Thanks Theo. Sorry for not providing the details...
Anyway here it is:
[x220@x220.thinkpad.local:~]$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
index 4 priority 0 llprio 3
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
em0: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST>
mtu 1500
lladdr f0:de:f1:d1:94:39
index 1 priority 0 llprio 3
trunk: trunkdev trunk0
media: Ethernet autoselect (none)
status: no carrier
iwn0: flags=8947<UP,BROADCAST,DEBUG,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu
1500
lladdr f0:de:f1:d1:94:39
index 2 priority 4 llprio 3
trunk: trunkdev trunk0
groups: wlan
media: IEEE802.11 autoselect (HT-MCS7 mode 11n)
status: active
ieee80211: nwid iPhone-4408 chan 1 bssid e2:ac:cb:eb:b5:e9 -51dBm
wpakey <not displayed> wpaprotos wpa1,wpa2 wpaakms psk wpaciphers tkip,ccmp
wpagroupcipher tkip
enc0: flags=0<>
index 3 priority 0 llprio 3
groups: enc
status: active
vether0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr fe:e1:ba:d0:2e:eb
index 5 priority 0 llprio 3
groups: vether
media: Ethernet autoselect
status: active
inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
trunk0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr f0:de:f1:d1:94:39
index 6 priority 0 llprio 3
trunk: trunkproto failover
trunkport iwn0 active
trunkport em0 master
groups: trunk egress
media: Ethernet autoselect
status: active
inet 172.20.10.12 netmask 0xfffffff0 broadcast 172.20.10.15
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33144
index 7 priority 0 llprio 3
groups: pflog
bridge0: flags=41<UP,RUNNING>
description: switch1-my_switch
index 8 llprio 3
groups: bridge
priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto
rstp
vether0 flags=3<LEARNING,DISCOVER>
port 5 ifpriority 0 ifcost 0
[x220@x220.thinkpad.local:~]$
[x220@x220.thinkpad.local:~]$ cat /etc/hostname.trunk0
trunkproto failover trunkport em0
trunkport iwn0
dhcp
[x220@x220.thinkpad.local:~]$ cat /etc/dhclient.conf
# $OpenBSD: dhclient.conf,v 1.1 2014/08/29 18:05:39 ajacoutot Exp $
#
# DHCP Client Configuration
#
# See dhclient.conf(5) for possible contents of this file.
# When empty default values are used:
#
# Example:
#
# send dhcp-lease-time 3600;
# send host-name "myhost";
# supersede host-name "myhost";
# supersede domain-name "my.domain";
# request subnet-mask, broadcast-address, time-offset, routers,
# domain-name, domain-name-servers, host-name, lpr-servers,
ntp-servers;
# require subnet-mask, domain-name-servers, routers;
#ignore domain-name;
supersede domain-name-servers 8.8.8.8, 8.8.4.4;
[x220@x220.thinkpad.local:~]$
dmesg:
OpenBSD 6.0-current (GENERIC.MP) #0: Tue Nov 29 12:57:31 MST 2016
bu...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 8451125248 (8059MB)
avail mem = 8190447616 (7811MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (64 entries)
bios0: vendor LENOVO version "8DET69WW (1.39 )" date 07/18/2013
bios0: LENOVO 4291G36
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF!
TCPA SSDT SSDT DMAR UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4)
EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 797.52 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 797.42 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 797.41 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 797.41 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus -1 (EXP7)
acpicpu0 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414),
C1(1000@1 halt), PSS
acpicpu1 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414),
C1(1000@1 halt), PSS
acpicpu2 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414),
C1(1000@1 halt), PSS
acpicpu3 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414),
C1(1000@1 halt), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"PNP0303" at acpi0 not configured
"LEN0020" at acpi0 not configured
"SMO1200" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1175" serial 11492 type LION oem "SANYO"
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 797 MHz: speeds: 2501, 2500, 2200, 2000,
1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
f0:de:f1:d1:94:39
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: msi,
MIMO 1T2R, BGS, address 74:e5:0b:c6:3c:c8
ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 13
sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST500LT012-9WS14, 0001> SCSI3
0/direct fixed naa.5000c5005b6a99d0
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int
18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony
Electronics Co., Ltd. Integrated Camera" rev 2.00/8.54 addr 3
video0 at uvideo0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/22.01 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhidev1 at uhub3 port 2 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/22.01 addr 3
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 476936MB, 512 bytes/sector, 976766528 sectors
root on sd1a (19b026ff4a75aa15.a) swap on sd1b dump on sd1b
Regards,
Glenn
On Wed, Nov 30, 2016 at 11:11 AM, Theo de Raadt <dera...@openbsd.org> wrote:
> Whatever your problem is, misc@ is not the place for you to reach out to.
>
> You have a local configurationm problem. You are in control of it,
> you have the details which are not provided. misc is not a "I fucked
> up" or "my network provider fucked up" diagnostics list so HELP HELP HELP
> me email list.
>
> So find some other buddies.
>
> Essentially you are asking for free work to be done to help your
> network when you don't even supply the source IP address because you
> want privacy but you still want hints for free, like WTF. That's just
> plain rude, and people can google your name and find out who you work
> for in the past or future and judge you. Be respectful of what you
> get for free, right?
>
> > Hi,
> >
> > The output of nslookup and dig when using rebound are like these:
> >
> > [x220@x220.thinkpad.local] $ nslookup www.openbsd.org
> > ;; reply from unexpected source: 127.0.0.1#54, expected 8.8.8.8#53
> > ;; reply from unexpected source: 127.0.0.1#54, expected 8.8.4.4#53
> > ;; reply from unexpected source: 127.0.0.1#54, expected 8.8.8.8#53
> > ;; reply from unexpected source: 127.0.0.1#54, expected 8.8.4.4#53
> > ;; reply from unexpected source: 127.0.0.1#54, expected 8.8.8.8#53
> > ;; reply from unexpected source: 127.0.0.1#54, expected 8.8.4.4#53
> > ;; connection timed out; no servers could be reached
> >
> > [x220@x220.thinkpad.local] $ dig www.openbsd.org
> > ;; reply from unexpected source: 127.0.0.1#54, expected 8.8.8.8#53
> > ;; reply from unexpected source: 127.0.0.1#54, expected 8.8.4.4#53
> > ;; reply from unexpected source: 127.0.0.1#54, expected 8.8.8.8#53
> > ;; reply from unexpected source: 127.0.0.1#54, expected 8.8.4.4#53
> > ;; reply from unexpected source: 127.0.0.1#54, expected 8.8.8.8#53
> > ;; reply from unexpected source: 127.0.0.1#54, expected 8.8.4.4#53
> >
> > ; <<>> DiG 9.4.2-P2 <<>> www.openbsd.org
> > ;; global options: printcmd
> > ;; connection timed out; no servers could be reached
> >
> > My network is working, I can browse and send this email; is this the
> > expected output when using rebound?
> >
> > Regards
> > Glenn
