Yes, I boot from USB and want to use the whole disk. But I don´t even get to the installer or into a shell. The problem occurs during boot from install60.fs
2016-11-17 23:42 GMT+01:00 emtee <nick.smith....@gmail.com>: > Try this: > > Assuming you are installing from a USB drive and assuming further the > whole disk will be used for Openbsd. > > Boot from the USB, > > Choose (s)hell option, we'll prepare the disk with a EFI system partition. > > fdisk -i -b 960 sd0 > > > Step 2 > > - Run the install all the way to the Openbsd option at the fdisk question. > > -in the disklabel editor partition the disk as usual, but leave the i > partition untouched. > > Step3 > > Finish the installation but don't reboot. > > Step 4 > > format the partition and copy the uefi bootloader in place. > > /mnt/sbin/newfs_msdos sd0i > > mount /dev/sd0i /mnt2 > > mkdir -p /mnt2/efi/boot > > cp /mnt/usr/mdec/BOOTX64.EFI /mnt2/efi/boot > > --- > > reboot, and restart. > > > > > > On 11/17/16 15:16, miraculli . wrote: >> Hello misc, >> >> I try to install OpenBSD on my Apple MacBook Pro mid 2007 (or >> MacBookPro3,1) for some time now with different -release and the >> latest -snapshot versions with no success. The bootloader shows up and >> tries to launch bsd.rd: >> >> >> probing: pc0 mem [572K 64K 3053M 13M 60K 24K 76K 1024M] >> disk: hd0 hd1* hd2* >>>> OpenBSD/amd64 BOOTX64 3.30 >> boot> >> cannot boot hd0a:/etc/random.seed: No such file or directory >> booting hd0a:/bsd: 3356852+1412368+2413568+0+598016=0x76d238 >> entry point at 0xf001000 [7205c766, 34000004, 24448b12, f4c0a304] >> >> >> After printing this lines it takes several seconds and then it reboots. >> >> FreeBSD-11 is booting well on this device so I attached the dmesg >> output from there, maybe it is helpful. >> >> Thanks in advance >> Thomas >> Copyright (c) 1992-2016 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 11.0-RELEASE-p1 #0 r306420: Thu Sep 29 01:43:23 UTC 2016 >> r...@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 >> FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0) >> VT(efifb): resolution 1440x900 >> CPU: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (2194.55-MHz K8-class CPU) >> Origin="GenuineIntel" Id=0x6fa Family=0x6 Model=0xf Stepping=10 >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> >> AMD Features=0x20100800<SYSCALL,NX,LM> >> AMD Features2=0x1<LAHF> >> VT-x: HLT,PAUSE >> TSC: P-state invariant, performance statistics >> real memory = 4294967296 (4096 MB) >> avail memory = 4087091200 (3897 MB) >> Event timer "LAPIC" quality 400 >> ACPI APIC Table: <APPLE Apple00> >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> FreeBSD/SMP: 1 package(s) x 2 core(s) >> random: unblocking device. >> ioapic0: Changing APIC ID to 1 >> ioapic0 <Version 2.0> irqs 0-23 on motherboard >> random: entropy device external interface >> kbd0 at kbdmux0 >> netmap: loaded module >> module_register_init: MOD_LOAD (vesa, 0xffffffff8101c950, 0) error 19 >> cryptosoft0: <software crypto> on motherboard >> acpi0: <APPLE Apple00> on motherboard >> acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0 >> acpi0: Power Button (fixed) >> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 >> Timecounter "HPET" frequency 14318180 Hz quality 950 >> Event timer "HPET" frequency 14318180 Hz quality 450 >> Event timer "HPET1" frequency 14318180 Hz quality 440 >> Event timer "HPET2" frequency 14318180 Hz quality 440 >> cpu0: <ACPI CPU> on acpi0 >> cpu1: <ACPI CPU> on acpi0 >> atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 >> atrtc0: Warning: Couldn't map I/O. >> Event timer "RTC" frequency 32768 Hz quality 0 >> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> Event timer "i8254" frequency 1193182 Hz quality 100 >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >> acpi_acad0: <AC Adapter> on acpi0 >> acpi_lid0: <Control Method Lid Switch> on acpi0 >> acpi_button0: <Power Button> on acpi0 >> acpi_button1: <Sleep Button> on acpi0 >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pcib0: _OSC returned error 0x10 >> pcib0: could not evaluate _ADR - AE_NOT_FOUND >> pci0: <ACPI PCI bus> on pcib0 >> CPU0: local APIC error 0x80 >> CPU0: local APIC error 0x80 >> CPU0: local APIC error 0x80 >> CPU0: local APIC error 0x80 >> CPU0: local APIC error 0x80 >> CPU0: local APIC error 0x80 >> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 >> pcib1: [GIANT-LOCKED] >> pci1: <ACPI PCI bus> on pcib1 >> vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xd2000000-0xd2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff at device 0.0 on pci1 >> uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x60c0-0x60df at device 26.0 on pci0 >> uhci0: LegSup = 0x3000 >> usbus0 on uhci0 >> uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x60a0-0x60bf at device 26.1 on pci0 >> usbus1 on uhci1 >> ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xdb504c00-0xdb504fff at device 26.7 on pci0 >> usbus2: EHCI version 1.0 >> usbus2 on ehci0 >> hdac0: <Intel 82801H HDA Controller> mem 0xdb500000-0xdb503fff at device 27.0 on pci0 >> pcib2: <PCI-PCI bridge> at device 28.0 on pci0 >> pcib2: [GIANT-LOCKED] >> pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 >> pcib3: [GIANT-LOCKED] >> pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0 >> pcib4: [GIANT-LOCKED] >> pci2: <ACPI PCI bus> on pcib4 >> ath0: <Atheros 5418> mem 0xd7300000-0xd730ffff at device 0.0 on pci2 >> ath0: [HT] enabling HT modes >> ath0: [HT] RTS aggregates limited to 8 KiB >> ath0: [HT] 2 RX streams; 2 TX streams >> ath0: AR5418 mac 12.10 RF5133 phy 8.1 >> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 >> pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0 >> pcib5: [GIANT-LOCKED] >> pci3: <ACPI PCI bus> on pcib5 >> mskc0: <Marvell Yukon 88E8058 Gigabit Ethernet> port 0x3000-0x30ff mem 0xd7200000-0xd7203fff at device 0.0 on pci3 >> msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 >> msk0: Using defaults for TSO: 65518/35/2048 >> msk0: Ethernet address: 00:1b:63:9f:dc:af >> miibus0: <MII bus> on msk0 >> e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 >> e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >> uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6080-0x609f at device 29.0 on pci0 >> usbus3 on uhci2 >> uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6060-0x607f at device 29.1 on pci0 >> usbus4 on uhci3 >> uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6040-0x605f at device 29.2 on pci0 >> usbus5 on uhci4 >> ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xdb504800-0xdb504bff at device 29.7 on pci0 >> usbus6: EHCI version 1.0 >> usbus6 on ehci1 >> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >> pci4: <ACPI PCI bus> on pcib6 >> pci4: <serial bus, FireWire> at device 3.0 (no driver attached) >> isab0: <PCI-ISA bridge> at device 31.0 on pci0 >> isa0: <ISA bus> on isab0 >> atapci0: <Intel ICH8M UDMA100 controller> port 0x6108-0x610f,0x611c-0x611f,0x6100-0x6107,0x6118-0x611b,0x60e0-0x60ef at device 31.1 on pci0 >> ata2: <ATA channel> at channel 0 on atapci0 >> ahci0: <Intel ICH8M AHCI SATA controller> port 0x60f8-0x60ff,0x6114-0x6117,0x60f0-0x60f7,0x6110-0x6113,0x6020-0x603f mem 0xdb504000-0xdb5047ff at device 31.2 on pci0 >> ahci0: AHCI v1.10 with 3 1.5Gbps ports, Port Multiplier not supported >> ahcich0: <AHCI channel> at channel 0 on ahci0 >> ahciem0: <AHCI enclosure management bridge> on ahci0 >> battery0: <ACPI Control Method Battery> on acpi0 >> ppc0: cannot reserve I/O port range >> est0: <Enhanced SpeedStep Frequency Control> on cpu0 >> est1: <Enhanced SpeedStep Frequency Control> on cpu1 >> Timecounters tick every 1.000 msec >> nvme cam probe device init >> hdacc0: <Realtek ALC889A HDA CODEC> at cad 0 on hdac0 >> hdaa0: <Realtek ALC889A Audio Function Group> at nid 1 on hdacc0 >> pcm0: <Realtek ALC889A (Internal Analog)> at nid 20 and 24 on hdaa0 >> pcm1: <Realtek ALC889A (Rear Analog)> at nid 21 and 26 on hdaa0 >> pcm2: <Realtek ALC889A (Rear Digital)> at nid 30 and 31 on hdaa0 >> usbus0: 12Mbps Full Speed USB v1.0 >> usbus1: 12Mbps Full Speed USB v1.0 >> ugen0.1: <Intel> at usbus0 >> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 >> ugen1.1: <Intel> at usbus1 >> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >> usbus2: 480Mbps High Speed USB v2.0 >> usbus3: 12Mbps Full Speed USB v1.0 >> ugen2.1: <Intel> at usbus2 >> uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 >> ugen3.1: <Intel> at usbus3 >> uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 >> usbus4: 12Mbps Full Speed USB v1.0 >> usbus5: 12Mbps Full Speed USB v1.0 >> ugen4.1: <Intel> at usbus4 >> uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 >> ugen5.1: <Intel> at usbus5 >> uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 >> usbus6: 480Mbps High Speed USB v2.0 >> ugen6.1: <Intel> at usbus6 >> uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 >> ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 >> ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device >> ses0: SEMB SES Device >> ada0 at ata2 bus 0 scbus0 target 0 lun 0 >> ada0: <SanDisk SDSSDP128G 3.2.0> ACS-2 ATA SATA 3.x device >> ada0: Serial Number 145271400667 >> ada0: 100.000MB/s transfers (UDMA5, PIO 512bytes) >> ada0: 120196MB (246162672 512 byte sectors) >> uhub0: 2 ports with 2 removable, self powered >> ada1 at ahcich0 bus 0 scbus1 target 0 lun 0 >> uhub1: 2 ports with 2 removable, self powered >> ada1: <SanDisk SDSSDP128G 3.2.0> ACS-2 ATA SATA 3.x device >> ada1: Serial Number 145271401638 >> ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 512bytes) >> ada1: Command Queueing enabled >> uhub3: 2 ports with 2 removable, self powered >> ada1: 120196MB (246162672 512 byte sectors) >> SMP: AP CPU #1 Launched! >> Timecounter "TSC-low" frequency 1097276653 Hz quality 1000 >> Trying to mount root from ufs:/dev/ada0p2 [rw]... >> uhub4: 2 ports with 2 removable, self powered >> uhub5: 2 ports with 2 removable, self powered >> uhub2: 4 ports with 4 removable, self powered >> wlan0: Ethernet address: 00:1e:52:71:c8:3c >> msk0: link state changed to DOWN >> uhub6: 6 ports with 6 removable, self powered >> ugen6.2: <Apple Inc.> at usbus6 >> ugen0.2: <vendor 0x05ac> at usbus0 >> ukbd0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus0 >> kbd1 at ukbd0 >> ugen5.2: <Apple Computer, Inc.> at usbus5 >> ugen5.3: <Apple Computer> at usbus5 >> ukbd1: <Apple Internal Keyboard> on usbus5 >> kbd2 at ukbd1 >> ums0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus0 >> uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 2> on usbus5 >> ums0: 5 buttons and [XY] coordinates ID=0 >> atp0: <Touchpad> on usbus5 >> uhid1: <Apple Internal Keyboard> on usbus5 >> wlan0: link state changed to UP >> wlan0: link state changed to DOWN >> wlan0: link state changed to UP >> pid 1075 (dbus-send), uid 1001: exited on signal 6 >> pid 1086 (dbus-send), uid 1001: exited on signal 6 >> pid 1099 (dbus-send), uid 1001: exited on signal 6 >> > -- +49.179.1448024 Karl-Kunger-Straße 68 D - 12435 Berlin
