I have an old soekris running 5.8 -current. When I try to boot from the
latest snapshot bsd.rd, I cannot get a list of packages from any mirror I
tried:
Unable to get a verified list of distribution sets

I
s there any easy way to get around this ?

T
​hanks

​
boot> boot bsd.rd
booting hd1a:bsd.rd: 3210664+1332224+3342268+0+446464
[72+289376+278272]=0x87db44
entry point at 0x2000d4

Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2017 OpenBSD. All rights reserved.
https://www.OpenBSD.org

OpenBSD 6.0-current (RAMDISK_CD) #200: Thu Mar  2 11:17:49 MST 2017
    dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class)
500 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
real mem  = 536408064 (511MB)
avail mem = 517046272 (493MB)
mainbus0 at root
bios0 at mainbus0: date 20/70/03, BIOS32 rev. 0 @ 0xfac40
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0xa800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
0:20:0: io address conflict 0x6100/0x100
0:20:0: io address conflict 0x6200/0x200
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
"AMD Geode LX Crypto" rev 0x00 at pci0 dev 1 function 2 not configured
vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address 00:00:24:ca:40:74
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5,
address 00:00:24:ca:40:75
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9,
address 00:00:24:ca:40:76
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12,
address 00:00:24:ca:40:77
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
ral0 at pci0 dev 14 function 0 "Ralink RT2561S" rev 0x00: irq 10, address
00:22:6b:9b:2b:f0
ral0: MAC/BBP RT2561C, RF RT2527
pcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03
pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFH2-4096>
wd0: 4-sector PIO, LBA, 3919MB, 8027712 sectors
wd1 at pciide0 channel 0 drive 1: <Hitachi HTE541616J9SA00>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 15, version
1.0, legacy support
ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 15
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbc0: unable to establish interrupt for irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
    96  openbsd.mirrors.pair.com                           Pittsburgh, PA,
USA
    97  mirror.esc7.net/pub/OpenBSD                            Dallas, TX,
USA
    98  mirror.jmu.edu/pub/OpenBSD                       Harrisonburg, VA,
USA
HTTP Server? (hostname, list#, 'done' or '?') [openbsd.cs.toronto.edu] 6
HTTP Server? (hostname, list#, 'done' or '?') [openbsd.delfic.org] done
Location of sets? (disk http or 'done') [http]
HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none]
HTTP Server? (hostname, list#, 'done' or '?') [openbsd.delfic.org]
Server directory? [/pub/OpenBSD/snapshots/i386]
*Unable to get a verified list of distribution sets.*


--
-
Rick Ballard
Dartmouth,
​ ​
Nova Scotia, Canada

Reply via email to