Am 26.12.2015 um 23:18 schrieb Alexander Hall: > On Sat, Dec 26, 2015 at 10:41:34PM +0100, Thomas Bohl wrote: >> Hello, >> >> I updated from 5.8-stabel to current today. (First just an update, than >> because of the problem a fresh installation.) On 5.8-stabel I had a >> working softraid boot setup with a USB-Stick as keydisk. >> >> Now, if the keydisk is plugged in, the machine resets over and over >> again. Unfortunately there is noting shown on screen to present here. >> When the bootloader should show up there is just a beep sound (like when >> the machine is power on) and than the BIOS comes again. > > I'd say it seems your system is trying to boot off the keydisk. Make sure > fdisk shows no flagged partition, or remote the flag by > > fdisk:*1> flag 3 > Partition 3 marked active. > fdisk:*1> flag 3 0 > Partition 3 flag value set to 0x0. > > By then, 'p' should show no partition with an asterisk before it. > > /Alexander
Thanks. Unfortunately that didn't do the trick. I was able to get more information by reducing the number of harddisks and taking video :-). One disk: System boots normally Two disks: booting sr0a:/bsd: 6823756heap full (0x9fba0+16384) Screenshot http://s30.postimg.org/894owvh41/image.jpg System resets Three disks: booting sr0a:/bsd: 6823756heap full (0x9fd98+16384) Screenshot http://s14.postimg.org/3ty4m62lt/image.jpg System resets Four disks: Black screen after BIOS System resets
