Good time-of-day,
In playing with vmd, I'm unable to get the guest's ntpd to sync to its
upstream ntp (whether that's the host ntpd or poot.ntp.org). The guest
is losing about 1 second for every 2 that pass. I'm using a recent
snapshot on both host and guest on a 1st gen thinkpad X1 carbon (dmesgs
below).
Host (192.168.1.1) ntpd.conf contains:
servers pool.ntp.org
sensor *
listen on 192.168.1.1
Guest (192.168.1.45) ntpd.conf:
servers pool.ntp.org weight 2
servers 192.168.1.1 weight 5
sensor *
After waiting a couple of minutes for peers and vmmci0 to validate
(should it take that long?), 'ntpctl -s all' returns:
2/2 peers valid, 1/1 sensors valid, clock unsynced, clock offset is
32281.993ms
peer
wt tl st next poll offset delay jitter
192.168.1.1 from pool
5 10 3 17s 30s 31664.409ms 1.342ms 1.093ms
91.148.192.49 from pool pool.ntp.org
2 10 2 24s 33s 32368.088ms 191.773ms 16.310ms
sensor
wt gd st next poll offset correction
vmmci0
1 1 0 9s 15s 98635.552ms 0.000ms
Running 'ntpd -dvs' on the guest, I get an initial correction working
fine, but then rapid lag.
ntp engine ready
sensor vmmci0 added (weight 1, correction 0.000000, refstr 1146241352,
stratum 0)
sensor vmmci0: offset 182.934150
set local clock to Tue Jul 18 20:28:00 AEST 2017 (offset 182.934150s)
reply from 192.168.1.1: offset 103.081636 delay 182.956776, next query 8s
reply from 91.148.192.49: offset 11.955610 delay 0.179250, next query 6s
sensor vmmci0: offset 14.342282
reply from 91.148.192.49: offset 16.811849 delay 0.191814, next query 6s
reply from 192.168.1.1: offset 17.636314 delay 0.000753, next query 6s
reply from 91.148.192.49: offset 21.882577 delay 0.182973, next query 6s
reply from 192.168.1.1: offset 22.651855 delay 0.000650, next query 7s
peer 91.148.192.49 now valid
reply from 91.148.192.49: offset 26.093048 delay 0.193890, next query 7s
sensor vmmci0: offset 26.774802
peer 192.168.1.1 now valid
reply from 192.168.1.1: offset 27.704139 delay 0.000945, next query 7s
reply from 91.148.192.49: offset 31.263042 delay 0.200928, next query 8s
reply from 192.168.1.1: offset 32.950914 delay 0.000978, next query 5s
reply from 192.168.1.1: offset 36.540396 delay 0.002326, next query 8s
reply from 91.148.192.49: offset 37.510453 delay 0.214019, next query 6s
reply from 192.168.1.1: offset 42.784325 delay 0.000786, next query 34s
reply from 91.148.192.49: offset 42.847706 delay 0.194050, next query 30s
sensor vmmci0: offset 39.764442
sensor vmmci0: offset 52.734895
reply from 91.148.192.49: offset 66.757008 delay 0.226063, next query 30s
reply from 192.168.1.1: offset 69.387955 delay 0.000875, next query 31s
adjusting local clock by 22.651855s
sensor vmmci0: offset 43.123480
sensor update vmmci0: offset 23.597814
sensor vmmci0: offset 56.069524
reply from 91.148.192.49: offset 67.973792 delay 0.193812, next query 33s
reply from 192.168.1.1: offset 70.602103 delay 0.001234, next query 31s
I don't know how quickly that 'adjusting local clock by XXX' should take
effect, but running 'date ; sleep 1' in a loop shows no drastic steps.
vm.conf snippet for this vm:
disk "/home/tomr/vms/fresh_snapshot"
memory 1G
interface { switch "local" }
I added the 'memory 1G' line later on - results were the same with the
default of 512M.
Starting up, ntpd initially complained about /var/db/ntpd.drift being
empty, but never wrote to it. I entered a few numbers manually, but they
were never updated.
looking forward to a clue...
tom
dmesg for host:
OpenBSD 6.1-current (GENERIC.MP) #97: Sat Jul 15 12:08:50 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8383655936 (7995MB)
avail mem = 8123781120 (7747MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries)
bios0: vendor LENOVO version "G6ET96WW (2.56 )" date 04/29/2013
bios0: LENOVO 34486T7
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT
ASF! UEFI UEFI MSDM SSDT SSDT DMAR UEFI SSDT DBG2
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3)
EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1796.21 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 1796205600 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1795.92 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1795.92 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1795.92 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpicpu0 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
acpitz0 at acpi0: critical temperature is 200 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"MSFT9000" at acpi0 not configured
"MSFT9001" at acpi0 not configured
"LEN0071" at acpi0 not configured
"LEN0030" at acpi0 not configured
"SMO1200" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1071" serial 9485 type LiP oem "SMP"
acpiac0 at acpi0: AC unit offline
"LEN0078" at acpi0 not configured
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A0" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 1796 MHz: speeds: 1801, 1800, 1700, 1600, 1500,
1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 2
sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x96:
msi, MIMO 2T2R, MoW, address 84:3a:4b:cf:7e:e4
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QS77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SD5SG212, 10.0> SCSI3
0/direct fixed naa.5001b449df708c96
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic
2 int 18
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch
fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
ugen0 at uhub3 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 3
uvideo0 at uhub3 port 6 configuration 1 interface 0 "SunplusIT INC.
Integrated Camera" rev 2.00/14.12 addr 4
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (736d5c9de557645e.a) swap on sd0b dump on sd0b
dmesg for guest:
OpenBSD 6.1-current (GENERIC) #92: Sat Jul 15 12:05:20 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1056948224 (1007MB)
avail mem = 1019179008 (971MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0
acpi at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1796.45 MHz
cpu0:
FPU,VME,DE,PSE,MSR,PAE,MCE,CX8,SEP,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AES,SAVE,AVX,F16C,RDRAND,HV,NXE,LONG,LAHF,FSGSBASE,SMEP,ERMS
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
pvbus0 at mainbus0: OpenBSD
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x00
viornd0 at virtio0
virtio0: irq 3
virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio1
scsibus1 at vioblk0: 2 targets
sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
sd0: 5120MB, 512 bytes/sector, 10485760 sectors
virtio1: irq 5
virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk1 at virtio2
scsibus2 at vioblk1: 2 targets
sd1 at scsibus2 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
sd1: 113MB, 512 bytes/sector, 232519 sectors
virtio2: irq 6
virtio3 at pci0 dev 4 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio3: address fe:e1:bb:d1:f2:94
virtio3: irq 7
virtio4 at pci0 dev 5 function 0 "OpenBSD VMM Control" rev 0x00
vmmci0 at virtio4
virtio4: irq 9
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
com0: console
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (a3e278be1106b0cc.a) swap on sd0b dump on sd0b
