I own a Compex WLE200NX Atheros AR9280 Minipci-express Wlan Card and use it
in hostap-mode.
Every 10 minutes i get the following error:
/bsd: athn0: device timeout
The Wlan connections and all radio/video streaming stopps.
Then i do manually a "sh /etc/netstart athn0" and the radio/video streaming
continue.
Thats very annoying. Isn't there
a) a reasonable minipci-express wlan card for hostap-mode which is stable or
b) a patch for the device timeout-error?
I thought OpenBSD is ideally for routers?
My setup:
*/etc/hostname.re0*
up
*/etc/hostname.vlan100*
vlan 100 vlandev re0
up
*/etc/hostname.vlan178*
inet 192.168.178.184 255.255.255.0 NONE vlan 178 vlandev re0
up
*/etc/hostname.athn0*
mediaopt hostap mode 11g nwid openbsd wpakey <password> up
*/etc/hostname.vether0*
inet 192.168.100.184 255.255.255.0
up
*/etc/hostname.bridge0*
add athn0
add vlan100
add vether0
up
*/etc/pf.conf*
if_lo="lo0"
ext_if="vlan178"
int_if="vether0"
wlan_if="athn0"
set skip on $if_lo
set skip on $int_if
set skip on $wlan_if
match on $ext_if scrub (reassemble tcp random-id max-mss 1440)
match out on $ext_if from any to !($ext_if) nat-to ($ext_if)
block all
pass out on $ext_if proto tcp all keep state flags S/SA
pass out on $ext_if proto { udp, icmp } all keep state
*dmesg:*
OpenBSD 5.8 (GENERIC.MP) #1236: Sun Aug 16 02:31:04 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8256442368 (7873MB)
avail mem = 8002322432 (7631MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xec3d0 (78 entries)
bios0: vendor American Megatrends Inc. version "B252P008" date 05/22/2015
bios0: ZOTAC XXXXXX
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT UEFI SSDT ASF! SSDT
SSDT SSDT DMAR
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) M-5Y10c CPU @ 0.80GHz, 1995.70 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) M-5Y10c CPU @ 0.80GHz, 1995.39 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) M-5Y10c CPU @ 0.80GHz, 1995.39 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) M-5Y10c CPU @ 0.80GHz, 1995.39 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimadt0: bogus nmi for apid 0
acpimadt0: bogus nmi for apid 2
acpimadt0: bogus nmi for apid 1
acpimadt0: bogus nmi for apid 3
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 1 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus 2 (RP03)
acpiprt7 at acpi0: bus 3 (RP04)
acpiprt8 at acpi0: bus 4 (RP05)
acpiprt9 at acpi0: bus -1 (RP06)
acpiprt10 at acpi0: bus -1 (RP07)
acpiprt11 at acpi0: bus -1 (RP08)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: !C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: !C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: !C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: FN00, resource for FAN0
acpipwrres4 at acpi0: FN01, resource for FAN1
acpipwrres5 at acpi0: FN02, resource for FAN2
acpipwrres6 at acpi0: FN03, resource for FAN3
acpipwrres7 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: LID0
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1995 MHz: speeds: 1001, 1000, 900, 800, 700, 600,
500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 5300" rev 0x09
intagp at vga1 not configured
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
sdhc0 at pci0 dev 23 function 0 vendor "Intel", unknown product 0x9cb5 rev
0x03: apic 2 int 22
sdmmc0 at sdhc0
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek/0x0892
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 2 int 18
athn0: AR9280 rev 2 (2T2R), ROM rev 22, address 04:f0:21:17:40:33
ppb2 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL
(0x2c80), msi, address 00:01:2e:66:3a:a3
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb3 at pci0 dev 28 function 4 "Intel 9 Series PCIE" rev 0xe3: msi
pci4 at ppb3 bus 4
re1 at pci4 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL
(0x2c80), msi, address 00:01:2e:66:3a:a4
rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI
1.3
ahci0: port 3: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 3 lun 0: <ATA, PLEXTOR PX-128M6, 1.01> SCSI3 0/direct
fixed naa.500230310063e767
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2
int 18
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sdmmc0: can't enable card
ulpt0 at uhub0 port 1 configuration 1 interface 0 "Hewlett-Packard hp
LaserJet 1320 series" rev 1.10/1.00 addr 2
ulpt0: using bi-directional mode
umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" rev
2.00/57.13 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC/MS PRO, 1.00> SCSI2 0/direct
removable serial.0bda0153926571200000
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Cherry Mikroschalter
product 0x0011" rev 2.00/1.00 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhub2 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (1adf0ec629047a36.a) swap on sd0b dump on sd0b
--
View this message in context:
http://openbsd-archive.7691.n7.nabble.com/bsd-athn0-device-timeout-tp285288.html
Sent from the openbsd user - misc mailing list archive at Nabble.com.
