On 2006-01-19 15:42, Stuart Henderson wrote:
> No dmesg, so it's difficult to help you...
Ok, here goes:
(there might be typos, since I write down what I read on the screen next
to me...)
=========================
OpenBSD 3.8 (RAMDISK_CD) #794: Sat Sep 10 15:58:32 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Celeron(R) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,TM2,CNXT-ID
real mem = 469012480 (458020K)
avail mem = 421904384 (412016K)
using 4278 buffers containing 23552000 bytes (23000K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/05/05, BIOS32 rev. 0 @ 0xf0010
apm0 at bios0: Power Management spec V1.2
apm0: flags 20102 dobusy 0 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5d60/144 (7 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x10b9 product 0x1573
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
WARNING: can't reserve area for I/O APIC.
WARNING: can't reserve area for Local APIC.
WARNING: can't reserve area for BIOS PROM.
bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x5600
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5a33 rev 0x01
ppb0 at pci0 dev 1 functon 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mix 1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 25 function 0 vendor "Acer Labs", unknown product
0x5249 rev 0x00
pci2 at ppb1 bus 2
ral0 at pci2 dev 21 function 0 "Ralink RT2560" rev 0x01: irq 5, address
00:14:85:16:b2:2c
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
vendor "Acer Labs", unknown product 0x5263 (class network subclass
ethernet, rev 0x50) at pci0 dev 27 function 0 not configured
ohci0 at pci0 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: irq 10,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: irq 5,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 28 function 2 "Acer Labs M5237 USB" rev 0x03: irq 5,
version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 28 function 3 vendor "Acer Labs", unknown product
0x5239 rev 0x01: irq 5
isb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Acer LAbs EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
vendor "Acer Labs", unknown product 0x5455 (class multimedia subclass
audio, rev 0x20) at pci0 dev 29 function 0 not configured
pcib0 at pci0 dev 30 function 0 vendor "Acer Labs", unknown product
0x1573 rev 0x31
"Acer Labs M7101 Power" rev 0x00 at pci0 dev 30 function 1 not configured
pciide0 at pci0 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc7:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <BENQ, DVD DD DW1640, BSLB> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
vendor "Acer Labs", unknown product 0x5287 (class mass storage subclass
SATA, rev 0x02) at pci0 dev 31 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550A, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cul, 2 head, 18 sec
biomask fed netmask ffed ttymask ffef
rd0: fixed, 3800 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
=========================
Regards,
/Joakim
--
http://www.df.lth.se/~jokke/
