I forgot, wd0a and e aren't the only OpenBSD partitions, the biggie is
wd0m, about 500 gigs. There's 4 gigs of RAM and I never had a problem
with it before, but I can reproduce the uvm fault by trying to fsck it
in single user mode. I don't remember whether swap is on at that
point or not. Maybe it's time to download Seagate's drive diagnostics
and run them, but the drive's less than 1 year old. Maybe it needs to
remap a sector.
The acpi and USB messages appear every time I open the lid on the
laptop, I don't pay much attention to them. It was running badblocks
on an SD card plugged into a USB reader that started all this, but I
don't see how a USB problem would persist through reboots. I've seen
some nasty crashes dealing with SD and USB memory sticks, it's almost
like they need their own utilities since they aren't really hard
drives.
OpenBSD 5.7 (GENERIC.MP) #767: Sun Mar 8 11:04:48 MDT 2015
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz ("GenuineIntel"
686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
real mem = 3747885056 (3574MB)
avail mem = 3674271744 (3504MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 07/16/13, BIOS32 rev. 0 @ 0xffa10, SMBIOS rev.
2.4 @ 0xf6bd0 (62 entries)
bios0: vendor Dell Inc. version "A12" date 07/16/2013
bios0: Dell Inc. Latitude D530
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC ASF! MCFG TCPA SLIC SSDT
acpi0: wakeup devices PCI0(S5) PCIE(S4) USB1(S0) USB2(S0) USB3(S0)
USB4(S0) USB5(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S3) RP02(S4)
RP03(S3) RP04(S3) RP05(S3) RP06(S5) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz ("GenuineIntel"
686-class) 2 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 3 (PCIE)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 11 (RP01)
acpiprt3 at acpi0: bus 12 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus 9 (RP06)
acpiprt8 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL" serial 1 type LION oem "Panasonic"
acpibat1 at acpi0: BAT1 not present
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivideo1 at acpi0: VID_
acpivout0 at acpivideo1: LCD_
acpivideo2 at acpi0: VID2
bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x1000
cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2001, 2000, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
composite sync not supported
composite sync not supported
inteldrm0: 1024x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: msi
azalia0: codecs: Sigmatel STAC9205X, Conexant/0x2c06, using Sigmatel STAC9205X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2 int 16
pci1 at ppb0 bus 11
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: apic 2 int 17
pci2 at ppb1 bus 12
athn0 at pci2 dev 0 function 0 "Atheros AR5418" rev 0x01: apic 2 int 17
athn0: MAC AR5418 rev 2, RF AR5133 (2T3R), ROM rev 8, address 00:21:63:30:0e:4c
ppb2 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x02: apic 2 int 17
pci3 at ppb2 bus 9
bge0 at pci3 dev 0 function 0 "Broadcom BCM5755M" rev 0x02, BCM5755 A2
(0xa002): msi, address 00:1d:09:d5:dd:b6
brgphy0 at bge0 phy 1: BCM5755 10/100/1000baseT PHY, rev. 0
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 20
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf2
pci4 at ppb3 bus 3
cbb0 at pci4 dev 1 function 0 "O2 Micro OZ711EZ1 CardBus" rev 0x21:
apic 2 int 19
"O2 Micro Firewire" rev 0x02 at pci4 dev 1 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L632H, D300> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 18 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST1000LM024 HN-M101MBB>
wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: SMI
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL6 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-5300CL6 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: ALPS Glidepoint, version 0x7321
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (abd27361b43df756.a) swap on wd0b dump on wd0b
umass0 at uhub1 port 1 configuration 1 interface 0 "Kingston
DataTraveler 2.0" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd0 at scsibus4 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI4
0/direct removable serial.09511665BE81491E5F0A
sd0: 14888MB, 512 bytes/sector, 30490624 sectors
On 2/29/16, Josh Grosse <j...@jggimi.homeip.net> wrote:
> On 2016-02-29 13:14, Alan Corey wrote:
>
>> I didn't send this to the list but I did cell phone pictures of the
>> screen.
>> Stopped in pmap_extract both times. And it gets through checking my
>> OpenBSD
>> partitions OK. Doesn't usually try to fsck the Linux partitions. I've
>> seen
>> booting after unclean shutdowns many times but it's always done the
>> fsck
>> and recovered.
>
> Thanks for the photo. Along with the pmap_extract fault, I see a
> significant
> USB event. Since UVM is the BSD virtual memory manager, I assume the
> USB
> event affects virtual memory maps, hence the fault.
>
> A pmap is the physical map of a virtual memory page to a physical
> location.
> (That's really all I know about them.)
>
> The ACPI event is probably related to the USB event, as it occurs
> between
> the last successful fsck and USB detaching.
>
> I can't tell you what the system is trying to do at the moment of
> failure;
> fsck executions during boot are based on fstab(5) fs_passno values (the
> sixth
> column in /etc/fstab), and its possible it's attempting the next fsck,
> or
> doing the next set of services in the rc(8) script -- which is mounting
> your
> filesystems.
>
> Either post a link to the photo, or type up the captured screen and send
> it to misc@. With a dmesg, which you should be able to get by starting
> in single-user mode.
>
> -Josh-
>
>
--
Credit is the root of all evil. - AB1JX
