after some manipulations (assign address and ping it) with the urndis
device and unplug it usb port stops work.
dmesg
OpenBSD 5.9-stable (GENERIC.MP) #0: Mon Apr 18 13:50:24 MSK 2016
r...@work.nightbbs.ru:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2056990720 (1961MB)
avail mem = 1990508544 (1898MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe9f80 (85 entries)
bios0: vendor Hewlett-Packard version "786G1 v01.08" date 08/25/2008
bios0: Hewlett-Packard HP Compaq dc7900 Small Form Factor
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET DMAR
acpi0: wakeup devices COM1(S4) COM2(S4) PCI0(S4) PEG1(S4) PEG2(S4)
IGBE(S4) PCX1(S4) PCX2(S4) PCX5(S4) PCX6(S4) HUB_(S4) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) USB5(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz, 3159.18 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz, 3158.72 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 6MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf4000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 32 (PCX1)
acpiprt4 at acpi0: bus -1 (PCX2)
acpiprt5 at acpi0: bus 48 (PCX5)
acpiprt6 at acpi0: bus -1 (PCX6)
acpiprt7 at acpi0: bus 7 (HUB_)
acpicpu0 at acpi0: !C2(500@17 mwait.3@0x10), C1(1000@1 mwait.1)
acpicpu1 at acpi0: !C2(500@17 mwait.3@0x10), C1(1000@1 mwait.1)
acpibtn0 at acpi0: PBTN
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0616492206004922
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 3159 MHz: speeds: 24333, 2000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1280x1024
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 1 com
com4 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 15 bytes
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: msi,
address 00:23:7d:4e:a2:5c
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02: msi
azalia0: codecs: Analog Devices AD1884A
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02: msi
pci1 at ppb0 bus 32
ppb1 at pci0 dev 28 function 4 "Intel 82801JD PCIE" rev 0x02: msi
pci2 at ppb1 bus 48
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci3 at ppb2 bus 7
pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801JD AHCI" rev 0x02: msi, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST3250310AS, 3.AH> SCSI3 0/direct
fixed t10.ATA_ST3250310AS_6RYG2JPT_
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus1 targ 1 lun 0: <ATAPI, DVD A DH16A6L, ZH37> ATAPI 5/cdrom
removable
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
umsm0 at uhub0 port 5 configuration 1 interface 0 "HUAWEI Technology
HUAWEI Mobile" rev 2.00/1.02 addr 2
ucom0 at umsm0
umsm1 at uhub0 port 5 configuration 1 interface 1 "HUAWEI Technology
HUAWEI Mobile" rev 2.00/1.02 addr 2
ucom1 at umsm1
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Cherry
Mikroschalter product 0x0011" rev 2.00/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/13.00 addr 2
uhidev1: iclass 3/1
ukbd1 at uhidev1: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev2 at uhub4 port 2 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/13.00 addr 2
uhidev2: iclass 3/1, 8 report ids
ums0 at uhidev2 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev2 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev2 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev2 reportid 8: input=1, output=0, feature=0
uhidev3 at uhub4 port 2 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/13.00 addr 2
uhidev3: iclass 3/0, 33 report ids
uhid3 at uhidev3 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev3 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev3 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev3 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (2cfc7c7795c390e7.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
umsm0: this device is not using CDC notify message in intr pipe.
Please send your dmesg to <b...@openbsd.org>, thanks.
umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
umsm0: this device is not using CDC notify message in intr pipe.
Please send your dmesg to <b...@openbsd.org>, thanks.
umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
uhub0: port 3 reset failed
urndis0 at uhub0 port 3 configuration 1 interface 0 "Jolla Sailfish" rev
2.00/2.28 addr 3
urndis0: using RNDIS, address 0e:11:29:bc:4a:da
urndis0 detached
ehci0: port reset timeout
uhub0: port 3 reset failed
