Hi,
I don't know if this is a problem or not, if it's with vmware or with
obsd. Here's just an observation from me when running obsd under vmware.
When I install using the floppy38.fs image I get le1 as my
ethernet-interface and install using ftp. Then I reboot using the
standard bsd-kernel I get pcn0 as my ethernet-interface. Dmesg below.
Rickard.
dmesg when running floppy38.fs:
OpenBSD 3.8 (RAMDISK) #793: Sat Sep 10 16:02:31 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ ("AuthenticAMD"
686-class, 1024KB L2 cache) 2.46 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
real mem = 267952128 (261672K)
avail mem = 240267264 (234636K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(fa) BIOS, date 07/29/05, BIOS32 rev. 0 @ 0xfd880
apm0 at bios0: Power Management spec V1.2
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd880/0x780
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xdc000/0x4000!
0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <VMware Virtual IDE Hard Drive>
wd0: 64-sector PIO, LBA, 8192MB, 16777216 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
"Intel 82371AB Power" rev 0x08 at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 15 function 0 "VMware Virtual SVGA II" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Symbios Logic 53c1030" rev 0x01 at pci0 dev 16 function 0 not configured
le1 at pci0 dev 17 function 0 "AMD 79c970 PCnet-PCI" rev 0x10: irq 11
le1: address 00:0c:29:03:8e:15
le1: 8 receive buffers, 2 transmit buffers
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f7e5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
dmesg when running bsd or bsd.rd:
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ ("AuthenticAMD"
686-class, 1024KB L2 cache) 2.46 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
cpu0: AMD Powernow: FID VID TTP TM
real mem = 267952128 (261672K)
avail mem = 237481984 (231916K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(fa) BIOS, date 07/29/05, BIOS32 rev. 0 @ 0xfd880
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd880/0x780
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xdc000/0x4000!
0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <VMware Virtual IDE Hard Drive>
wd0: 64-sector PIO, LBA, 8192MB, 16777216 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
"Intel 82371AB Power" rev 0x08 at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 15 function 0 "VMware Virtual SVGA II" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
mpt0 at pci0 dev 16 function 0 "Symbios Logic 53c1030" rev 0x01: irq 9
mpt0: IM support: 0
scsibus0 at mpt0: 16 targets
pcn0 at pci0 dev 17 function 0 "AMD 79c970 PCnet-PCI" rev 0x10,
Am79c970A, rev 0: irq 11, address 00:0c:29:03:8e:15
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e765 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
