small add on: this happens only when plug device on a working machine (if device recognized while system boot, it acts normal) And if unplug it later half (physically) and plug again it works ok.
On 05/04/17 16:10, Kirill wrote: > Hello! > There is a problem with my WD external disk on 6.1. on 6.0 there are no > problems. > > dmesg: > nightlord@work:[~]% dmesg > OpenBSD 6.1 (GENERIC.MP) #5: Thu Apr 13 11:26:43 MSK 2017 > r...@work.nightbbs.ru:/usr/obj/sys/arch/amd64/compile/GENERIC.MP > real mem = 2056990720 (1961MB) > avail mem = 1990025216 (1897MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe9f80 (85 entries) > bios0: vendor Hewlett-Packard version "786G1 v01.08" date 08/25/2008 > bios0: Hewlett-Packard HP Compaq dc7900 Small Form Factor > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET DMAR > acpi0: wakeup devices COM1(S4) PCI0(S4) PEG1(S4) PEG2(S4) IGBE(S4) > PCX1(S4) PCX2(S4) PCX5(S4) PCX6(S4) HUB_(S4) USB1(S3) USB2(S3) USB3(S3) > USB4(S3) USB5(S3) USB6(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz, 3159.08 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR > cpu0: 6MB 64b/line 16-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 332MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz, 3158.73 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR > cpu1: 6MB 64b/line 16-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf4000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG1) > acpiprt2 at acpi0: bus -1 (PEG2) > acpiprt3 at acpi0: bus 32 (PCX1) > acpiprt4 at acpi0: bus -1 (PCX2) > acpiprt5 at acpi0: bus 48 (PCX5) > acpiprt6 at acpi0: bus -1 (PCX6) > acpiprt7 at acpi0: bus 7 (HUB_) > acpicpu0 at acpi0: !C2(500@17 mwait.3@0x10), C1(1000@1 mwait.1) > acpicpu1 at acpi0: !C2(500@17 mwait.3@0x10), C1(1000@1 mwait.1) > "PNP0F13" at acpi0 not configured > "PNP0303" at acpi0 not configured > "PNP0501" at acpi0 not configured > "PNP0700" at acpi0 not configured > "PNP0003" at acpi0 not configured > acpibtn0 at acpi0: PBTN > "PNP0C14" at acpi0 not configured > cpu0: unknown Enhanced SpeedStep CPU, msr 0x0616492206004922 > cpu0: using only highest and lowest power states > cpu0: Enhanced SpeedStep 3159 MHz: speeds: 24333, 2000 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03 > inteldrm0 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03 > drm0 at inteldrm0 > intagp0 at inteldrm0 > agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 > inteldrm0: msi > inteldrm0: 1280x1024, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured > "Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured > pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA > (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide0: using apic 1 int 18 for native-PCI interrupt > pciide0: channel 0 ignored (not responding; disabled or no drives?) > pciide0: channel 1 ignored (not responding; disabled or no drives?) > puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 1 com > com4 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo > com4: probed fifo depth: 15 bytes > em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: msi, > address 00:23:7d:4e:a2:5c > uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20 > uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21 > uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22 > ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 22 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02: msi > azalia0: codecs: Analog Devices AD1884A > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02: msi > pci1 at ppb0 bus 32 > ppb1 at pci0 dev 28 function 4 "Intel 82801JD PCIE" rev 0x02: msi > pci2 at ppb1 bus 48 > uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20 > uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21 > uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22 > ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 20 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2 > pci3 at ppb2 bus 7 > pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02 > ahci0 at pci0 dev 31 function 2 "Intel 82801JD AHCI" rev 0x02: msi, AHCI 1.2 > ahci0: port 0: 3.0Gb/s > ahci0: port 1: 1.5Gb/s > ahci0: PHY offline on port 2 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, ST3250310AS, 3.AH> SCSI3 0/direct > fixed t10.ATA_ST3250310AS_6RYG2JPT_ > sd0: 238475MB, 512 bytes/sector, 488397168 sectors > cd0 at scsibus1 targ 1 lun 0: <ATAPI, DVD A DH16A6L, ZH37> ATAPI 5/cdrom > removable > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > umsm0 at uhub0 port 5 configuration 1 interface 0 "HUAWEI Technology > HUAWEI Mobile" rev 2.00/1.02 addr 2 > ucom0 at umsm0 > umsm1 at uhub0 port 5 configuration 1 interface 1 "HUAWEI Technology > HUAWEI Mobile" rev 2.00/1.02 addr 2 > ucom1 at umsm1 > uhidev0 at uhub2 port 1 configuration 1 interface 0 "Cherry > Mikroschalter product 0x0011" rev 2.00/1.00 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub2 port 2 configuration 1 interface 0 "Logitech USB > Receiver" rev 2.00/29.01 addr 3 > uhidev1: iclass 3/1 > ukbd1 at uhidev1: 8 variable keys, 6 key codes > wskbd2 at ukbd1 mux 1 > wskbd2: connecting to wsdisplay0 > uhidev2 at uhub2 port 2 configuration 1 interface 1 "Logitech USB > Receiver" rev 2.00/29.01 addr 3 > uhidev2: iclass 3/1, 17 report ids > ums0 at uhidev2 reportid 2: 16 buttons, Z and W dir > wsmouse0 at ums0 mux 0 > uhid0 at uhidev2 reportid 3: input=4, output=0, feature=0 > uhid1 at uhidev2 reportid 4: input=1, output=0, feature=0 > uhid2 at uhidev2 reportid 16: input=6, output=6, feature=0 > uhid3 at uhidev2 reportid 17: input=19, output=19, feature=0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (2cfc7c7795c390e7.a) swap on sd0b dump on sd0b > uhub0: port 6, set config 0 at addr 3 failed > uhub0: device problem, disabling port 6 >
