Hi,
I'm running today's snapshot on an HP EliteBook 9480m. Everything works
great, aside from the audio. I get no sound when I plug my headphones
in, though the internal speakers work when the headphones are not
plugged in (they mute themselves when the headphones are inserted).
I'm good to test patches if anybody has any ideas that might help fix this.
Output of mixerctl -va:
inputs.dac-0:1=126,126
inputs.dac-2:3=126,126
record.adc-2:3_mute=off [ off on ]
record.adc-2:3=124,124
record.adc-0:1_mute=off [ off on ]
record.adc-0:1=124,124
inputs.mix_source=mic2 { mic2 }
inputs.mix_mic2=120,120
inputs.mix2_source=dac-0:1,mix { dac-0:1 mix }
inputs.mix3_source=dac-2:3,mix { dac-2:3 mix }
inputs.mic=85,85
outputs.spkr_source=mix3 [ mix2 mix3 ]
outputs.spkr_mute=on [ off on ]
outputs.spkr_eapd=on [ off on ]
outputs.hp_source=mix2 [ mix2 mix3 ]
outputs.hp_mute=off [ off on ]
outputs.hp_boost=off [ off on ]
outputs.hp_eapd=on [ off on ]
outputs.mic2_source=mix2 [ mix2 mix3 ]
outputs.mic2_mute=off [ off on ]
inputs.mic2=85,85
outputs.mic2_dir=input-vr80 [ none output input input-vr0 input-vr50
input-vr80 input-vr100 ]
outputs.mic2_boost=off [ off on ]
record.adc-0:1_source=mic [ mic2 mix mic ]
record.adc-2:3_source=mic2 [ mic2 mix ]
outputs.hp_sense=plugged [ unplugged plugged ]
outputs.mic2_sense=unplugged [ unplugged plugged ]
outputs.spkr_muters=hp,mic2 { hp mic2 }
outputs.master=126,126
outputs.master.mute=off [ off on ]
outputs.master.slaves=dac-0:1,dac-2:3,spkr,hp { dac-0:1 dac-2:3 spkr hp
mic2 }
record.volume=124,124
record.volume.mute=off [ off on ]
record.volume.slaves=adc-2:3,adc-0:1 { adc-2:3 adc-0:1 mic mic2 }
Two knobs change when the headphones are removed:
outputs.spkr_mute=off [ off on ]
outputs.hp_sense=unplugged [ unplugged plugged ]
output of audioctl:
name=azalia1
encodings=slinear_le:16:2:1,slinear_le:20:4:1,slinear_le:24:4:1
properties=full_duplex,independent
hiwat=8
mode=
rate=48000
precision=16
bps=2
msb=1
encoding=slinear_le
pause=1
active=0
block_size=960
play.channels=2
play.bytes=0
play.errors=0
record.channels=2
record.bytes=0
record.errors=0
and a dmesg:
OpenBSD 5.9-current (GENERIC.MP) #1905: Sun Mar 6 19:13:08 MST 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 7945580544 (7577MB)
avail mem = 7700443136 (7343MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x8be3f000 (32 entries)
bios0: vendor Hewlett-Packard version "M85 Ver. 01.32" date 07/20/2015
bios0: Hewlett-Packard HP EliteBook Folio 9480m
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG SSDT SSDT SLIC MSDM FPDT BGRT
SSDT SSDT SSDT SSDT ASF! DMAR
acpi0: wakeup devices LANC(S5) EHC1(S3) XHC_(S3) PCIB(S5) RP03(S5)
NIC_(S5) RP04(S5) WNIC(S5) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.65 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.38 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.38 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.38 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 7 (RP02)
acpiprt3 at acpi0: bus 8 (RP04)
acpiprt4 at acpi0: bus -1 (RP07)
acpiprt5 at acpi0: bus -1 (RP08)
acpiprt6 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: APPR, resource for HDEF
acpipwrres1 at acpi0: COMP, resource for COM1
acpipwrres2 at acpi0: LPP_, resource for LPT0
acpipwrres3 at acpi0: PXP2, resource for RP02
acpipwrres4 at acpi0: WRST
acpitz0 at acpi0: critical temperature is 128 degC
acpitz1 at acpi0: critical temperature is 128 degC
acpitz2 at acpi0: critical temperature is 128 degC
acpitz3 at acpi0: critical temperature is 128 degC
acpitz4 at acpi0: critical temperature is 128 degC
acpitz5 at acpi0: critical temperature is 128 degC
acpitz6 at acpi0: critical temperature is 128 degC
acpitz7 at acpi0: critical temperature is 128 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 08622 2014/11/04 type
LIon oem "Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2701, 2700, 2600, 2400, 2300,
2100, 2000, 1800, 1700, 1600, 1400, 1300, 1100, 1000, 800, 756 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1600x900
error: [drm:pid0:intel_dp_set_idle_link_train] *ERROR* Timed out waiting
for DP idle patterns
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 8 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 0 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x04: msi, address
d0:bf:9c:23:82:30
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Realtek/0x0280
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 7
rtsx0 at pci2 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0
ppb2 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 8
iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev
0x6b, msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 0 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG MZ7PD256, DXM0> SCSI3
0/direct fixed naa.5002538500000000
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic
0 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub2 at uhub0 port 1 "SMSC USB2134B" rev 2.10/50.00 addr 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/63.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub2 port 3 configuration 1 interface 0 "Heng Yu Technology
Poker II" rev 1.10/1.00 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub2 port 3 configuration 1 interface 1 "Heng Yu Technology
Poker II" rev 1.10/1.00 addr 4
uhidev2: iclass 3/0, 3 report ids
uhid0 at uhidev2 reportid 1: input=0, output=0, feature=7
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev2 reportid 3: input=3, output=0, feature=0
umass0 at uhub2 port 4 configuration 1 interface 0 "MediaTek Inc MT1887"
rev 2.00/0.00 addr 5
umass0: using ATAPI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd0 at scsibus2 targ 1 lun 0: <TSSTcorp, CDDVDW SE-208DB, MF00> ATAPI
5/cdrom removable serial.0e8d180676YAG201R0C_
uhub3 at uhub0 port 3 "SMSC USB2134B" rev 2.10/60.80 addr 6
ugen0 at uhub0 port 4 "Intel product 0x07dc" rev 2.00/0.01 addr 7
ugen1 at uhub0 port 5 "Validity Sensors product 0x003d" rev 1.10/1.04 addr 8
uvideo0 at uhub0 port 7 configuration 1 interface 0 "Chicony Electronics
Co.,Ltd. HP HD Webcam" rev 2.00/66.68 addr 9
video0 at uvideo0
uhub4 at uhub0 port 10 "SMSC USB5534B" rev 3.00/50.00 addr 10
uhub5 at uhub0 port 12 "SMSC USB5534B" rev 3.00/60.80 addr 11
uhub6 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd1 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 244190MB, 512 bytes/sector, 500102858 sectors
root on sd1a (b152ffef20cc4714.a) swap on sd1b dump on sd1b
Thanks,
Simon
