Hello, until recently I've been a Linux user but have decided to get my feet
wet with OpenBSD. I had a few basic questions that I wasn't able to solve after
reading the FAQ and doing some web searches and was hoping someone could point
me in the right direction. (I'm running a freshly built 3.8-current on an amd64
machine). In any case, here are the things I'm trying to do:
1. I'd like to switch consoles with Alt-F<N> instead of Ctrl-Alt-F<N>. How can
I do that? (The main reason is that I prefer to be able to switch consoles with
one hand and using the Ctrl key is a bit awkward for me to do without using
both hands.)
2. My mouse doesn't seem to work under X. I have a USB mouse and see the
following message in dmesg: "uhub0: device problem, disabling port 1" and not
sure if this is the indicating the problem. In any case, I've enclosed the full
dmesg below and I'm happy to give out any more information that's needed.
Thanks very much for any help,
Daniel
OpenBSD 3.8-current (GENERIC) #0: Mon Jan 16 19:21:53 EST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 938012672 (916028K)
avail mem = 791314432 (772768K)
using 22937 buffers containing 94007296 bytes (91804K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 1791.09 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 17 function 0 "ATI IXP400 SATA" rev 0x00: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide1 at pci0 dev 18 function 0 "ATI IXP400 SATA" rev 0x00: DMA
pciide1: using irq 10 for native-PCI interrupt
pciide1: port 0: device present, speed: 1.5Gb/s
wd0 at pciide1 channel 0 drive 0: <ST3160827AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using BIOS timings, Ultra-DMA mode 6
ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x00: irq 10, version 1.0,
legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x00: irq 10, version 1.0,
legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x00: irq 10
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
"ATI IXP400 SMBus" rev 0x04 at pci0 dev 20 function 0 not configured
pciide2 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x00: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide2 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4480B, 1.02> SCSI0 5/cdrom
removable
cd0(pciide2:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pcib0 at pci0 dev 20 function 3 "ATI IXP400 ISA" rev 0x00
ppb1 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x00
pci2 at ppb1 bus 2
"Texas Instruments ACX100A" rev 0x00 at pci2 dev 0 function 0 not configured
rl0 at pci2 dev 3 function 0 "Realtek 8139" rev 0x10: irq 5, address
00:13:d3:09:d0:99
rlphy0 at rl0 phy 0: RTL internal phy
"VIA VT6306 FireWire" rev 0x80 at pci2 dev 4 function 0 not configured
auixp0 at pci0 dev 20 function 5 "ATI IXP400 AC97" rev 0x00: irq 3
auixp0: soft resetting aclink
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
uhub0: device problem, disabling port 1
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ac97: codec id 0x414c4780 (Avance Logic ALC658)
ac97: codec features 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auixp0
