Hello there guys,
A snapshot of 3.8 -current was downloaded a couple of days ago. I
experienced some issues with it so I waited about a week. After trying
the new snapshots, the issues still persisted.
I experience panics whenever I reboot the system, be it right after
install or after the first time the installed system is rebooted.
Here is the installation session (very long, apologies if it's overkill
but I've been told before that I don't include enough info). I took the
liberty of removing all the blahblah supposed to guide users:
*************************
*** BEGIN INSTALL LOG ***
*************************
boot>
booting cd0a:/3.8/i386/bsd.rd: 4430228+740764 [52+154624+141373]=0x536d18
entry point at 0x100120
U
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.8-current (RAMDISK_CD) #989: Fri Jan 13 15:28:06 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: AMD Athlon(tm) XP 2500+ ("AuthenticAMD" 686-class, 512KB L2 cache)
1.84 GH
z
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
X,FXSR,SSE
real mem = 1073262592 (1048108K)
avail mem = 973778944 (950956K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(2d) BIOS, date 09/14/04, BIOS32 rev. 0 @ 0xfb470
apm0 at bios0: Power Management spec V1.2
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 5 7 10 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x4800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Nvidia nForce2 PCI" rev 0xa2
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 1 not configured
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 2 not configured
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 3 not configured
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 4 not configured
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "Nvidia nForce2 ISA" rev 0xa3
"Nvidia nForce2 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "Nvidia nForce2 USB" rev 0xa3: irq 7,
version 1.0
, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 1 "Nvidia nForce2 USB" rev 0xa3: irq 5,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Nvidia OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 2 function 2 "Nvidia nForce2 USB" rev 0xa3: irq 12
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Nvidia EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
"Nvidia nForce2 Audio" rev 0xa2 at pci0 dev 5 function 0 not configured
"Nvidia nForce2 AC97" rev 0xa1 at pci0 dev 6 function 0 not configured
ppb0 at pci0 dev 8 function 0 "Nvidia nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
ath0 at pci1 dev 8 function 0 "Atheros AR5212" rev 0x01: irq 12
ath0: AR5213 7.9 phy 4.5 rf2112a 5.6: RF radio not supported
re0 at pci1 dev 9 function 0 "US Robotics USR997902" rev 0x10: irq 10,
address 00:c0:49:f4:23:04
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
pciide0 at pci1 dev 10 function 0 "CMD Technology SiI3114 SATA" rev
0x02: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide0: port 2: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 2 drive 0: <WDC WD1600JS-88MHB0>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:2:0): using BIOS timings, Ultra-DMA mode 6
pciide0: port 3: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 3 drive 0: <WDC WD1600JD-00HBB0>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide0:3:0): using BIOS timings, Ultra-DMA mode 6
pciide1 at pci0 dev 9 function 0 "Nvidia nForce2 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd2 at pciide1 channel 0 drive 0: <ST380023A>
wd2: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd2(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, DVDR PX-708A, 1.07> SCSI0
5/cdrom removable
atapiscsi1 at pciide1 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <PIONEER, DVD-ROM DVD-119, 1.05> SCSI0
5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 4
"Nvidia nForce2 FireWire" rev 0xa3 at pci0 dev 13 function 0 not configured
ppb1 at pci0 dev 30 function 0 "Nvidia nForce2 AGP" rev 0xa2
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ATI Radeon 9500/9700" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"ATI Radeon 9500/9700 Sec" rev 0x00 at pci2 dev 0 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fbe5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
vendor 0x05a9 product 0x0511, class 0/0, rev 1.00/1.00, addr 2, uhub1
port 1 not configured
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
1.10/3.00,addr 3, iclass 3/1
uhid at uhidev0 not configured
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x81
wd1: no disk label
dkcsum: wd1 matches BIOS drive 0x82
dkcsum: wd2 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
(I)nstall, (U)pgrade or (S)hell? i
...
Terminal type? [vt220]
kbd(8) mapping? ('L' for list) [none] be
kbd: keyboard mapping set to be
...
Proceed with install? [no] yes
Cool! Let's get to it.
...
Available disks are: wd0 wd1 wd2.
Which one is the root disk? (or 'done') [done] wd2
Do you want to use *all* of wd2 for OpenBSD? [no] no
...
Disk: wd2 geometry: 9729/255/63 [156296385 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
*0: 07 0 1 1 - 7138 254 63 [ 63: 114687972 ] HPFS/QNX/AUX
1: A6 7139 0 1 - 9728 254 63 [ 114688035: 41608350 ] OpenBSD
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
Enter 'help' for information
fdisk: 1> q
Here is the partition information you chose:
Disk: wd2 geometry: 9729/255/63 [156296385 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
*0: 07 0 1 1 - 7138 254 63 [ 63: 114687972 ] HPFS/QNX/AUX
1: A6 7139 0 1 - 9728 254 63 [ 114688035: 41608350 ] OpenBSD
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
...
# Inside MBR partition 1: type A6 start 114688035 size 41608350
Treating sectors 114688035-156296385 as the OpenBSD portion of the disk.
You can use the 'b' command to change this.
Initial label editor (enter '?' for help at any prompt)
p m
device: /dev/rwd2c
type: ESDI
disk: ESDI/IDE disk
label: ST380023A
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 16383
total bytes: 76319.1M
free bytes: 1884.1M
rpm: 3600
16 partitions:
# size offset fstype [fsize bsize cpg]
a: 511.5M 56000.0M 4.2BSD 2048 16384 328
b: 1536.1M 56511.5M swap
c: 76319.1M 0.0M unused 0 0
d: 3072.2M 58047.6M 4.2BSD 2048 16384 328
e: 3072.2M 61119.8M 4.2BSD 2048 16384 328
f: 5120.2M 64192.1M 4.2BSD 2048 16384 328
g: 5120.2M 69312.3M 4.2BSD 2048 16384 328
i: 56000.0M 0.0M unknown
m a
FS type: [4.2BSD]
offset: [114688035]
size: [1047501]
mount point: [none] /
m d
FS type: [4.2BSD]
offset: [118881504]
size: [6291936]
mount point: [none] /var
m e
FS type: [4.2BSD]
offset: [125173440]
size: [6291936]
mount point: [none] /tmp
m f
FS type: [4.2BSD]
offset: [131465376]
size: [10486224]
mount point: [none] /usr
m g
FS type: [4.2BSD]
offset: [141951600]
size: [10486224]
mount point: [none] /home
w
No label changes.
q
No label changes.
Mount point for wd2d (size=3145968k)? (or 'none' or 'done') [/var]
Mount point for wd2e (size=3145968k)? (or 'none' or 'done') [/tmp]
Mount point for wd2f (size=5243112k)? (or 'none' or 'done') [/usr]
Mount point for wd2g (size=5243112k)? (or 'none' or 'done') [/home] done
Available disks are: wd0 wd1.
Which one do you wish to initialize? (or 'done') [done] done
OpenBSD filesystems:
wd2a /
wd2d /var
wd2e /tmp
wd2f /usr
wd2g /home
The next step *DESTROYS* all existing data on these partitions!
Are you really sure that you're ready to proceed? [no] yes
/dev/rwd2a: 1047500 sectors in 1040 cylinders of 16 tracks, 63 sectors
511.5MB in 4 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
/dev/rwd2d: 6291936 sectors in 6242 cylinders of 16 tracks, 63 sectors
3072.2MB in 20 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
/dev/rwd2e: 6291936 sectors in 6242 cylinders of 16 tracks, 63 sectors
3072.2MB in 20 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
/dev/rwd2f: 10486224 sectors in 10403 cylinders of 16 tracks, 63 sectors
5120.2MB in 32 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
/dev/rwd2g: 10486224 sectors in 10403 cylinders of 16 tracks, 63 sectors
5120.2MB in 32 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
/dev/wd2a on /mnt type ffs (rw, asynchronous, local, ctime=Sun Jan 15
01:34:26 2006)
/dev/wd2g on /mnt/home type ffs (rw, asynchronous, local, nodev, nosuid,
ctime=Sun Jan 15 01:34:26 2006)
/dev/wd2e on /mnt/tmp type ffs (rw, asynchronous, local, nodev, nosuid,
ctime=Sun Jan 15 01:34:26 2006)
/dev/wd2f on /mnt/usr type ffs (rw, asynchronous, local, nodev,
ctime=Sun Jan 15 01:34:26 2006)
/dev/wd2d on /mnt/var type ffs (rw, asynchronous, local, nodev, nosuid,
ctime=Sun Jan 15 01:34:26 2006)
System hostname? (short form, e.g. 'foo') dessler
Configure the network? [yes] yes
Available interfaces are: re0.
Which one do you wish to initialize? (or 'done') [re0] re0
Symbolic (host) name for re0? [dessler]
The media options for re0 are currently
media: Ethernet autoselect (10baseT)
Do you want to change the media options? [no]
IPv4 address for re0? (or 'none' or 'dhcp') dhcp
Issuing hostname-associated DHCP request for re0.
DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 1
DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 1
DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 1
DHCPOFFER from 192.168.10.1
DHCPREQUEST on re0 to 255.255.255.255 port 67
DHCPACK from 192.168.10.1
bound to 192.168.10.4 -- renewal in 21600 seconds.
IPv6 address for re0? (or 'rtsol' or 'none') [none]
No more interfaces to initialize.
DNS domain name? (e.g. 'bar.com') [parnet.bwc]
DNS nameserver? (IP address or 'none') [195.130.130.129 195.130.131.1]
Use the nameserver now? [yes]
Default IPv4 route? (IPv4 address, 'dhcp' or 'none') [dhcp]
Edit hosts with ed? [no]
Do you want to do any manual network configuration? [no]
Password for root account? (will not echo)
Password for root account? (again)
Let's install the sets!
Location of sets? (cd disk ftp http or 'done') [cd] http
HTTP/FTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none]
Display the list of known http servers? [yes] yes
Getting the list from 129.128.5.191 (ftp.openbsd.org)...done.
...
Server? (IP address, hostname, list#, 'done' or '?') 7
Using ftp.scarlet.be/pub/openbsd Belgium
Server? (IP address, hostname, list#, 'done' or '?') [ftp.scarlet.be]
Server directory? [pub/openbsd/3.8/i386] pub/openbsd/snapshots/i386
...
Set name? (or 'done') [bsd.mp] done
Ready to install sets? [yes] yes
Getting bsd ...
100% |**************************************************| 5323 KB 00:17
Getting bsd.rd ...
100% |**************************************************| 4616 KB 00:16
Getting base38.tgz ...
100% |**************************************************| 39471 KB 01:53
Getting etc38.tgz ...
100% |**************************************************| 1125 KB 00:03
Getting misc38.tgz ...
100% |**************************************************| 2222 KB 00:06
Getting comp38.tgz ...
100% |**************************************************| 73487 KB 03:04
Getting man38.tgz ...
100% |**************************************************| 7253 KB 00:17
Getting xbase38.tgz ...
100% |**************************************************| 10519 KB 00:26
Getting xetc38.tgz ...
100% |**************************************************| 94732 00:00
Getting xshare38.tgz ...
100% |**************************************************| 2064 KB 00:05
Getting xfont38.tgz ...
100% |**************************************************| 32438 KB 01:07
Getting xserv38.tgz ...
100% |**************************************************| 18991 KB 00:42
Location of sets? (cd disk ftp http or 'done') [cd] done
Start sshd(8) by default? [yes] y
Start ntpd(8) by default? [no] n
Do you expect to run the X Window System? [yes] y
Change the default console to com0? [no] y
Available speeds are: 9600 19200 38400 57600 115200.
Which one should com0 use? (or 'done') [9600]
Saving configuration files...done.
Generating initial host.random file...done.
What timezone are you in? ('?' for list) [Canada/Mountain] Europe/Brussels
Setting local timezone to 'Europe/Brussels'...done.
Making all device nodes...done.
Installing boot block...
boot: /mnt/boot
proto: /usr/mdec/biosboot
device: /dev/rwd2c
/usr/mdec/biosboot: entry point 0
proto bootblock size 512
/mnt/boot is 3 blocks x 16384 bytes
fs block shift 2; part offset 114688035; inode block 208, offset 4648
using MBR partition 1: type 166 (0xa6) offset 114688035 (0x6d60023)
done.
CONGRATULATIONS! Your OpenBSD install has been successfully completed!
To boot the new system, enter halt at the command prompt. Once the
system has halted, reset the machine and boot from the disk.
# reboot
syncing disks... done
uvm_fault(0xd7be8370, 0x0, 0, 1) -> e
fatal page fault in supervisor mode
trap type 6 code 0 eip d0178b5b cs 8 eflags 10286 cr2 bac cpl b0
panic: trap type 6, code=0, pc=d0178b5b
dumping to dev 1101, offset 0
dump error 19
<REBOOTS AUTOMATICALLY>
***********************
*** END INSTALL LOG ***
***********************
And here's what happens after the first time the system is booted,
followed by a reboot. The output of "trace", "ps", and "show registers"
is included.
****************************
*** BEGIN FIRST BOOT LOG ***
****************************
>> OpenBSD/i386 BOOT 2.10
boot>
booting hd0a:/bsd: 4959464+868264 [52+255136+236474]=0x606e94
entry point at 0x100120
m
[ using 492036 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.8-current (GENERIC) #579: Fri Jan 13 15:10:52 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2500+ ("AuthenticAMD" 686-class, 512KB L2 cache)
1.84 GH
z
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
X,FXSR,SSE
cpu0: AMD Powernow: TS
real mem = 1073262592 (1048108K)
avail mem = 972627968 (949832K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(2d) BIOS, date 09/14/04, BIOS32 rev. 0 @ 0xfb470
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 5 7 10 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x4800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Nvidia nForce2 PCI" rev 0xa2
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 1 not configured
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 2 not configured
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 3 not configured
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 4 not configured
"Nvidia nForce2" rev 0xa2 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "Nvidia nForce2 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "Nvidia nForce2 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
asbtm0 at iic1 addr 0x2d
iic1: addr 0x2e 20=33 21=32 22=00 23=00 24=00 25=00 26=5c 27=33 28=00
29=00 2a=0
0 2c=00 2e=00 2f=00 30=00 31=00 32=00 33=00 34=00 35=00 36=00 37=50
38=4b 39=50
3a=4b 3b=00 3c=00 3d=00 3e=00 3f=00 40=0d 41=80 42=00 43=00 44=00 45=80
4c=a3 4d
=5c 4e=70 50=06 51=04 52=03 53=6e 54=7f 55=4b 56=46 57=4b 58=46 59=00
5a=fa 5b=b
c 85=00 86=18 e0=c9 e1=02 e2=3a e3=71 e4=39 e5=38 e6=37 e7=33 f1=2e
f2=00 f4=00
f5=63 f6=00 f8=00 f9=00 fb=00 fc=00 fd=02
lm1 at iic1 addr 0x2f: W83791D
ohci0 at pci0 dev 2 function 0 "Nvidia nForce2 USB" rev 0xa3: irq 7,
version 1.0
, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 1 "Nvidia nForce2 USB" rev 0xa3: irq 5,
version 1.0
, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Nvidia OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 2 function 2 "Nvidia nForce2 USB" rev 0xa3: irq 12
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Nvidia EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
"Nvidia nForce2 Audio" rev 0xa2 at pci0 dev 5 function 0 not configured
auich0 at pci0 dev 6 function 0 "Nvidia nForce2 AC97" rev 0xa1: irq 11,
nForce2
AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
ppb0 at pci0 dev 8 function 0 "Nvidia nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
ath0 at pci1 dev 8 function 0 "Atheros AR5212" rev 0x01: irq 12
ath0: AR5213 7.9 phy 4.5 rf2112a 5.6: RF radio not supported
re0 at pci1 dev 9 function 0 "US Robotics USR997902" rev 0x10: irq 10,
address 0
0:c0:49:f4:23:04
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
pciide0 at pci1 dev 10 function 0 "CMD Technology SiI3114 SATA" rev
0x02: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide0: port 2: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 2 drive 0: <WDC WD1600JS-88MHB0>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:2:0): using BIOS timings, Ultra-DMA mode 6
pciide0: port 3: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 3 drive 0: <WDC WD1600JD-00HBB0>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide0:3:0): using BIOS timings, Ultra-DMA mode 6
pciide1 at pci0 dev 9 function 0 "Nvidia nForce2 IDE" rev 0xa2: DMA,
channel 0 c
onfigured to compatibility, channel 1 configured to compatibility
wd2 at pciide1 channel 0 drive 0: <ST380023A>
wd2: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd2(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, DVDR PX-708A, 1.07> SCSI0
5/cdrom remova
ble
atapiscsi1 at pciide1 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <PIONEER, DVD-ROM DVD-119, 1.05> SCSI0
5/cdrom rem
ovable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 4
"Nvidia nForce2 FireWire" rev 0xa3 at pci0 dev 13 function 0 not configured
ppb1 at pci0 dev 30 function 0 "Nvidia nForce2 AGP" rev 0xa2
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ATI Radeon 9500/9700" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon 9500/9700 Sec" rev 0x00 at pci2 dev 0 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fbe5 netmask ffe5 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
ugen0 at uhub1 port 1
ugen0: OmniVision OV511, rev 1.00/1.00, addr 2
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
1.10/3.00,
addr 3, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x81
wd1: no disk label
dkcsum: wd1 matches BIOS drive 0x82
dkcsum: wd2 matches BIOS drive 0x80
root on wd2a
rootdev=0x20 rrootdev=0x320 rawdev=0x322
Automatic boot in progress: starting file system checks.
/dev/rwd2a: file system is clean; not checking
/dev/rwd2g: file system is clean; not checking
/dev/rwd2e: file system is clean; not checking
/dev/rwd2f: file system is clean; not checking
/dev/rwd2d: file system is clean; not checking
setting tty flags
kbd: keyboard mapping set to be
machdep.allowaperture: 0 -> 2
starting network
DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 1
DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 1
DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 2
DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 4
DHCPOFFER from 192.168.10.1
DHCPREQUEST on re0 to 255.255.255.255 port 67
DHCPACK from 192.168.10.1
bound to 192.168.10.4 -- renewal in 21600 seconds.
starting system logger
starting initial daemons:.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
ssh-keygen: generating new DSA host key... done.
ssh-keygen: generating new RSA host key... done.
ssh-keygen: generating new RSA1 host key... done.
openssl: generating new isakmpd RSA key... done.
starting network daemons: sendmail inetd sshd.
starting local daemons:.
standard daemons: cron.
Sun Jan 15 02:51:28 CET 2006
OpenBSD/i386 (dessler.parnet.bwc) (tty00)
login: root
Password:
Login incorrect
login: root
Password:
Last unsuccessful login: Sun Jan 15 02:51:38 on tty00
OpenBSD 3.8-current (GENERIC) #579: Fri Jan 13 15:10:52 MST 2006
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
You have mail.
Terminal type? [vt220]
# reboot
/etc/rc.shutdown in progress...
/etc/rc.shutdown complete.
syncing disks... done
uvm_fault(0xd7cfadc0, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at ath_stop+0xe: movl 0xbac(%esi),%edi
ddb> trace
ath_stop(d1797030,0,0,15) at ath_stop+0xe
dohooks(d05a49c0,1,e9695ef0,d0346e4c) at dohooks+0x5e
boot(0,0,43c9aab6,0,d05a3e18) at boot+0x55
sys_reboot(d7cf5e14,e9695f68,e9695f58,ffffffff,2d) at sys_reboot+0x26
syscall() at syscall+0x2ea
--- syscall (number 55) ---
0x1c000995:
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
*21161 1 21161 0 7 0x4006 reboot
15 0 0 0 3 0x100204 crypto_wa crypto
14 0 0 0 3 0x100204 aiodoned aiodoned
13 0 0 0 3 0x100204 syncer update
12 0 0 0 3 0x100204 cleaner cleaner
11 0 0 0 3 0x100204 reaper reaper
10 0 0 0 3 0x100204 pgdaemon pagedaemon
9 0 0 0 3 0x100204 pftm pfpurge
8 0 0 0 3 0x100204 usbevt usb2
7 0 0 0 3 0x100204 usbevt usb1
6 0 0 0 3 0x100204 usbtsk usbtask
5 0 0 0 3 0x100204 usbevt usb0
4 0 0 0 3 0x100204 timeout sensors
3 0 0 0 3 0x100204 apmev apm0
2 0 0 0 3 0x100204 kmalloc kmthread
1 0 1 0 3 0x4084 wait init
0 -1 0 0 3 0x80204 scheduler swapper
ddb> show registers
ds 0x10
es 0x10
fs 0x58
gs 0x10
edi 0x1
esi 0
ebp 0xe9695ea0
ebx 0xd1797030 end+0x1108280
edx 0xd176fde0 end+0x10e1030
ecx 0xe9695cd0
eax 0xd05a49c0 shutdownhook_list
eip 0xd019bf16 ath_stop+0xe
cs 0x8
eflags 0x10292
esp 0xe9695e7c
ss 0xe9690010
ath_stop+0xe: movl 0xbac(%esi),%edi
ddb>
Kind regards,
Paulo
