Hi,
I am trying to setup an iscsi setup but the iscsid daemon is exiting
very early.
The target is also an OpenBSD machine running netbsd-iscsi-target.
Its config is quite simple:
$ rcctl get iscsi_target flags
-p 1999
$ grep -v '^#' /etc/iscsi/targets
extent0 /home/data/targets/target0 0 6GB
target0 rw extent0 x.x.x.x/32
On the initiator, I have:
$ cat /etc/iscsi.conf
target1="y.y.y.y"
target "disk1" {
targetaddr $target1 inet port "1999"
targetname "iqn.1994-04.org.netbsd.iscsi-target:target:0"
}
# iscsid -dv
startup
[ then I issue 'iscsictl reload' in another terminal and i get ... ]
session_fsm[disk1]: INIT ev start timeout 0
sess_fsm[disk1]: INIT ev start
new connection to 158.167.97.39:1999
conn_fsm[disk1]: FREE ev connect
conn_fsm[disk1]: new state XPT_WAIT
sess_fsm[disk1]: new state FREE
sess_fsm: done
conn_fsm[disk1]: XPT_WAIT ev connected
conn_fsm[disk1]: new state IN_LOGIN
conn_parse_kvp: AuthMethod = None
conn_parse_kvp: TargetPortalGroupTag = 1
SET_NUM: TargetPortalGroupTag = 1
conn_parse_kvp: MaxConnections = 1
SET_NUM: MaxConnections = 1
conn_parse_kvp: MaxRecvDataSegmentLength = 65536
SET_NUM: MaxRecvDataSegmentLength = 65536
conn_fsm[disk1]: IN_LOGIN ev logged in
session_fsm[disk1]: FREE ev connection logged in timeout 0
conn_fsm[disk1]: new state LOGGED_IN
sess_fsm[disk1]: FREE ev connection logged in
conn_fsm[disk1]: new state LOGGED_IN
[0/1939]
sess_fsm[disk1]: FREE ev connection logged in
sess_fsm[disk1]: new state LOGGED_IN
sess_fsm: done
ISCSI_OP_TEXT_RESPONSE
TargetName => iqn.1994-04.org.netbsd.iscsi-target:target0
TargetAddress => x.x.x.x:1999,1
session[disk1] going down
conn_fsm[disk1]: LOGGED_IN ev logout
conn_fsm[disk1]: new state IN_LOGOUT
initiator_logout_cb: response 0, Time2Wait 0, Time2Retain 0
conn_fsm[disk1]: IN_LOGOUT ev logged out
conn_fsm[disk1]: new state FREE
session_fsm[disk1]: LOGGED_IN ev session closed timeout 0
conn_fsm[disk1]: FREE ev closed
c_do_fail
session_fsm[disk1]: LOGGED_IN ev connection fail timeout 0
conn_fsm[disk1]: new state FREE
sess_fsm[disk1]: LOGGED_IN ev session closed
conn_free
sess_fsm[disk1]: new state FREE
sess_fsm: done
sess_fsm[disk1]: FREE ev connection fail
It can only be attributable to human error.
fatal: sess_fsm: action failed
Is it normal the iscsid daemon does exit so early? Is it a problem with
my config?
Thanks a lot,
Best
--
Olivier Cherrier
mailto:o...@symacx.com
