Hi all:
I just installed 5.8 on the x86_64 arch. Immediately after installing,
I upgraded to -current. Upon rebooting into the new -current, a number
of errors appeared in the dmesg after the network started. The first
error was:
ssh-keygen: can't load library 'libcrypto.so.36.1'
A cascade of errors followed: syslogd, pflogd, ntpd, and smtpd.
In fact, I don't have 'libcrypto.so.36.1' but 'libcrypto.so.35.0.'
Did I possibly miss something obvious in the upgrade (??) or should I
take this over to tech@?
Thanks.
dmesg:
OpenBSD 5.8-current (GENERIC.MP) #1562: Mon Nov 2 09:25:07 MST 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 11<memory_size>
real mem = 8436838400 (8045MB)
avail mem = 8177016832 (7798MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0450 (82 entries)
bios0: vendor Dell Inc. version "A03" date 02/13/2010
bios0: Dell Inc. OptiPlex 780
acpi0 at bios0: rev 2
acpi0: TCPA checksum error
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET TCPA ____ SLIC
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI3(S5) PCI1(S5)
PCI5(S5) PCI6(S5) KBD_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
USB4(S3) USB5(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2992.93 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,
MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,
LONG,LAHF,PERF,SENSOR
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2992.51 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,
MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,
LONG,LAHF,PERF,SENSOR
cpu1: 6MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 4 (PCI4)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus 3 (PCI3)
acpiprt3 at acpi0: bus 1 (PCI1)
acpiprt4 at acpi0: bus -1 (PCI5)
acpiprt5 at acpi0: bus -1 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(1000@1 mwait.1)
acpicpu1 at acpi0: C1(1000@1 mwait.1)
acpibtn0 at acpi0: VBTN
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0616092606000926
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2992 MHz: speeds: 3000, 2000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel Q45 PCIE" rev 0x03: msi
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 5450" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5470 Audio" rev
0x00: msi
azalia0: no supported codecs
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 8 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 1 com
com4 at puc0 port 0 apic 8 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: msi,
address b8:ac:6f:a4:35:01
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 8
int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 8
int 17
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 8
int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 8
int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia1 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02:
msi
azalia1: codecs: Analog Devices AD1984A
audio0 at azalia1
ppb1 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801JD PCIE" rev 0x02: msi
pci3 at ppb2 bus 3
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 8
int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 8
int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 8
int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 8
int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801JD AHCI" rev 0x02: msi,
AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG HD083GJ, 1AC0> SCSI3
0/direct fixed naa.50000f000b017238
sd0: 76293MB, 512 bytes/sector, 156250000 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD+-RW DS-8A4S, JD12> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801JD SMBus" rev 0x02:
apic 8 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/54.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (577901fe5d590adb.a) swap on sd0b dump on sd0b
radeondrm0: 1440x900
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation),
using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
