Dear Listeners,

Let me know, please, if enclosure monitoring
is supported for disks attached to Supermicro
M28SAB drive cages (with two AMI MG9071 chips)
or similar backplanes. Drives work fine when
attached to some LSI 2008 controller but there
appear no "ses* at scsibus?" boot messages
(see below, disks attached to the drive cage
are sd4 ... sd11), jumper settings on the cage:
JP61 2-3: Fan disabled (there is no fan)
JP62 1-2: Enclosure monitor enabled

With best regards,
Jens



OpenBSD 6.1 (GENERIC.MP) #6: Mon May 22 20:34:30 CEST 2017

rob...@syspatch-61-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17154113536 (16359MB)
avail mem = 16629547008 (15859MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf06f0 (62 entries)
bios0: vendor American Megatrends Inc. version "0705" date 06/29/2010
bios0: ASUSTeK Computer INC. P7F-M WS
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET SSDT
acpi0: wakeup devices BR1E(S4) UAR1(S4) PS2K(S4) EUSB(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USBE(S4) USB4(S4) USB5(S4) USB6(S4) BR21(S4) BR22(S4) BR23(S4) P0P1(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1867.00 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 1867000680 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.73 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.73 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU L3426 @ 1.87GHz, 1866.73 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 7 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (BR1E)
acpiprt2 at acpi0: bus -1 (BR21)
acpiprt3 at acpi0: bus -1 (BR22)
acpiprt4 at acpi0: bus -1 (BR23)
acpiprt5 at acpi0: bus -1 (P0P1)
acpiprt6 at acpi0: bus 1 (P0P3)
acpiprt7 at acpi0: bus -1 (P0P4)
acpiprt8 at acpi0: bus -1 (P0P5)
acpiprt9 at acpi0: bus -1 (P0P6)
acpiprt10 at acpi0: bus 2 (BR20)
acpiprt11 at acpi0: bus 5 (BR26)
acpiprt12 at acpi0: bus 6 (BR27)
acpicpu0 at acpi0: !C3(350@17 mwait.1@0x20), !C3(500@17 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: !C3(350@17 mwait.1@0x20), !C3(500@17 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: !C3(350@17 mwait.1@0x20), !C3(500@17 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: !C3(350@17 mwait.1@0x20), !C3(500@17 mwait.1@0x10), C1(1000@1 mwait.1), PSS
"PNP0501" at acpi0 not configured
"PNP0303" at acpi0 not configured
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 1867 MHz: speeds: 1868, 1867, 1733, 1600, 1467, 1333, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: msi
pci1 at ppb0 bus 1
mpii0 at pci1 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi
mpii0: SAS9210-8i, firmware 16.0.0.0, MPI 2.0
scsibus1 at mpii0: 256 targets
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 7 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x05
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x05
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 6 "Intel 3400 PCIE" rev 0x05
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address bc:ae:c5:05:5b:71
ppb5 at pci0 dev 28 function 7 "Intel 3400 PCIE" rev 0x05
pci6 at ppb5 bus 6
em1 at pci6 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address bc:ae:c5:05:5b:b1
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 7 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci7 at ppb6 bus 7
vga1 at pci7 dev 2 function 0 "3DFX Voodoo3" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 3420 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
ahci0: port 4: 1.5Gb/s
ahci0: port 5: 1.5Gb/s
scsibus2 at ahci0: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, SSDSA2SH064G1GC, 045C> SCSI3 0/direct fixed naa.5001517959470944
sd0: 61057MB, 512 bytes/sector, 125045424 sectors
sd1 at scsibus2 targ 1 lun 0: <ATA, SSDSA2SH032G1GN, 045C> SCSI3 0/direct fixed naa.50015179594773ba
sd1: 30517MB, 512 bytes/sector, 62500000 sectors
sd2 at scsibus2 targ 2 lun 0: <ATA, INTEL SSDSA2VP02, 2CV1> SCSI3 0/direct fixed naa.50015179595d23dc
sd2: 19087MB, 512 bytes/sector, 39091248 sectors, thin
sd3 at scsibus2 targ 3 lun 0: <ATA, INTEL SSDSA2VP02, 2CV1> SCSI3 0/direct fixed naa.50015179595d23a4
sd3: 19087MB, 512 bytes/sector, 39091248 sectors, thin
cd0 at scsibus2 targ 4 lun 0: <Optiarc, DVD RW AD-7260S, 1.00> ATAPI 5/cdrom removable cd1 at scsibus2 targ 5 lun 0: <MATSHITA, LKM-KB23, A232> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 7 int 18
iic0 at ichiic0
sdtemp0 at iic0 addr 0x18: stts424e02
sdtemp1 at iic0 addr 0x19: stts2002
sdtemp2 at iic0 addr 0x1a: stts424e02
sdtemp3 at iic0 addr 0x1b: stts2002
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM registered ECC PC3-10600 with thermal sensor spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM registered ECC PC3-10600 with thermal sensor spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM registered ECC PC3-10600 with thermal sensor spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM registered ECC PC3-10600 with thermal sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627DHG
vmm0 at mainbus0: VMX/EPT
sd4 at scsibus1 targ 0 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct fixed naa.5000cca01305d3a8
sd4: 381554MB, 512 bytes/sector, 781422768 sectors
sd5 at scsibus1 targ 1 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct fixed naa.5000cca0130bac48
sd5: 381554MB, 512 bytes/sector, 781422768 sectors
sd6 at scsibus1 targ 2 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct fixed naa.5000cca013040ab4
sd6: 381554MB, 512 bytes/sector, 781422768 sectors
sd7 at scsibus1 targ 3 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct fixed naa.5000cca01303eb10
sd7: 381554MB, 512 bytes/sector, 781422768 sectors
sd8 at scsibus1 targ 4 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct fixed naa.5000cca01303ea78
sd8: 381554MB, 512 bytes/sector, 781422768 sectors
sd9 at scsibus1 targ 5 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct fixed naa.5000cca0130c9e48
sd9: 381554MB, 512 bytes/sector, 781422768 sectors
sd10 at scsibus1 targ 6 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct fixed naa.5000cca01306b400
sd10: 381554MB, 512 bytes/sector, 781422768 sectors
sd11 at scsibus1 targ 7 lun 0: <HITACHI, SLR5A-S400SS, ABAB> SCSI4 0/direct fixed naa.5000cca013044b28
sd11: 381554MB, 512 bytes/sector, 781422768 sectors
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech Optical USB Mouse" rev 2.00/3.40 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
umass0 at uhub3 port 4 configuration 1 interface 0 "Generic Mass Storage Device" rev 2.00/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd12 at scsibus3 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable sd13 at scsibus3 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct removable sd14 at scsibus3 targ 1 lun 2: <Generic-, SM/xD-Picture, 1.02> SCSI0 0/direct removable sd15 at scsibus3 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct removable uhidev1 at uhub3 port 4 configuration 1 interface 1 "Generic Mass Storage Device" rev 2.00/1.00 addr 4
uhidev1: iclass 3/0, 4 report ids
uhid0 at uhidev1 reportid 4: input=7, output=0, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (78faa8282eb6f8fa.a) swap on sd0b dump on sd0b





Reply via email to