Hi, I get a kernel panic on a fresh 3.8 machine. As far as I can tell all the hardware is functional. The install-process went without any problem whatsover. The only commands issued after the install (upon first boot) are these :
cd /usr/src ftp ftp://ftp.openbsd.org/pub/OpenBSD/3.8/src.tar.gz tar zxvf src.tar.gz cd /usr/src cvs -d [EMAIL PROTECTED]:/cvs -q up -rOPENBSD_3_8 -Pd cd /usr/src/sys/arch/amd64/conf/ /usr/sbin/config GENERIC cd /usr/src/sys/arch/amd64/compile/GENERIC/ make clean && make depend && make cd /usr/src/sys/arch/amd64/compile/GENERIC/ cp /bsd /bsd-old cp bsd /bsd reboot cd /usr/src rm -r /usr/obj/* make obj make build And this is were it ends. I entered these commands from a remote session and this is the last output (I copied the first lines: after make build and then the last lines) : # make build cd /usr/src/share/mk && exec make install install -c -o root -g bin -m 444 bsd.README bsd.doc.mk bsd.dep.mk bsd.lib.mk bsd.man.mk bsd.nls.mk bsd.obj.mk bsd.own.mk bsd.port.mk bsd.port.subdir.mk bsd.prog.mk bsd.regress.mk bsd.subdir.mk bsd.sys.mk sys.mk bsd.lkm.mk /usr/share/mk cd /usr/src/include && make prereq && exec make includes ... checking dynamic linker characteristics... openbsd3.8 ld.so checking command to parse nm output... ok checking if libtool supports shared libraries... yes checking whether to build shared libraries... no checking whether to build static libraries... yes panic ------ panic kernel: protection fault trap, code=0 Stopped at uvm_map_lookup_entry+0x60: cmpq 0x40(%rax),%rsi trace ------ uvm_map_lookup_entry() at uvm_map_lookup_entry+0x60 uvm_fault_unwire_locked() at uvm_fault_unwire_locked+0x221 uvm_fault() at uvm_fault+0x63 trap() at trap+0x2e2 --- trap (number 6) --- end trace frame: 0x0, count: -4 0x40065e: ps --- Not the full ps output because it's rather long to copy it from the screen. There is an * next to this line 8676 19613 15431 0 7 0x4006 sh dmesg ------ OpenBSD 3.8-stable (GENERIC) #0: Tue Jan 17 09:44:53 CET 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 3756490752 (3668448K) avail mem = 3224371200 (3148800K) using 22937 buffers containing 375857152 bytes (367048K) of memory mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: AMD Athlon(tm) 64 Processor 3200+, 2009.48 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative pci0 at mainbus0 bus 0: configuration mode 1 "Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured "Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured "Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured ohci0 at pci0 dev 2 function 0 "Nvidia nForce4 USB" rev 0xa2: irq 5, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ehci0 at pci0 dev 2 function 1 "Nvidia nForce4 USB" rev 0xa3: irq 10 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 uhub1: Nvidia EHCI root hub, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xf2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-110D, 1.17> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 7 function 0 "Nvidia nForce4 SATA 1" rev 0xf3: DMA pciide1: using irq 11 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <WDC WD1600JS-00MHB0> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1 at pciide1 channel 1 drive 0: <WDC WD1600JS-00MHB0> wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 pciide2 at pci0 dev 8 function 0 "Nvidia nForce4 SATA 2" rev 0xf3: DMA pciide2: using irq 10 for native-PCI interrupt ppb0 at pci0 dev 9 function 0 "Nvidia nForce4 PCI-PCI" rev 0xa2 pci1 at ppb0 bus 1 vga1 at pci1 dev 5 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) em0 at pci1 dev 9 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: irq 11, address: 00:04:23:c3:86:c4 em1 at pci1 dev 9 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: irq 5, address: 00:04:23:c3:86:c5 "Nvidia CK804 LAN" rev 0xa3 at pci0 dev 10 function 0 not configured ppb1 at pci0 dev 11 function 0 "Nvidia nForce4 PCIE" rev 0xa3 pci2 at ppb1 bus 2 ppb2 at pci0 dev 12 function 0 "Nvidia nForce4 PCIE" rev 0xa3 pci3 at ppb2 bus 3 ppb3 at pci0 dev 13 function 0 "Nvidia nForce4 PCIE" rev 0xa3 pci4 at ppb3 bus 4 bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 5 address 00:e0:81:58:51:da brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb4 at pci0 dev 14 function 0 "Nvidia nForce4 PCIE" rev 0xa3 pci5 at ppb4 bus 5 pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 isa0 at mainbus0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 dkcsum: wd0 matches BIOS drive 0x80 wd1: no disk label dkcsum: wd1 matches BIOS drive 0x81 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302
