On Sat, Jan 09, 2016 at 04:52:24PM -0700, Devin Reade wrote:
> I reported a problem on the bugs@ list in that I have a machine that
> panics if the msk(4) interface is used, but works fine with an em(4)
> interface.
>
> There is a possibility that I have bad hardware as I've been able to
> replicate this on 5.9 beta, 5.8 release, and now 5.7 release. I find
> it unlikely that msk(4) has been broken that long.
>
> Is anyone running a machine using the msk NIC, for any of those
> versions of OpenBSD? If so and you can send traffic over your
> msk for more than a few minutes without causing a panic, I'll treat
> it as dead hardware and move along.
>
> For that matter if you have msk running successfully on an earlier
> version of OpenBSD, let me know what version and I can test against it.
>
> Thanks,
> Devin
>
Hi,
the msk on a Panasonic CF-29 is doing fine here. (Dmesg below.)
Started with 4.8 in the beginning of 2011 and changed
to following current on this machine when 5.4 came out.
Pushed and pulled a few GB with current right now without panic.
HTH,
rru
OpenBSD 5.9-beta (GENERIC) #1495: Mon Jan 11 08:31:59 MST 2016
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class) 599 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,EST,TM2,PERF
real mem = 1600536576 (1526MB)
avail mem = 1557356544 (1485MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 08/03/06, BIOS32 rev. 0 @ 0xfd661, SMBIOS rev. 2.3 @
0xe5270 (46 entries)
bios0: vendor Phoenix Technologies K.K. version "V4.00L15" date 08/03/2006
bios0: Matsushita Electric Industrial Co.,Ltd. CF-29L3Q71BE
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC BOOT MCFG SSDT SSDT SSDT
acpi0: wakeup devices LID_(S4) RP01(S4) MODM(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
bus 0
extent `pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0x9ffff
0xc0000 - 0xcffff
0xe0000 - 0x5fffffff
0xfec00000 - 0xffffffff
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus 6 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: !C3(100@185 io@0x1016), !C3(250@85 io@0x1015), !C2(500@1
io@0x1014), C1(1000@1 halt), PSS
acpitz0 at acpi0: critical temperature is 106 degC
acpibtn0 at acpi0: LID_
acpibat0 at acpi0: BATA model "CF-VZSU29A" serial 00000 type LION oem
"Panasonic"
acpibat1 at acpi0: BATB not present
acpiac0 at acpi0: AC unit offline
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
bios0: ROM list: 0xc0000/0xf200! 0xe0000/0x1800! 0xe4000/0xc000!
cpu0: Enhanced SpeedStep 599 MHz: speeds: 1600, 1400, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
inteldrm0 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0: apic 1 int 16
inteldrm0: 1024x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x19, Yukon-2 EC
rev. A2 (0x1): apic 1 int 16
msk0 at mskc0 port A: address 00:0b:97:a1:c3:be
eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci2 at ppb1 bus 6
cbb0 at pci2 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0x8b: apic 1 int 20
cbb1 at pci2 dev 1 function 1 "Ricoh 5C476 CardBus" rev 0x8b: apic 1 int 21
sdhc0 at pci2 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x11: apic 1 int 19
sdmmc0 at sdhc0
iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: apic 1 int
18, address 00:16:6f:89:07:f2
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 8 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x04: apic 1 int 17,
ICH6 AC97
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at auich0
"Intel 82801FB Modem" rev 0x04 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS541080G9AT00>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8173, R66P> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
ugen0 at uhub3 port 2 "ALPS UGX" rev 1.10/11.68 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (c0665ed7dcd33990.a) swap on wd0b dump on wd0b
