Hello Misc@
I just installed OpenBSD 6.0 on a Dell PowerEdge R230 and it went well
except that I did not get EFI to work.
First boot with BIOS in EFI mode from USB install60.fs started off with the
boot> prompt, loading kernel, and then it hung just after printing
entry point at 0xf001000 [7205c760, 34000804, 24448b12, b4c0a304]
approximately. So the kernel did not start - no blue printouts.
Short story - I did set the BIOS to "BIOS" boot mode (their name for
MBR, apparently). Installed by creating the GPT table manually (fdisk -ig
-b 960 sd1) and then did a normal install. Checked that installboot with -v
claimed to install the EFI code. Set the BIOS back to EFI mode and
one-shot booted of sd1. It hung at the same point.
I had Secure Boot disabled all the time.
Any clues why EFI did not work for me on this machine?
Here is the dmesg after installing to softraid mirror on sd0 and sd1:
OpenBSD 6.0 (GENERIC.MP) #2: Mon Oct 17 10:22:47 CEST 2016
r...@stable-60-amd64.mtier.org:/binpatchng/work-binpatch60-amd64/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 17119961088 (16326MB)
avail mem = 16596631552 (15827MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x8ef68000 (43 entries)
bios0: vendor Dell Inc. version "1.4.5" date 08/09/2016
bios0: Dell Inc. PowerEdge R230
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP SSDT TPM2 BOOT SSDT SLIC HPET LPIT APIC MCFG WDAT
SSDT DBGP DBG2 SSDT SSDT SSDT SSDT DMAR SSDT SSDT PRAD HEST BERT ERST EINJ
FPDT
acpi0: wakeup devices PEGP(S0) PEG0(S0) PEGP(S0) PEG1(S0) PEGP(S0) PEG2(S0)
XHC_(S0) XDCI(S0) PXSX(S0) RP01(S0) PXSX(S0) RP02(S0) PXSX(S0) RP03(S0)
PXSX(S0) RP04(S0) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz, 3293.61 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz, 3292.34 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz, 3292.34 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz, 3292.34 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt0: no apic found for irq 32
acpiprt0: no apic found for irq 33
acpiprt0: no apic found for irq 34
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus 2 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus -1 (RP04)
acpiprt8 at acpi0: bus -1 (RP05)
acpiprt9 at acpi0: bus -1 (RP06)
acpiprt10 at acpi0: bus -1 (RP07)
acpiprt11 at acpi0: bus -1 (RP08)
acpiprt12 at acpi0: bus 3 (RP09)
acpiprt13 at acpi0: bus -1 (RP10)
acpiprt14 at acpi0: bus 4 (RP11)
acpiprt15 at acpi0: bus -1 (RP12)
acpiprt16 at acpi0: bus -1 (RP13)
acpiprt17 at acpi0: bus -1 (RP14)
acpiprt18 at acpi0: bus -1 (RP15)
acpiprt19 at acpi0: bus -1 (RP16)
acpiprt20 at acpi0: bus -1 (RP17)
acpiprt21 at acpi0: bus -1 (RP18)
acpiprt22 at acpi0: bus -1 (RP19)
acpiprt23 at acpi0: bus -1 (RP20)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
"ACPI000D" at acpi0 not configured
"INT3F0D" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0501" at acpi0 not configured
"IPI0001" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
"PNP0C33" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
ipmi at mainbus0 not configured
memory map conflict 0xe00fd000/0x1000
memory map conflict 0xfe000000/0x11000
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x1918 rev
0x07
ppb0 at pci0 dev 1 function 0 "Intel Core 6G PCIE" rev 0x07: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 1 function 1 "Intel Core 6G PCIE" rev 0x07: msi
pci2 at ppb1 bus 2
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
"Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
vendor "Intel", unknown product 0xa13b (class communications subclass
miscellaneous, rev 0x31) at pci0 dev 22 function 1 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi, AHCI
1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST1000NM0055-1V4, > SCSI3 0/direct
fixed naa.5000c5009267a5c7
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, ST1000NM0055-1V4, > SCSI3 0/direct
fixed naa.5000c500926799c8
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 3
3:0:0: mem address conflict 0xfffc0000/0x40000
3:0:1: mem address conflict 0xfffc0000/0x40000
bge0 at pci3 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0
(0x5720000), APE firmware NCSI 1.3.16.0: msi, address 10:98:36:a9:c7:35
brgphy0 at bge0 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0
(0x5720000), APE firmware NCSI 1.3.16.0: msi, address 10:98:36:a9:c7:36
brgphy1 at bge1 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 29 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
pci6 at ppb5 bus 6
ppb6 at pci6 dev 0 function 0 "Renesas SH7758 PCIE-PCI" rev 0x00
pci7 at ppb6 bus 7
vga1 at pci7 dev 0 function 0 "Matrox MGA G200eR" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0xa149 rev
0x31
"Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31: apic 2
int 16
iic0 at ichiic0
sdtemp0 at iic0 addr 0x19: tse2004gb2
sdtemp1 at iic0 addr 0x1b: tse2004gb2
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub1 at uhub0 port 3 "no manufacturer Gadget USB HUB" rev 2.00/0.00 addr 2
uhub2 at uhub0 port 4 "ATEN International product 0x8021" rev 1.10/1.00
addr 3
uhidev0 at uhub2 port 1 configuration 1 interface 0 "ATEN CS1708A V1.4.131"
rev 1.10/1.00 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "ATEN CS1708A V1.4.131"
rev 1.10/1.00 addr 4
uhidev1: iclass 3/1
ums0 at uhidev1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct
fixed
sd2: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd2a (05b1917da05f48e3.a) swap on sd2b dump on sd2b
--
/ Raimo Niskanen, Erlang/OTP, Ericsson AB
