On Tue, Nov 22, 2016 at 12:06:30PM -0800, Bryan Vyhmeister wrote: > On Tue, Nov 22, 2016 at 06:14:28PM +0100, Ingo Feinerer wrote: > > --8<------------------------------------------------------------------------- > > umb0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > index 5 priority 0 llprio 3 > > roaming disabled registration home network > > state up cell-class custom rssi -69dBm speed 5.5Mps up 20.0Mps down > > SIM initialized PIN valid > > subscriber-id 012345678901234 ICC-id 0123456789012345689 provider 3 > > AT > > device KRD 131 30/123 - R1A IMEI 012345689012345 firmware R3C11 > > (Pro), R4A10 (App) > > APN drei.at > > dns 213.94.78.17 213.94.78.16 > > status: active > > inet 10.72.61.158 --> 10.72.61.155 netmask 0xfffffff8 > > --8<------------------------------------------------------------------------- > > Due to some conflicts with umb(4) and MP safe work going on, a default > route is not automatically created for a umb(4) connection. You have to > do it manually like the following for your example above: > > route add -ifp umb0 default 10.72.61.155 > > I created a shell script to set this up.
Thanks for the pointer. Indeed, it works for me when an appropriate (default) route is manually added and the listed DNS entries are manually set in /etc/resolv.conf. Best regards, Ingo
