---------- Forwarded message ----------
From: Notofsoundmind . <notofsoundmind...@gmail.com>
Date: Tue, Nov 10, 2015 at 5:47 PM
Subject: Re: USB mouse often not detected
To: Paco Willers <paco.will...@gmail.com>
Hello everyone,
I am having a similar problem with USB. At times I can attach a
device (mouse, keyboard, external HDD) and the machine will
recognize it immediately. Other times this is not the case, and I
have to unplug and replug multiple times for it to work. Also these
devices will randomly disconnect, and I get the message
"ehci_sync_hc: tsleep() = 35". After much thought I assumed the
problem may be related to the nVidia hardware on the motherboard
so I ordered another motherboard without nVidia components..
My dmesg as follows:
OpenBSD 5.8 (GENERIC) #1170: Sun Aug 16 02:26:00 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1056636928 (1007MB)
avail mem = 1020821504 (973MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf906f (4 entries)
bios0: vendor American Megatrends Inc. version "P2.40" date 07/16/2007
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC OEMB
acpi0: wakeup devices PS2K(S4) PS2M(S4) UAR1(S4) USB0(S4) MAC_(S5) AC97(S4)
USB1(S4) USB2(S4) P0P1(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 2010.03 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 89 present, BIOS upgrade may be required
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P0P1)
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpipwrres0 at acpi0: ISAV, resource for IDE0
acpibtn0 at acpi0: PWRB
cpu0: Cool'n'Quiet K8 2010 MHz: speeds: 2000 1800 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce3 250 PCI Host" rev 0xa1
agp at pchb0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce3 250 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce3 250 SMBus" rev 0xa1
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce3 250 USB" rev 0xa1: apic 1
int 9, version 1.0, legacy support
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce3 250 USB" rev 0xa1: apic 1
int 5, version 1.0, legacy support
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce3 250 USB" rev 0xa2: apic 1
int 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
nfe0 at pci0 dev 5 function 0 "NVIDIA nForce3 LAN" rev 0xa2: apic 1 int 9,
address 00:19:66:54:59:33
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
auich0 at pci0 dev 6 function 0 "NVIDIA nForce3 250 AC97" rev 0xa1: apic 1
int 9, nForce3 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850 rev 0)
audio0 at auich0
pciide0 at pci0 dev 8 function 0 "NVIDIA nForce3 250 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PHILIPS, DVD+-RW DVD8701, 5D24> ATAPI
5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 10 function 0 "NVIDIA nForce3 250 SATA" rev 0xa2: DMA
pciide1: using apic 1 int 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-60LSA0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ppb0 at pci0 dev 11 function 0 "NVIDIA nForce3 250 AGP" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX 5500" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 14 function 0 "NVIDIA nForce3 250" rev 0xa2
pci2 at ppb1 bus 2
rl0 at pci2 dev 5 function 0 "Realtek 8139" rev 0x10: apic 1 int 9, address
00:e0:52:9d:a1:08
rlphy1 at rl0 phy 0: RTL internal PHY
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
lm1 at wbsio0 port 0x290/8: W83627HF
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Holtek product 0x1203"
rev 2.00/2.80 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Holtek product 0x1203"
rev 2.00/2.80 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (af0ea10fdafff911.a) swap on wd0b dump on wd0b
WARNING: NVRAM century is 52 but RTC year is 2015
On Tue, Nov 10, 2015 at 2:51 PM, Paco Willers <paco.will...@gmail.com>
wrote:
> Hi,
>
>
> I reinstalled OpenBSD 5.8 and updated to stable again, so I now have a
> clean install. The only thing I configured manually is: I added
> 'apmd_flags="-A"' in /etc/rc.conf.local to do CPU frequency scaling while
> I'm not sure my system supports it.
>
> It seems a randomly occuring problem. My mouse: "vendor 0x0000 USB OPTICAL
> MOUSE". It's wholesale cheap stuff. Other OSes don't show the problem, and
> that makes me believe the mouse is doing alright. I happen to have two of
> them, so to be certain I'll swap it and test this new configuration in a
> few days. I'll keep you informed. I wouldn't be surprised if this cheap
> piece of hardware would have some minor incompatibility that only a correct
> OS's (OpenBSD) driver would crash upon. :-) (That doesn't explain Maurice's
> identical problem using a Logitech mouse. Also, to my knowledge a crashed
> driver would raise an error message which I didn't see.)
>
> Here are my dmesg outputs that might help. Of course if you want to see
> more files, I'd be happy to provide them. Also if you come up with some
> ideas I could test, let me know. (I won't be available for a few days
> however.)
>
> My dmesg detecting the mouse:
>
> OpenBSD 5.8-stable (GENERIC.MP) #0: Tue Nov 10 19:15:31 CET 2015
> r...@test.example.com:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> cpu0:
>
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,xTPR,PERF
> real mem = 2675343360 (2551MB)
> avail mem = 2609262592 (2488MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 06/16/04, BIOS32 rev. 0 @ 0xeb560, SMBIOS rev. 2.3
> @ 0xeeae0 (63 entries)
> bios0: vendor Hewlett-Packard version "786C1 v01.05" date 06/16/2004
> bios0: Hewlett-Packard HP Compaq dc7100 SFF(DX878AV)
> acpi0 at bios0: rev 0
> acpi0: sleep states S0 S1 S3 S4 S5
> acpi0: tables DSDT FACP SSDT APIC ASF! MCFG
> acpi0: wakeup devices PCI0(S4) PEG1(S4) PCX1(S4) PCX2(S4) PCX4(S4) HUB_(S4)
> COM1(S4) COM2(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3) PBTN(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 199MHz
> cpu0: mwait min=64, max=64
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> cpu1:
>
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,xTPR,PERF
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 1
> acpimcfg0 at acpi0 addr 0xd0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 32 (PCX1)
> acpiprt2 at acpi0: bus 64 (PCX2)
> acpiprt3 at acpi0: bus -1 (PCX4)
> acpiprt4 at acpi0: bus 5 (HUB_)
> acpicpu0 at acpi0: C1(@1 halt!)
> acpicpu1 at acpi0: C1(@1 halt!)
> acpibtn0 at acpi0: PBTN
> bios0: ROM list: 0xc0000/0xa800! 0xca800/0x1000 0xcb800/0x2000
> 0xe9c00/0x6400!
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82915G Host" rev 0x04
> vga1 at pci0 dev 2 function 0 "Intel 82915G Video" rev 0x04
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: 1024x768
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 82915G Video" rev 0x04 at pci0 dev 2 function 1 not configured
> ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
> pci1 at ppb0 bus 32
> ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03: apic 1 int 17
> pci2 at ppb1 bus 64
> bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
> (0x4001): apic 1 int 17, address 00:12:79:67:d1:01
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 20
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 18
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 21
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 22
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 20
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd3
> pci3 at ppb2 bus 5
> auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int
> 21, ICH6 AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <PHILIPS, SPD2414T, P1.0> ATAPI 5/cdrom
> removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
> pciide0: channel 1 disabled (no drives)
> pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x03: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 1 int 19 for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <Maxtor 6E040T0>
> wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> uhidev0 at uhub1 port 2 configuration 1 interface 0 "vendor 0x0000 USB
> OPTICAL MOUSE" rev 1.10/1.00 addr 2
> uhidev0: iclass 3/1, 1 report id
> ums0 at uhidev0 reportid 1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on wd0a (ae95fd8cdc627913.a) swap on wd0b dump on wd0b
>
> My dmesg -s detecting the mouse:
>
> Automatic boot in progress: starting file system checks.
> /dev/wd0a (ae95fd8cdc627913.a): file system is clean; not checking
> /dev/wd0k (ae95fd8cdc627913.k): file system is clean; not checking
> /dev/wd0d (ae95fd8cdc627913.d): file system is clean; not checking
> /dev/wd0f (ae95fd8cdc627913.f): file system is clean; not checking
> /dev/wd0g (ae95fd8cdc627913.g): file system is clean; not checking
> /dev/wd0h (ae95fd8cdc627913.h): file system is clean; not checking
> /dev/wd0j (ae95fd8cdc627913.j): file system is clean; not checking
> /dev/wd0i (ae95fd8cdc627913.i): file system is clean; not checking
> /dev/wd0e (ae95fd8cdc627913.e): file system is clean; not checking
> setting tty flags
> pf enabled
> starting network
> starting early daemons: syslogd pflogd ntpd.
> starting RPC daemons:.
> savecore: no core dump
> checking quotas: done.
> clearing /tmp
> kern.securelevel: 0 -> 1
> creating runtime link editor directory cache.
> preserving editor files.
> starting network daemons: sshd smtpd sndiod.
> starting local daemons: cron xdm.
> Tue Nov 10 22:29:12 CET 2015
>
> My dmesg not detecting the mouse:
>
> OpenBSD 5.8-stable (GENERIC.MP) #0: Tue Nov 10 19:15:31 CET 2015
> r...@test.example.com:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> cpu0:
>
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,xTPR,PERF
> real mem = 2675343360 (2551MB)
> avail mem = 2609262592 (2488MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 06/16/04, BIOS32 rev. 0 @ 0xeb560, SMBIOS rev. 2.3
> @ 0xeeae0 (63 entries)
> bios0: vendor Hewlett-Packard version "786C1 v01.05" date 06/16/2004
> bios0: Hewlett-Packard HP Compaq dc7100 SFF(DX878AV)
> acpi0 at bios0: rev 0
> acpi0: sleep states S0 S1 S3 S4 S5
> acpi0: tables DSDT FACP SSDT APIC ASF! MCFG
> acpi0: wakeup devices PCI0(S4) PEG1(S4) PCX1(S4) PCX2(S4) PCX4(S4) HUB_(S4)
> COM1(S4) COM2(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3) PBTN(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 199MHz
> cpu0: mwait min=64, max=64
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> cpu1:
>
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,xTPR,PERF
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 1
> acpimcfg0 at acpi0 addr 0xd0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 32 (PCX1)
> acpiprt2 at acpi0: bus 64 (PCX2)
> acpiprt3 at acpi0: bus -1 (PCX4)
> acpiprt4 at acpi0: bus 5 (HUB_)
> acpicpu0 at acpi0: C1(@1 halt!)
> acpicpu1 at acpi0: C1(@1 halt!)
> acpibtn0 at acpi0: PBTN
> bios0: ROM list: 0xc0000/0xa800! 0xca800/0x1000 0xcb800/0x2000
> 0xe9c00/0x6400!
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82915G Host" rev 0x04
> vga1 at pci0 dev 2 function 0 "Intel 82915G Video" rev 0x04
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: 1024x768
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 82915G Video" rev 0x04 at pci0 dev 2 function 1 not configured
> ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
> pci1 at ppb0 bus 32
> ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03: apic 1 int 17
> pci2 at ppb1 bus 64
> bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
> (0x4001): apic 1 int 17, address 00:12:79:67:d1:01
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 20
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 18
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 21
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 22
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 20
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd3
> pci3 at ppb2 bus 5
> auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int
> 21, ICH6 AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <PHILIPS, SPD2414T, P1.0> ATAPI 5/cdrom
> removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
> pciide0: channel 1 disabled (no drives)
> pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x03: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 1 int 19 for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <Maxtor 6E040T0>
> wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on wd0a (ae95fd8cdc627913.a) swap on wd0b dump on wd0b
>
> My dmesg -s not detecting the mouse:
>
> Automatic boot in progress: starting file system checks.
> /dev/wd0a (ae95fd8cdc627913.a): file system is clean; not checking
> /dev/wd0k (ae95fd8cdc627913.k): file system is clean; not checking
> /dev/wd0d (ae95fd8cdc627913.d): file system is clean; not checking
> /dev/wd0f (ae95fd8cdc627913.f): file system is clean; not checking
> /dev/wd0g (ae95fd8cdc627913.g): file system is clean; not checking
> /dev/wd0h (ae95fd8cdc627913.h): file system is clean; not checking
> /dev/wd0j (ae95fd8cdc627913.j): file system is clean; not checking
> /dev/wd0i (ae95fd8cdc627913.i): file system is clean; not checking
> /dev/wd0e (ae95fd8cdc627913.e): file system is clean; not checking
> setting tty flags
> pf enabled
> starting network
> starting early daemons: syslogd pflogd ntpd.
> starting RPC daemons:.
> savecore: no core dump
> checking quotas: done.
> clearing /tmp
> kern.securelevel: 0 -> 1
> creating runtime link editor directory cache.
> preserving editor files.
> starting network daemons: sshd smtpd sndiod.
> starting local daemons: apmd cron xdm.
> Tue Nov 10 23:06:23 CET 2015
>
> Replugging the mouse into a different random port (which will also fail
> later):
>
> Console log for test.example.com
> uhidev0 at uhub3 port 2 configuration 1 interface 0 "vendor 0x0000 USB
> OPTICA (text continues out of console window's border)
> uhidev0: iclass 3/1, 1 report id
> ums0 at uhidev0 reportid 1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
>
>
> Have a nice day,
> Paco
