> Date: Thu, 7 Jan 2016 11:08:39 +0000 (UTC) > From: <open...@tuta.io> > > Hi Mark, > Thanks for having a look at this. > The 6th of January install59.fs should have v 1.298 of acpi.c > But I still get the same 'can't map interrupt' on both EHCI and XHCI. > Let me know if there's a way to collect more support data to help > investigating this. > Thanks. > Regards,
So I got an ASUS X205TA myself. It's an "interesting" machine. Been busy hacking on it over the weekend, but here is a short update: * The machine implements the "Hardware Reduced ACPI" variant introduced in the ACPI 5.0 standard. Limitied support for this variant has been added to the our ACPI implementation. * With this support, the machine boots OpenBSD, but hardware support is still very limited. Basically only graphics (inteldrm(4)) and USB (xhci(4)) work. The keyboard and touchpad don't work yet. So you'll need to use an external usb keyboard for now. * I've got code to make the eMMC work. It's not enabled yet though. With a hack the SD card slot works as well, but I need to replace the hack with some gpio code that I'm working on now. The SDIO controller needs a similar hack. * Wireless is Broadcom, connected through SDIO. Communication with the card works, but we don't have a driver for it. Don't expect it to work any time soon. * Keyboard and touchpad are connected over I2C and jcs@ is working on a driver for it for a different machine. Hopefully his code will work in the X205TA as well. Since basic support is enabled now, you might want to try a new snapshot. Cheers, Mark
