---- On Mon, 11 Jan 2016 13:16:53 -0700 Stefan Sperling <s...@stsp.name>wrote ----
> On Mon, Jan 11, 2016 at 11:13:03AM -0700, Chris Wojo wrote: > > I'm trying to connect to a wireless access point but receive "iwm0: could > > not initiate 2 GHz scan" from dmesg. > > I'm seeing these message sometimes but they are transient > and scanning usually works fine after another attempt. > So I haven't investigated this problem yet. > > > Wondering if this is due to being in a work environment with multiple > > access points with same nwid; although I doubt that because of seeing > > different mac address. > > That shouldn't be a problem. > > Do you see this issue only in that specific environment? > Does it also occur with OpenBD 5.8 release? > > > iwm0: device timeout > > That's bad. It means the device failed to transmit. > This is probably the reason you can't connect to the AP. > So it appears that iwm0 does work on snapshot #1800 on my home wireless AP. The errors previously reported still occur on the office network where several AP's are using the same NWID. I would be more than happy to troubleshoot this so others won't run into the same problem. Thank you.
