Resending
Hi Misc,
Can We have synproxy state in pf.conf, when net.inet.ip.multipath=1 is set
in /etc/sysctl.conf
here is my config
in /etc/sysctl.conf
net.inet.ip.forwarding=1 # 1=Permit forwarding (routing) of IPv4
packets
#net.inet.ip.mforwarding=1 # 1=Permit forwarding (routing) of IPv4
multicast packets
net.inet.ip.multipath=1 # 1=Enable IP multipath routing
No /etc/mygate file. I have moved it
mv /etc/mygate /etc/mygate.orig
in /etc/hostname.bge0
!route add -mpath default 1.2.3.4
and
in /etc/hostname.bge1
!route add -mpath default 3.4.5.6
rebooted the OpenBSD box.
I have below 2 lines in pf.conf file. first rule works. but 2 nd rule with
synproxy state does NOT?
pass in quick log on $wan_if inet proto tcp from any to $wan_if \
port 22 reply-to ($wan_if $wan_gw)
pass in quick log on $wan_if inet proto tcp from any to $wan_if \
port 22 synproxy state (max-src-conn-rate 1/120) reply-to ($wan_if
$wan_gw)
Why? seeking answers...
--
cat /etc/motd
Thank you
Indunil Jayasooriya
http://www.theravadanet.net/
--
cat /etc/motd
Thank you
Indunil Jayasooriya
http://www.theravadanet.net/
