Hello !
Maybe someone is interested, a dmesg of a Shuttle XS35V4 (Intel Bay
Trail TXE) using the Snapshot from January 18. The machine is fanless
and provides UEFI only.
The only thing which doesn't work is the by default integrated Wi-Fi
card.
Weird behaviours :
I used the machine before using a HDMI cable and a xorg.conf which is
not needed since some Snapshots. If you boot the machine, after some
time it switches to VGA only instead of HDMI. Yesterday I installed
the Snapshot again on a SSD - using only a VGA cable - and saw a kind
of flickering as I booted the installer (installation was not done).
If are booth cables VGA and HDMI are connected I don't saw this
behaviour (I don't / can't try the display port). Maybe this doesn't
happen in a newer Snapshot.
Thanks for the good work.
$ xrandr -q
Screen 0: minimum 8 x 8, current 1024 x 768, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis)
0mm x 0mm
1024x768 60.00*
800x600 60.32 56.25
848x480 60.00
640x480 59.94
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
HDMI and VGA is connected.
bsd.sp :
OpenBSD 5.9-beta (GENERIC.MP) #1850: Mon Jan 18 13:38:16 MST 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error f<fixed_disk,invalid_time>
real mem = 7970746368 (7601MB)
avail mem = 7724994560 (7367MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebd30 (52 entries)
bios0: vendor American Megatrends Inc. version "1.11 x64" date
08/26/2014
bios0: Shuttle Inc. XS35V4
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG LPIT SLIC HPET SSDT SSDT SSDT UEFI
acpi0: wakeup devices UAR5(S4) UAR8(S4) XHC1(S4) EHC1(S4) PXSX(S4)
PXSX(S4) RLAN(S5) PXSX(S4) PXSX(S4) PWRB(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.37 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 83MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins
acpimadt0: bogus nmi for apid 0
acpimadt0: bogus nmi for apid 2
acpimadt0: bogus nmi for apid 4
acpimadt0: bogus nmi for apid 6
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (RP04)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PLPE
acpipwrres1 at acpi0: PLPE
acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1
acpipwrres3 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 90 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2000 MHz: speeds: 1993, 1992, 1909, 1826,
1743, 1660, 1577, 1494, 1411, 1328 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e
inteldrm0 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1024x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0e: msi,
AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, LITEON IT LCS-25, 6C87> SCSI3
0/direct fixed naa.50023031003820f3
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <TEAC, BD-W26SS-B, 1.01> ATAPI 5/cdrom
removable
xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0e: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x0e:
msi
azalia0: codecs: Realtek ALC269, Intel/0x2882, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel Bay Trail I2C" rev 0x0e: msi
pci1 at ppb0 bus 1
vendor "Realtek", unknown product 0x8179 (class network subclass
miscellaneous, rev 0x01) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x0e: msi
pci2 at ppb1 bus 2
rtsx0 at pci2 dev 0 function 0 "Realtek RTL8411 Card Reader" rev 0x01:
msi
sdmmc0 at rtsx0
re0 at pci2 dev 0 function 2 "Realtek 8168" rev 0x0a: RTL8411
(0x4880), msi, address 80:ee:73:af:54:55
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x0e: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x0e: msi
pci4 at ppb3 bus 4
ehci0 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x0f34
rev 0x0e: apic 1 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0e
ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e:
apic 1 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0xa40
efifb at mainbus0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft
Microsoft\M-. Comfort Mouse 4500" rev 2.00/0.83 addr 2
uhidev0: iclass 3/1, 28 report ids
ums0 at uhidev0 reportid 16: 5 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev0 reportid 18: input=0, output=0, feature=1
uhid1 at uhidev0 reportid 19: input=1, output=0, feature=0
uhid2 at uhidev0 reportid 22: input=4, output=0, feature=0
uhid3 at uhidev0 reportid 23: input=0, output=0, feature=1
uhid4 at uhidev0 reportid 24: input=0, output=0, feature=1
uhid5 at uhidev0 reportid 28: input=1, output=0, feature=0
uhub2 at uhub0 port 3 "Apple, Inc. Keyboard Hub" rev 2.00/96.15 addr 3
uhidev1 at uhub2 port 2 configuration 1 interface 0 "Apple Inc. Apple
Keyboard" rev 2.00/0.74 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 5 key codes, country code 13
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub2 port 2 configuration 1 interface 1 "Apple Inc. Apple
Keyboard" rev 2.00/0.74 addr 4
uhidev2: iclass 3/0
uhid6 at uhidev2: input=1, output=0, feature=0
uhub3 at uhub0 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 5
urtwn0 at uhub3 port 3 configuration 1 interface 0 "Realtek 802.11n
NIC" rev 2.00/0.00 addr 6
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address c4:e9:84:06:6c:a7
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
uhub1: device problem, disabling port 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (d2cdbccb3d4994eb.a) swap on sd0b dump on sd0b
scsibus4 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 29724MB, 512 bytes/sector, 60874752 sectors
syncing disks... done
ehci0: halt timeout
rebooting...
OpenBSD 5.9-beta (GENERIC) #1723: Mon Jan 18 13:32:56 MST 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
RTC BIOS diagnostic error f<fixed_disk,invalid_time>
real mem = 7970746368 (7601MB)
avail mem = 7725035520 (7367MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebd30 (52 entries)
bios0: vendor American Megatrends Inc. version "1.11 x64" date
08/26/2014
bios0: Shuttle Inc. XS35V4
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG LPIT SLIC HPET SSDT SSDT SSDT UEFI
acpi0: wakeup devices UAR5(S4) UAR8(S4) XHC1(S4) EHC1(S4) PXSX(S4)
PXSX(S4) RLAN(S5) PXSX(S4) PXSX(S4) PWRB(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.38 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 83MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins
acpimadt0: bogus nmi for apid 0
acpimadt0: bogus nmi for apid 2
acpimadt0: bogus nmi for apid 4
acpimadt0: bogus nmi for apid 6
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (RP04)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PLPE
acpipwrres1 at acpi0: PLPE
acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1
acpipwrres3 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 90 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2000 MHz: speeds: 1993, 1992, 1909, 1826,
1743, 1660, 1577, 1494, 1411, 1328 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e
inteldrm0 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1024x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0e: msi,
AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, LITEON IT LCS-25, 6C87> SCSI3
0/direct fixed naa.50023031003820f3
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <TEAC, BD-W26SS-B, 1.01> ATAPI 5/cdrom
removable
xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0e: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x0e:
msi
azalia0: codecs: Realtek ALC269, Intel/0x2882, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel Bay Trail I2C" rev 0x0e: msi
pci1 at ppb0 bus 1
vendor "Realtek", unknown product 0x8179 (class network subclass
miscellaneous, rev 0x01) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x0e: msi
pci2 at ppb1 bus 2
rtsx0 at pci2 dev 0 function 0 "Realtek RTL8411 Card Reader" rev 0x01:
msi
sdmmc0 at rtsx0
re0 at pci2 dev 0 function 2 "Realtek 8168" rev 0x0a: RTL8411
(0x4880), msi, address 80:ee:73:af:54:55
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x0e: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x0e: msi
pci4 at ppb3 bus 4
ehci0 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x0f34
rev 0x0e: apic 1 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0e
ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e:
apic 1 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0xa40
efifb at mainbus0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft
Microsoft\M-. Comfort Mouse 4500" rev 2.00/0.83 addr 2
uhidev0: iclass 3/1, 28 report ids
ums0 at uhidev0 reportid 16: 5 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev0 reportid 18: input=0, output=0, feature=1
uhid1 at uhidev0 reportid 19: input=1, output=0, feature=0
uhid2 at uhidev0 reportid 22: input=4, output=0, feature=0
uhid3 at uhidev0 reportid 23: input=0, output=0, feature=1
uhid4 at uhidev0 reportid 24: input=0, output=0, feature=1
uhid5 at uhidev0 reportid 28: input=1, output=0, feature=0
uhub2 at uhub0 port 3 "Apple, Inc. Keyboard Hub" rev 2.00/96.15 addr 3
scsibus2 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 29724MB, 512 bytes/sector, 60874752 sectors
rtsx0: CRC error
uhidev1 at uhub2 port 2 configuration 1 interface 0 "Apple Inc. Apple
Keyboard" rev 2.00/0.74 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 5 key codes, country code 13
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub2 port 2 configuration 1 interface 1 "Apple Inc. Apple
Keyboard" rev 2.00/0.74 addr 4
uhidev2: iclass 3/0
uhid6 at uhidev2: input=1, output=0, feature=0
rtsx0: CRC error
uhub3 at uhub0 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 5
urtwn0 at uhub3 port 3 configuration 1 interface 0 "Realtek 802.11n
NIC" rev 2.00/0.00 addr 6
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address c4:e9:84:06:6c:a7
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
uhub1: device problem, disabling port 1
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (d2cdbccb3d4994eb.a) swap on sd0b dump on sd0b
hw.sensors.cpu0.temp0=36.00 degC
hw.sensors.acpitz0.temp0=26.80 degC (zone temperature)
hw.sensors.it0.temp0=36.00 degC
hw.sensors.it0.temp1=45.00 degC
hw.sensors.it0.temp2=248.00 degC
hw.sensors.it0.fan0=0 RPM
hw.sensors.it0.fan1=0 RPM
hw.sensors.it0.fan2=0 RPM
hw.sensors.it0.volt0=0.99 VDC (VCORE_A)
hw.sensors.it0.volt1=1.82 VDC (VCORE_B)
hw.sensors.it0.volt2=1.12 VDC (+3.3V)
hw.sensors.it0.volt3=2.34 VDC (+5V)
hw.sensors.it0.volt4=11.84 VDC (+12V)
hw.sensors.it0.volt5=-1.75 VDC (-12V)
hw.sensors.it0.volt6=0.57 VDC (-5V)
hw.sensors.it0.volt7=3.68 VDC (+5VSB)
hw.sensors.it0.volt8=2.16 VDC (VBAT)
bsd.mp :
OpenBSD 5.9-beta (GENERIC.MP) #1850: Mon Jan 18 13:38:16 MST 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error f<fixed_disk,invalid_time>
real mem = 7970746368 (7601MB)
avail mem = 7724994560 (7367MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebd30 (52 entries)
bios0: vendor American Megatrends Inc. version "1.11 x64" date
08/26/2014
bios0: Shuttle Inc. XS35V4
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG LPIT SLIC HPET SSDT SSDT SSDT UEFI
acpi0: wakeup devices UAR5(S4) UAR8(S4) XHC1(S4) EHC1(S4) PXSX(S4)
PXSX(S4) RLAN(S5) PXSX(S4) PXSX(S4) PWRB(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.37 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 83MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins
acpimadt0: bogus nmi for apid 0
acpimadt0: bogus nmi for apid 2
acpimadt0: bogus nmi for apid 4
acpimadt0: bogus nmi for apid 6
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (RP04)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PLPE
acpipwrres1 at acpi0: PLPE
acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1
acpipwrres3 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 90 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2000 MHz: speeds: 1993, 1992, 1909, 1826,
1743, 1660, 1577, 1494, 1411, 1328 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e
inteldrm0 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1024x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0e: msi,
AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, LITEON IT LCS-25, 6C87> SCSI3
0/direct fixed naa.50023031003820f3
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <TEAC, BD-W26SS-B, 1.01> ATAPI 5/cdrom
removable
xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0e: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x0e:
msi
azalia0: codecs: Realtek ALC269, Intel/0x2882, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel Bay Trail I2C" rev 0x0e: msi
pci1 at ppb0 bus 1
vendor "Realtek", unknown product 0x8179 (class network subclass
miscellaneous, rev 0x01) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x0e: msi
pci2 at ppb1 bus 2
rtsx0 at pci2 dev 0 function 0 "Realtek RTL8411 Card Reader" rev 0x01:
msi
sdmmc0 at rtsx0
re0 at pci2 dev 0 function 2 "Realtek 8168" rev 0x0a: RTL8411
(0x4880), msi, address 80:ee:73:af:54:55
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x0e: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x0e: msi
pci4 at ppb3 bus 4
ehci0 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x0f34
rev 0x0e: apic 1 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0e
ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e:
apic 1 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0xa40
efifb at mainbus0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft
Microsoft\M-. Comfort Mouse 4500" rev 2.00/0.83 addr 2
uhidev0: iclass 3/1, 28 report ids
ums0 at uhidev0 reportid 16: 5 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev0 reportid 18: input=0, output=0, feature=1
uhid1 at uhidev0 reportid 19: input=1, output=0, feature=0
uhid2 at uhidev0 reportid 22: input=4, output=0, feature=0
uhid3 at uhidev0 reportid 23: input=0, output=0, feature=1
uhid4 at uhidev0 reportid 24: input=0, output=0, feature=1
uhid5 at uhidev0 reportid 28: input=1, output=0, feature=0
uhub2 at uhub0 port 3 "Apple, Inc. Keyboard Hub" rev 2.00/96.15 addr 3
uhidev1 at uhub2 port 2 configuration 1 interface 0 "Apple Inc. Apple
Keyboard" rev 2.00/0.74 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 5 key codes, country code 13
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub2 port 2 configuration 1 interface 1 "Apple Inc. Apple
Keyboard" rev 2.00/0.74 addr 4
uhidev2: iclass 3/0
uhid6 at uhidev2: input=1, output=0, feature=0
uhub3 at uhub0 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 5
urtwn0 at uhub3 port 3 configuration 1 interface 0 "Realtek 802.11n
NIC" rev 2.00/0.00 addr 6
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address c4:e9:84:06:6c:a7
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
uhub1: device problem, disabling port 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (d2cdbccb3d4994eb.a) swap on sd0b dump on sd0b
scsibus4 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 29724MB, 512 bytes/sector, 60874752 sectors
syncing disks... done
ehci0: halt timeout
rebooting...
OpenBSD 5.9-beta (GENERIC) #1723: Mon Jan 18 13:32:56 MST 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
RTC BIOS diagnostic error f<fixed_disk,invalid_time>
real mem = 7970746368 (7601MB)
avail mem = 7725035520 (7367MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebd30 (52 entries)
bios0: vendor American Megatrends Inc. version "1.11 x64" date
08/26/2014
bios0: Shuttle Inc. XS35V4
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG LPIT SLIC HPET SSDT SSDT SSDT UEFI
acpi0: wakeup devices UAR5(S4) UAR8(S4) XHC1(S4) EHC1(S4) PXSX(S4)
PXSX(S4) RLAN(S5) PXSX(S4) PXSX(S4) PWRB(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.38 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 83MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins
acpimadt0: bogus nmi for apid 0
acpimadt0: bogus nmi for apid 2
acpimadt0: bogus nmi for apid 4
acpimadt0: bogus nmi for apid 6
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (RP04)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PLPE
acpipwrres1 at acpi0: PLPE
acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1
acpipwrres3 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 90 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2000 MHz: speeds: 1993, 1992, 1909, 1826,
1743, 1660, 1577, 1494, 1411, 1328 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e
inteldrm0 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1024x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0e: msi,
AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, LITEON IT LCS-25, 6C87> SCSI3
0/direct fixed naa.50023031003820f3
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <TEAC, BD-W26SS-B, 1.01> ATAPI 5/cdrom
removable
xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0e: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x0e:
msi
azalia0: codecs: Realtek ALC269, Intel/0x2882, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel Bay Trail I2C" rev 0x0e: msi
pci1 at ppb0 bus 1
vendor "Realtek", unknown product 0x8179 (class network subclass
miscellaneous, rev 0x01) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x0e: msi
pci2 at ppb1 bus 2
rtsx0 at pci2 dev 0 function 0 "Realtek RTL8411 Card Reader" rev 0x01:
msi
sdmmc0 at rtsx0
re0 at pci2 dev 0 function 2 "Realtek 8168" rev 0x0a: RTL8411
(0x4880), msi, address 80:ee:73:af:54:55
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x0e: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x0e: msi
pci4 at ppb3 bus 4
ehci0 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x0f34
rev 0x0e: apic 1 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0e
ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e:
apic 1 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0xa40
efifb at mainbus0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft
Microsoft\M-. Comfort Mouse 4500" rev 2.00/0.83 addr 2
uhidev0: iclass 3/1, 28 report ids
ums0 at uhidev0 reportid 16: 5 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev0 reportid 18: input=0, output=0, feature=1
uhid1 at uhidev0 reportid 19: input=1, output=0, feature=0
uhid2 at uhidev0 reportid 22: input=4, output=0, feature=0
uhid3 at uhidev0 reportid 23: input=0, output=0, feature=1
uhid4 at uhidev0 reportid 24: input=0, output=0, feature=1
uhid5 at uhidev0 reportid 28: input=1, output=0, feature=0
uhub2 at uhub0 port 3 "Apple, Inc. Keyboard Hub" rev 2.00/96.15 addr 3
scsibus2 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 29724MB, 512 bytes/sector, 60874752 sectors
rtsx0: CRC error
uhidev1 at uhub2 port 2 configuration 1 interface 0 "Apple Inc. Apple
Keyboard" rev 2.00/0.74 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 5 key codes, country code 13
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub2 port 2 configuration 1 interface 1 "Apple Inc. Apple
Keyboard" rev 2.00/0.74 addr 4
uhidev2: iclass 3/0
uhid6 at uhidev2: input=1, output=0, feature=0
rtsx0: CRC error
uhub3 at uhub0 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 5
urtwn0 at uhub3 port 3 configuration 1 interface 0 "Realtek 802.11n
NIC" rev 2.00/0.00 addr 6
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address c4:e9:84:06:6c:a7
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
uhub1: device problem, disabling port 1
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (d2cdbccb3d4994eb.a) swap on sd0b dump on sd0b
syncing disks...
OpenBSD 5.9-beta (GENERIC.MP) #1850: Mon Jan 18 13:38:16 MST 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error f<fixed_disk,invalid_time>
real mem = 7970746368 (7601MB)
avail mem = 7724994560 (7367MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebd30 (52 entries)
bios0: vendor American Megatrends Inc. version "1.11 x64" date
08/26/2014
bios0: Shuttle Inc. XS35V4
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG LPIT SLIC HPET SSDT SSDT SSDT UEFI
acpi0: wakeup devices UAR5(S4) UAR8(S4) XHC1(S4) EHC1(S4) PXSX(S4)
PXSX(S4) RLAN(S5) PXSX(S4) PXSX(S4) PWRB(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.36 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 83MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 1999.99 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 1999.99 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 1999.99 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins
acpimadt0: bogus nmi for apid 0
acpimadt0: bogus nmi for apid 2
acpimadt0: bogus nmi for apid 4
acpimadt0: bogus nmi for apid 6
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (RP04)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PLPE
acpipwrres1 at acpi0: PLPE
acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1
acpipwrres3 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 90 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2000 MHz: speeds: 1993, 1992, 1909, 1826,
1743, 1660, 1577, 1494, 1411, 1328 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e
inteldrm0 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1024x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0e: msi,
AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, LITEON IT LCS-25, 6C87> SCSI3
0/direct fixed naa.50023031003820f3
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <TEAC, BD-W26SS-B, 1.01> ATAPI 5/cdrom
removable
xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0e: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x0e:
msi
azalia0: codecs: Realtek ALC269, Intel/0x2882, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel Bay Trail I2C" rev 0x0e: msi
pci1 at ppb0 bus 1
vendor "Realtek", unknown product 0x8179 (class network subclass
miscellaneous, rev 0x01) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x0e: msi
pci2 at ppb1 bus 2
rtsx0 at pci2 dev 0 function 0 "Realtek RTL8411 Card Reader" rev 0x01:
msi
sdmmc0 at rtsx0
re0 at pci2 dev 0 function 2 "Realtek 8168" rev 0x0a: RTL8411
(0x4880), msi, address 80:ee:73:af:54:55
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x0e: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x0e: msi
pci4 at ppb3 bus 4
ehci0 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x0f34
rev 0x0e: apic 1 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0e
ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e:
apic 1 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0xa40
efifb at mainbus0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft
Microsoft\M-. Comfort Mouse 4500" rev 2.00/0.83 addr 2
uhidev0: iclass 3/1, 28 report ids
ums0 at uhidev0 reportid 16: 5 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev0 reportid 18: input=0, output=0, feature=1
uhid1 at uhidev0 reportid 19: input=1, output=0, feature=0
uhid2 at uhidev0 reportid 22: input=4, output=0, feature=0
uhid3 at uhidev0 reportid 23: input=0, output=0, feature=1
uhid4 at uhidev0 reportid 24: input=0, output=0, feature=1
uhid5 at uhidev0 reportid 28: input=1, output=0, feature=0
uhub2 at uhub0 port 3 "Apple, Inc. Keyboard Hub" rev 2.00/96.15 addr 3
scsibus2 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 29724MB, 512 bytes/sector, 60874752 sectors
rtsx0: CRC error
uhidev1 at uhub2 port 2 configuration 1 interface 0 "Apple Inc. Apple
Keyboard" rev 2.00/0.74 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 5 key codes, country code 13
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub2 port 2 configuration 1 interface 1 "Apple Inc. Apple
Keyboard" rev 2.00/0.74 addr 4
uhidev2: iclass 3/0
uhid6 at uhidev2: input=1, output=0, feature=0
rtsx0: CRC error
uhub3 at uhub0 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 5
urtwn0 at uhub3 port 3 configuration 1 interface 0 "Realtek 802.11n
NIC" rev 2.00/0.00 addr 6
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address c4:e9:84:06:6c:a7
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
uhub1: device problem, disabling port 1
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (d2cdbccb3d4994eb.a) swap on sd0b dump on sd0b
hw.sensors.cpu0.temp0=39.00 degC
hw.sensors.acpitz0.temp0=26.80 degC (zone temperature)
hw.sensors.it0.temp0=39.00 degC
hw.sensors.it0.temp1=46.00 degC
hw.sensors.it0.temp2=248.00 degC
hw.sensors.it0.fan0=0 RPM
hw.sensors.it0.fan1=0 RPM
hw.sensors.it0.fan2=0 RPM
hw.sensors.it0.volt0=0.98 VDC (VCORE_A)
hw.sensors.it0.volt1=1.84 VDC (VCORE_B)
hw.sensors.it0.volt2=1.12 VDC (+3.3V)
hw.sensors.it0.volt3=2.34 VDC (+5V)
hw.sensors.it0.volt4=11.84 VDC (+12V)
hw.sensors.it0.volt5=-1.75 VDC (-12V)
hw.sensors.it0.volt6=0.57 VDC (-5V)
hw.sensors.it0.volt7=3.68 VDC (+5VSB)
hw.sensors.it0.volt8=2.16 VDC (VBAT)
EOF
