsctl: Use explicit arg to view keyboard.map. >>>>> keyboard.repeat.del1=400 >>>>> keyboard.repeat.deln=100 >>>>> keyboard.repeat.del1.default=400 >>>>> keyboard.repeat.deln.default=100 >>>>> keyboard.ledstate=2 >>>>> keyboard.encoding=us >>>>> mouse.type=synaptics >>>>> mouse.rawmode=0 >>>>> mouse.scale=1472,5670,1408,4794,0,44,76 >>>>> mouse1.type=usb >>>>> mouse1.rawmode=1 >>>>> mouse1.scale=0,0,0,0,0,0,0 >>>>> display.type=vga-pci >>>>> display.emulations=vt100 >>>>> display.screentypes=80x25,80x25bf,80x40,80x40bf,80x50,80x50bf >>>>> display.focus=4 >>>>> display.brightness=100.00% >>>>> display.screen_on=250 >>>>> display.screen_off=0 >>>>> display.vblank=off >>>>> display.kbdact=on >>>>> display.msact=on >>>>> display.outact=on >>>>> # wsconsctl display.brightness=20 >>>>> display.brightness -> 20.00% >>>>> # wsconsctl >>>>> keyboard.type=pc-xt >>>>> keyboard.bell.pitch=400 >>>>> keyboard.bell.period=100 >>>>> keyboard.bell.volume=50 >>>>> keyboard.bell.pitch.default=400 >>>>> keyboard.bell.period.default=100 >>>>> keyboard.bell.volume.default=50 >>>>> wsconsctl: Use explicit arg to view keyboard.map. >>>>> keyboard.repeat.del1=400 >>>>> keyboard.repeat.deln=100 >>>>> keyboard.repeat.del1.default=400 >>>>> keyboard.repeat.deln.default=100 >>>>> keyboard.ledstate=2 >>>>> keyboard.encoding=us >>>>> mouse.type=synaptics >>>>> mouse.rawmode=0 >>>>> mouse.scale=1472,5670,1408,4794,0,44,76 >>>>> mouse1.type=usb >>>>> mouse1.rawmode=1 >>>>> mouse1.scale=0,0,0,0,0,0,0 >>>>> display.type=vga-pci >>>>> display.emulations=vt100 >>>>> display.screentypes=80x25,80x25bf,80x40,80x40bf,80x50,80x50bf >>>>> display.focus=4 >>>>> display.brightness=20.00% >>>>> display.screen_on=250 >>>>> display.screen_off=0 >>>>> display.vblank=off >>>>> display.kbdact=on >>>>> display.msact=on >>>>> display.outact=on >>>>> >>> >
