On Sun, Jan 22, 2006 at 09:40:32AM +0100, Joakim Roubert wrote:
> Searching archives for ASUS A7V8X-X, I have found some bug reports from
> 2003-2004, but then nothing. Is anybody using that motherboard with e.g.
> 3.8,
Yes.
and if so, is it working/stable?
Yes, dmesg below.
I only have to config(4) pcibios(4) flags to 0x04, because without
this the system freezes when configuring the audio controller.
Ciao,
Kili
OpenBSD 3.9-beta (GENERIC) #148: Sat Jan 21 19:48:03 CET 2006
[EMAIL PROTECTED]:/var/compile/GENERIC
cpu0: AMD Athlon(TM) XP 2400+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.99
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu0: AMD Powernow: TS
real mem = 1073307648 (1048152K)
avail mem = 972668928 (949872K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(bf) BIOS, date 04/21/04, BIOS32 rev. 0 @ 0xf1aa0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2162
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x6000! 0xd8000/0x1800 0xdc000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8235 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 9200 SE Sec" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon 9200 SE" rev 0x01 at pci1 dev 0 function 1 not configured
bce0 at pci0 dev 9 function 0 "Broadcom BCM4401" rev 0x01: irq 6, address
00:e0:18:9a:2a:7d
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
trm0 at pci0 dev 13 function 0 "Tekram DC-3x5U" rev 0x01: irq 9
scsibus0 at trm0: 8 targets
trm0: target 0 using 8 bit 20.83 MHz, Offset 8 data transfers
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-ROM DVD-303R, 1.10> SCSI2 5/cdrom
removable
trm0: target 2 using 8 bit 10.0 MHz, Offset 15 data transfers
cd1 at scsibus0 targ 2 lun 0: <TEAC, CD-R55S, 1.0J> SCSI2 5/cdrom removable
trm1 at pci0 dev 14 function 0 "Tekram DC-3x5U" rev 0x01: irq 5
scsibus1 at trm1: 16 targets
trm1: target 1 using 16 bit 20.83 MHz, Offset 15 data transfers
st0 at scsibus1 targ 1 lun 0: <HP, C5683A, C104> SCSI2 1/sequential removable
st0: drive empty or not ready
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 5
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
asbtm0 at iic0 addr 0x2d
lm1 at iic0 addr 0x2f: W83791D
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: channel 1 disabled (no drives)
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 6
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auvia0
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ff25 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
umass0 at uhub3 port 3 configuration 1 interface 0
umass0: Genesyslogic USB Mass Storage Device, rev 2.00/0.33, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <SAMSUNG, SV1604N, 0811> SCSI0 0/direct fixed
sd0: 152627MB, 152627 cyl, 64 head, 32 sec, 512 bytes/sec, 312581808 sec total
umass1 at uhub3 port 4 configuration 1 interface 0
umass1: Iomega Optical USB 2.0 Drive, rev 2.00/0.01, addr 3
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets
cd2 at scsibus3 targ 1 lun 0: <LITE-ON, DVDRW SOHW-1633S, BS0C> SCSI0 5/cdrom
removable
uhub4 at uhub0 port 1
uhub4: Chicony Generic USB Hub, rev 1.10/1.00, addr 2
uhub4: 3 ports with 2 removable, bus powered
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: Chicony PFU-65 USB Keyboard, rev 1.10/1.00, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 3 configuration 1 interface 0
uhidev1: Logitech Trackball, rev 1.10/2.20, addr 4, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
udsbr0 at uhub0 port 2
udsbr0: GemTek Corp USB FM Radio, rev 1.00/4.10, addr 5
radio0 at udsbr0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
Software is like wine and lawyers. If it costs more, it must be better. ;)
-- Will H. Backman
