On Wed, Nov 18, 2015 at 08:15:08PM +0000, Raf Czlonka wrote:
> Stefan, the OP already mentioned (see above) that he had already tried
> that and it stays constant.
>
> On my machine, increasing the volume on 'outputs.mixY', where 'Y' is
> '2', did the trick.
>
> Setting 'outputs.hp_boost=on' (for headphones) may increase the volume
> further.
>
> Regards,
>
> Raf
>
I haven't got an outputs.mixY on my box, I'm afraid. There are references in
other
values to a mix2 though, like outputs.spkr2_source=mix2. There *is* an
inputs.mix_spkr{2,3}.
Changing them gives me an extra 10 units of volume (170 is distinguishable from
255, 180 is not).
mixerctl output:
inputs.dac-0:1=150,150
inputs.dac-2:3=150,150
record.adc-2:3_mute=off
record.adc-2:3=124,124
record.adc-0:1_mute=off
record.adc-0:1=124,124
inputs.mix_source=mic2,spkr2,spkr3,beep
inputs.mix_mic2=120,120
inputs.mix_spkr2=248,248
inputs.mix_spkr3=248,248
inputs.mix_beep=120,120
inputs.mix2_source=dac-0:1,mix
inputs.mix3_source=dac-2:3,mix
inputs.mic=85,85
outputs.spkr_source=mix3
outputs.spkr_mute=off
outputs.spkr_eapd=on
outputs.hp_source=mix2
outputs.hp_mute=off
outputs.hp_boost=off
outputs.hp_eapd=on
outputs.mic2_source=mix2
outputs.mic2_mute=off
inputs.mic2=85,85
outputs.mic2_dir=input-vr80
outputs.spkr2_source=mix2
outputs.spkr2_mute=off
inputs.spkr2=255,255
outputs.spkr2_dir=output
outputs.spkr3_source=mix2
outputs.spkr3_mute=off
inputs.spkr3=255,255
outputs.spkr3_dir=output
record.adc-0:1_source=mic2,spkr2,spkr3,beep,mix,mic
record.adc-2:3_source=mic2,spkr2,spkr3,beep,mix
outputs.hp_sense=unplugged
outputs.mic2_sense=unplugged
outputs.spkr_muters=hp,mic2
outputs.master=151,151
outputs.master.mute=off
outputs.master.slaves=dac-0:1,dac-2:3,spkr,hp,spkr2,spkr3
record.volume=124,124
record.volume.mute=off
record.volume.slaves=adc-2:3,adc-0:1
