Hi:
I recently got an x270 at work. It is very nice and I hope to be able
to use OpenBSD on it.
Fortunately, the latest snapshot supports the wireless card via iwm0
(thanks!!!!!).
em0 shows the error about "Unable to initialize the hardware". I guess
this will be fixed in upcoming snapshots (and again, thanks for the
hard work).
However, I am not able to get X to work.
I have created a small partition with linux on it until I can get
OpenBSD to be working with X. It resides in the first part of the
drive, linux grub is managing the starting up. I am using UEFI, but
the bios allows me to also boot on "legacy".
I attach dmesg and also Xorg.0.log and my xorg.conf.
The xorg.conf is not working:
[ 87.907] (II) wsfb(0): using default device
[ 87.907] (EE) wsfb(0): no way to get depth info: Inappropriate
ioctl for device
Unfortunately I am not sure what this means. The same happens if I
boot on legacy.
However, I have noticed that there are no differences in the
resolution of the blue boot screen of OpenBSD when I start on uefi.
When I installed, the resolution was different. Maybe the error is
coming because linux is installed in the first part of the drive?
Should I be using a different driver than wsfb?
thanks
----------- dmesg ---------------
OpenBSD 6.1-current (GENERIC.MP) #113: Fri Jun 9 20:32:02 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8112676864 (7736MB)
avail mem = 7861014528 (7496MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xbfb57000 (62 entries)
bios0: vendor LENOVO version "R0IET29W (1.07 )" date 01/10/2017
bios0: LENOVO 20HNA004CD
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI SSDT SSDT HPET APIC MCFG ECDT SSDT SSDT
BOOT BATB SSDT SSDT SSDT WSMT DBGP DBG2 MSDM ASF! FPDT UEFI
acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4)
RP02(S4) RP04(S4) RP05(S4) RP06(S4) RP07(S4) RP08(S4) RP09(S4)
RP10(S4) RP11(S4) RP12(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2904000000 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 4 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus -1 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHC_
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: WRST
acpitz0 at acpi0: critical temperature is 128 degC
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "45N1113" serial 7484 type LION oem "LGC"
acpibat1 at acpi0: BAT1 model "45N1775" serial 6675 type LION oem "SANYO"
"INT3F0D" at acpi0 not configured
"LEN0071" at acpi0 not configured
"LEN2046" at acpi0 not configured
"INT0E0C" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT3394" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 2904 MHz: speeds: 2701, 2700, 2600, 2500,
2400, 2200, 2000, 1800, 1600, 1500, 1300, 1100, 800, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 2
rtsx0 at pci1 dev 0 function 0 "Realtek RTS522A Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 3
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x78, msi
ppb2 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 4
nvme0 at pci3 dev 0 function 0 "Samsung SM961/PM961 NVMe" rev 0x00:
msi, NVMe 1.2
nvme0: SAMSUNG MZVLW512HMJP-000L7, firmware 5L7QCXY7, serial S359NX0HC03068
scsibus1 at nvme0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <NVMe, SAMSUNG MZVLW512, 5L7Q> SCSI4
0/direct fixed
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors
pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0298, Intel/0x280b, using Realtek/0x0298
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
apic 2 int 16
iic0 at ichiic0
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x21: msi
em0: Hardware Initialization Failed
em0: Unable to initialize the hardware
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.10 addr 2
uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT Inc
Integrated Camera" rev 2.00/0.10 addr 3
video0 at uvideo0
ugen1 at uhub0 port 9 "Validity Sensors product 0x0097" rev 2.00/1.64 addr 4
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (850f2150f2cf8160.a) swap on sd0b dump on sd0b
iwm0: hw rev 0x230, fw ver 22.361476.0, address 00:28:f8:38:a9:0f
syncing disks... done
rebooting...
OpenBSD 6.1-current (GENERIC.MP) #113: Fri Jun 9 20:32:02 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8112676864 (7736MB)
avail mem = 7861014528 (7496MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xbfb57000 (62 entries)
bios0: vendor LENOVO version "R0IET29W (1.07 )" date 01/10/2017
bios0: LENOVO 20HNA004CD
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI SSDT SSDT HPET APIC MCFG ECDT SSDT SSDT
BOOT BATB SSDT SSDT SSDT WSMT DBGP DBG2 MSDM ASF! FPDT UEFI
acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4)
RP02(S4) RP04(S4) RP05(S4) RP06(S4) RP07(S4) RP08(S4) RP09(S4)
RP10(S4) RP11(S4) RP12(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2904000000 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 4 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus -1 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHC_
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: WRST
acpitz0 at acpi0: critical temperature is 128 degC
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "45N1113" serial 7484 type LION oem "LGC"
acpibat1 at acpi0: BAT1 model "45N1775" serial 6675 type LION oem "SANYO"
"INT3F0D" at acpi0 not configured
"LEN0071" at acpi0 not configured
"LEN2046" at acpi0 not configured
"INT0E0C" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT3394" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 2904 MHz: speeds: 2701, 2700, 2600, 2500,
2400, 2200, 2000, 1800, 1600, 1500, 1300, 1100, 800, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 2
rtsx0 at pci1 dev 0 function 0 "Realtek RTS522A Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 3
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x78, msi
ppb2 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 4
nvme0 at pci3 dev 0 function 0 "Samsung SM961/PM961 NVMe" rev 0x00:
msi, NVMe 1.2
nvme0: SAMSUNG MZVLW512HMJP-000L7, firmware 5L7QCXY7, serial S359NX0HC03068
scsibus1 at nvme0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <NVMe, SAMSUNG MZVLW512, 5L7Q> SCSI4
0/direct fixed
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors
pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0298, Intel/0x280b, using Realtek/0x0298
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
apic 2 int 16
iic0 at ichiic0
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x21: msi
em0: Hardware Initialization Failed
em0: Unable to initialize the hardware
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.10 addr 2
uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT Inc
Integrated Camera" rev 2.00/0.10 addr 3
video0 at uvideo0
ugen1 at uhub0 port 9 "Validity Sensors product 0x0097" rev 2.00/1.64 addr 4
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (850f2150f2cf8160.a) swap on sd0b dump on sd0b
iwm0: hw rev 0x230, fw ver 22.361476.0, address 00:28:f8:38:a9:0f
syncing disks... done
rebooting...
OpenBSD 6.1-current (GENERIC.MP) #113: Fri Jun 9 20:32:02 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8112676864 (7736MB)
avail mem = 7861014528 (7496MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xbfb57000 (62 entries)
bios0: vendor LENOVO version "R0IET29W (1.07 )" date 01/10/2017
bios0: LENOVO 20HNA004CD
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI SSDT SSDT HPET APIC MCFG ECDT SSDT SSDT
BOOT BATB SSDT SSDT SSDT WSMT DBGP DBG2 MSDM ASF! FPDT UEFI
acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4)
RP02(S4) RP04(S4) RP05(S4) RP06(S4) RP07(S4) RP08(S4) RP09(S4)
RP10(S4) RP11(S4) RP12(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2904000000 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2904.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 4 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus -1 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHC_
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: WRST
acpitz0 at acpi0: critical temperature is 128 degC
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "45N1113" serial 7484 type LION oem "LGC"
acpibat1 at acpi0: BAT1 model "45N1775" serial 6675 type LION oem "SANYO"
"INT3F0D" at acpi0 not configured
"LEN0071" at acpi0 not configured
"LEN2046" at acpi0 not configured
"INT0E0C" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT3394" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 2904 MHz: speeds: 2701, 2700, 2600, 2500,
2400, 2200, 2000, 1800, 1600, 1500, 1300, 1100, 800, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 2
rtsx0 at pci1 dev 0 function 0 "Realtek RTS522A Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 3
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x78, msi
ppb2 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 4
nvme0 at pci3 dev 0 function 0 "Samsung SM961/PM961 NVMe" rev 0x00:
msi, NVMe 1.2
nvme0: SAMSUNG MZVLW512HMJP-000L7, firmware 5L7QCXY7, serial S359NX0HC03068
scsibus1 at nvme0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <NVMe, SAMSUNG MZVLW512, 5L7Q> SCSI4
0/direct fixed
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors
pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0298, Intel/0x280b, using Realtek/0x0298
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
apic 2 int 16
iic0 at ichiic0
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x21: msi
em0: Hardware Initialization Failed
em0: Unable to initialize the hardware
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.10 addr 2
uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT Inc
Integrated Camera" rev 2.00/0.10 addr 3
video0 at uvideo0
ugen1 at uhub0 port 9 "Validity Sensors product 0x0097" rev 2.00/1.64 addr 4
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (850f2150f2cf8160.a) swap on sd0b dump on sd0b
iwm0: hw rev 0x230, fw ver 22.361476.0, address 00:28:f8:38:a9:0f
----------- Xorg.0.log --------------
[ 87.864] (--) checkDevMem: using aperture driver /dev/xf86
[ 87.884] (--) Using wscons driver on /dev/ttyC4
[ 87.896]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 87.897] X Protocol Version 11, Revision 0
[ 87.897] Build Operating System: OpenBSD 6.1 amd64
[ 87.897] Current Operating System: OpenBSD amphictyon.astro-gr.org
6.1 GENERIC.MP#113 amd64
[ 87.897] Build Date: 09 June 2017 08:46:56PM
[ 87.897]
[ 87.897] Current version of pixman: 0.34.0
[ 87.897] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 87.897] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 87.897] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 13
05:51:03 2017
[ 87.898] (==) Using config file: "/etc/xorg.conf"
[ 87.898] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 87.898] (==) No Layout section. Using the first Screen section.
[ 87.898] (**) |-->Screen "default screen" (0)
[ 87.898] (**) | |-->Monitor "default monitor"
[ 87.899] (**) | |-->Device "default device"
[ 87.899] (==) Disabling SIGIO handlers for input devices
[ 87.899] (==) Automatically adding devices
[ 87.899] (==) Automatically enabling devices
[ 87.899] (==) Not automatically adding GPU devices
[ 87.899] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 87.899] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 87.899] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 87.899] (II) The server relies on wscons to provide the list of
input devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 87.899] (II) Loader magic: 0x18bcd8433020
[ 87.899] (II) Module ABI versions:
[ 87.899] X.Org ANSI C Emulation: 0.4
[ 87.899] X.Org Video Driver: 20.0
[ 87.899] X.Org XInput driver : 22.1
[ 87.899] X.Org Server Extension : 9.0
[ 87.899] (--) PCI:*(0:0:2:0) 8086:5916:17aa:5062 rev 2, Mem @
0xe0000000/16777216, 0xd0000000/268435456, I/O @ 0x0000e000/64
[ 87.899] (II) LoadModule: "glx"
[ 87.901] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 87.905] (II) Module glx: vendor="X.Org Foundation"
[ 87.905] compiled for 1.18.4, module version = 1.0.0
[ 87.905] ABI class: X.Org Server Extension, version 9.0
[ 87.905] (==) AIGLX enabled
[ 87.905] (II) LoadModule: "wsfb"
[ 87.906] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so
[ 87.907] (II) Module wsfb: vendor="X.Org Foundation"
[ 87.907] compiled for 1.18.4, module version = 0.4.1
[ 87.907] ABI class: X.Org Video Driver, version 20.0
[ 87.907] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[ 87.907] (WW) Falling back to old probe method for wsfb
[ 87.907] (II) wsfb(0): using default device
[ 87.907] (EE) wsfb(0): no way to get depth info: Inappropriate
ioctl for device
[ 87.907] (II) UnloadModule: "wsfb"
[ 87.907] (EE) Screen(s) found, but none have a usable configuration.
[ 87.907] (EE)
Fatal server error:
[ 87.907] (EE) no screens found(EE)
[ 87.908] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 87.908] (EE) Please also check the log file at
"/var/log/Xorg.0.log" for additional information.
[ 87.908] (EE)
[ 87.908] (EE) Server terminated with error (1). Closing log file.
------------------------------------- My xorg.conf
------------------------------
Section "Monitor"
Identifier "default monitor"
#DisplaySize 311 170
EndSection
Section "Device"
Identifier "default device"
Driver "wsfb"
EndSection
Section "Screen"
Identifier "default screen"
Device "default device"
Monitor "default monitor"
EndSection
