Hi all,
I've been given a Wifi USB dongle (the one given with the LiveBox
(France Telecom ADSL access) : the Inventel UR054g (in fact, it's a
Thomson Telecom product). With my OBSD 3.8/i386 (GENERIC), it's not
recognized (in fact, as ugen0), here is the dmesg :
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 233 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 33071104 (32296K)
avail mem = 22192128 (21672K)
using 429 buffers containing 1757184 bytes (1716K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 09/07/98, BIOS32 rev. 0 @ 0xfc2c0
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
apm0: flags 20102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf01c0/96 (4 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
WARNING: can't reserve area for I/O APIC.
WARNING: can't reserve area for Local APIC.
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
cbb0 at pci0 dev 2 function 0 "Toshiba ToPIC97 CardBus" rev 0x05: irq 11
cbb1 at pci0 dev 2 function 1 "Toshiba ToPIC97 CardBus" rev 0x05: irq 11
vga1 at pci0 dev 4 function 0 "Chips and Technologies 65555" rev 0xc6
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4310MAT>
wd0: 16-sector PIO, LBA, 4126MB, 8452080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 7.5A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured
"Toshiba Fast Infrared Type O" rev 0x23 at pci0 dev 10 function 0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
audio1 at wss0
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask eb4d netmask eb4d ttymask fbcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ne3 at pcmcia0 function 0 "PCMCIA, FastEthernet, V" port 0xa300/32
ne3: address 00:10:60:f6:71:29
rl0 at cardbus1 dev 0 function 0 "Realtek, Rtl8139, \M^?": irq 11
address 00:40:f4:c3:9a:27
rlphy0 at rl0 phy 0: RTL internal phy
ugen0 at uhub0 port 1
ugen0: GlobespanVirata Cohiba 3887 rev0, rev 2.00/10.20, addr 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
pppoe0: phase establish
pppoe0: phase authenticate
pppoe0: phase network
Some tech spec can be found at :
http://www.unex.com.tw/web1/images/product/spec/UR054g.htm
Under Linux, it can works through NDISWrapper using the prisma02 driver.
Based on : http://www.inexq.co.uk/web1/english/download/search.asp#,
it use a Conexant chipset.
Can we hope to have this model supported in the next release ?
Thank you,
Best regards,
Bruno.
