On Mon, Sep 19, 2016 at 03:00:43PM -0500, Edgar Pettijohn wrote:
> On 16-09-19 19:56:31, Kapfhammer, Stefan wrote:
> > Hello Edgar,
> >
> > I have no Soekris, but Apu2 is also connected
> > with a serial cable.
> >
> > When cable is plugged in the controlling pc
> > before booting, it is to be found as /dev/cuaU???0.
> >
> > When I plug it in after the boot completed, it is to be
> > found as /dev/cuaU3. (0/1/2 is normally int. 3G modem)
> >
> > Hope this helps debugging. Feedback would be fine.
>
> Thanks for the reply. It has always worked with:
>
> # cu -l cuaU0
>
> when it stopped working I tried cuaU{1,2} with same result.
>
> I suppose I may as well provide some dmesg porn.
> >
> >
> > Freundliche Gr????e / Regards
> > -stefan kapfhammer
> > Originalnachricht
> > Von: Edgar Pettijohn
> > Gesendet: Montag, 19. September 2016 20:52
> > An: misc@openbsd.org
> > Betreff: cuaU0 problems
> >
> >
> > I use a usb serial cable to talk to my soekris router. That works with
> > 6.0 release but not current. I was hoping to find commits related to it
> > and roll back to find what broke it, but I'm not sure where to look.
> >
> > Any help is appreciated.
> >
> > Thanks,
> > --
> > Edgar Pettijohn
>
> --
> Edgar Pettijohddn
Maybe unrelated but...
> OpenBSD 6.0-current (GENERIC.MP) #2139: Sun Sep 18 23:16:59 MDT 2016
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
^^^^ ^^^^
is this intentional?
Anyway, are the hubs self-powered? Does it work if connected directly to
the laptop? Maybe the dongle isn't getting enough juice.
Zé
> cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel" 686-class) 798
> MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,LAHF,PERF,ITSC,SENSOR,ARAT
> real mem = 3662811136 (3493MB)
> avail mem = 3580022784 (3414MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 03/26/12, BIOS32 rev. 0 @ 0xfc200, SMBIOS rev. 2.6 @
> 0xdae9c000 (64 entries)
> bios0: vendor LENOVO version "83ET69WW (1.39 )" date 03/26/2012
> bios0: LENOVO 42368J2
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA
> SSDT SSDT UEFI UEFI UEFI
> acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EHC1(S3) EHC2(S3)
> HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel" 686-class)
> 2.50 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel" 686-class)
> 2.50 GHz
> cpu2:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel" 686-class)
> 2.50 GHz
> cpu3:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,LAHF,PERF,ITSC,SENSOR,ARAT
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 2 (EXP1)
> acpiprt3 at acpi0: bus 3 (EXP2)
> acpiprt4 at acpi0: bus 5 (EXP4)
> acpiprt5 at acpi0: bus 13 (EXP5)
> acpicpu0 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1
> halt), PSS
> acpicpu1 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1
> halt), PSS
> acpicpu2 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1
> halt), PSS
> acpicpu3 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1
> halt), PSS
> acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
> acpitz0 at acpi0: critical temperature is 98 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> "PNP0303" at acpi0 not configured
> "LEN0015" at acpi0 not configured
> "SMO1200" at acpi0 not configured
> acpibat0 at acpi0: BAT0 model "42T4751" serial 1690 type LION oem "SANYO"
> acpiac0 at acpi0: AC unit offline
> acpithinkpad0 at acpi0
> acpithinkpad0: volume: 0x0
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpivideo0 at acpi0: VID_
> acpivout at acpivideo0 not configured
> acpivideo1 at acpi0: VID_
> bios0: ROM list: 0xc0000/0x10000!
> cpu0: Enhanced SpeedStep 2492 MHz: speeds: 2501, 2500, 2200, 2000, 1800,
> 1600, 1400, 1200, 1000, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 1600x900
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
> com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
> com4: probed fifo depth: 0 bytes
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> 00:21:cc:bc:f0:47
> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 16
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 17
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x3e: msi,
> MIMO 3T3R, MoW, address 24:77:03:5f:12:38
> ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 19
> pci3 at ppb2 bus 5
> ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 16
> pci4 at ppb3 bus 13
> sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x08: apic 2 int 16
> sdhc0: SDHC 3.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
> ahci0: port 0: 3.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS72323, EC2Z> SCSI3 0/direct
> fixed naa.5000cca6d4cb8073
> sd0: 305245MB, 512 bytes/sector, 625142448 sectors
> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT50N, LT20> ATAPI 5/cdrom
> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics touchpad, firmware 7.2
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> uhub2: device problem, disabling port 1
> uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
> Ltd. Integrated Camera" rev 2.00/7.52 addr 3
> video0 at uvideo0
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> uhub3: device problem, disabling port 5
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (5da61fb7942e784d.a) swap on sd0b dump on sd0b
> uhub2: device problem, disabling port 1
> umass0 at uhub2 port 1 configuration 1 interface 0 "PNY Technologies USB 2.0
> FD" rev 2.00/1.0b addr 4
> umass0: using SCSI over Bulk-Only
> scsibus4 at umass0: 2 targets, initiator 0
> sd1 at scsibus4 targ 1 lun 0: <PNY, USB 2.0 FD, 8.00> SCSI2 0/direct
> removable serial.154b0099270000002079
> sd1: 15259MB, 512 bytes/sector, 31250432 sectors
>
--
