Hi people,
I just upgraded one of my routers to todays snapshot and I'm seeing
em0: watchdog timeout -- resetting
in the dmesg. How can I debug this properly? Full dmesg and the output
of ifconfig are below the signature.
--
Gregor
$ dmesg
OpenBSD 5.8-current (GENERIC.MP) #1341: Sun Nov 1 01:06:18 MDT 2015
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF,ITSC,SENSOR,ARAT
real mem = 2135064576 (2036MB)
avail mem = 2081611776 (1985MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 10/11/11, SMBIOS rev. 2.7 @ 0xe9380 (50 entries)
bios0: vendor American Megatrends Inc. version "4.6.5" date 06/21/2012
bios0: INTEL Corporation Tiger Hill
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT SSDT SSDT IFEU
acpi0: wakeup devices P0P8(S4) PS2K(S3) PS2M(S3) USB0(S3) USB1(S3) USB2(S3)
USB3(S3) USB7(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4)
PXSX(S4) RP04(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF,ITSC,SENSOR,ARAT
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P8)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus 3 (RP03)
acpiprt5 at acpi0: bus 4 (RP04)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
acpitz0 at acpi0: critical temperature is 140 degC
acpipwrres0 at acpi0: FN00, resource for FAN0
acpitz1 at acpi0: critical temperature is 100 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibtn0 at acpi0: PWRB
acpiac0 at acpi0: AC unit offline
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID0
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
bios0: ROM list: 0xc0000/0xf400! 0xcf800/0x1000 0xd0800/0x1000 0xd1800/0x1000
0xd2800/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x0bf3 rev 0x04
vga1 at pci0 dev 2 function 0 "Intel GMA 3600" rev 0x0b
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address
00:03:2d:20:cf:84
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address
00:03:2d:20:cf:85
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address
00:03:2d:20:cf:86
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19
pci4 at ppb3 bus 4
em3 at pci4 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address
00:03:2d:20:cf:87
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 4 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SAMSUNG MMCRE64G5MXP-0VB>
wd0: 16-sector PIO, LBA48, 61057MB, 125045424 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x4e/2: W83627UHG rev 0x35
lm1 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (d28b647d42abe114.a) swap on wd0b dump on wd0b
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
priority: 0
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
inet 127.0.0.1 netmask 0xff000000
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:03:2d:20:cf:84
description: dsl uplink
priority: 0
groups: egress
media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
status: active
inet 94.79.177.226 netmask 0xfffffffc broadcast 94.79.177.227
inet6 fe80::203:2dff:fe20:cf84%em0 prefixlen 64 scopeid 0x1
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:03:2d:20:cf:85
description: Switch
priority: 0
media: Ethernet autoselect (1000baseT full-duplex)
status: active
inet6 fe80::203:2dff:fe20:cf85%em1 prefixlen 64 scopeid 0x2
em2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:03:2d:20:cf:86
priority: 0
media: Ethernet autoselect (none)
status: no carrier
em3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:03:2d:20:cf:87
priority: 0
media: Ethernet autoselect (none)
status: no carrier
enc0: flags=0<>
priority: 0
groups: enc
status: active
vlan10: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:03:2d:20:cf:85
description: VLAN device for IPv4 and IPv6 network
priority: 0
vlan: 10 parent interface: em1
groups: vlan intern
status: active
inet 172.31.64.1 netmask 0xfffffe00 broadcast 172.31.65.255
inet6 fe80::203:2dff:fe20:cf85%vlan10 prefixlen 64 scopeid 0x7
inet6 2001:470:7193:10::1 prefixlen 64
vlan6: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:03:2d:20:cf:85
description: VLAN device for IPv6-only network
priority: 0
vlan: 6 parent interface: em1
groups: vlan v6only
status: active
inet6 fe80::203:2dff:fe20:cf85%vlan6 prefixlen 64 scopeid 0x8
inet6 2001:470:7193:6::1 prefixlen 64
tun0: flags=10<POINTOPOINT> mtu 1500
description: ChaosVPN
priority: 0
groups: tun chaosvpn
status: down
gif0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280
description: Subraum IPv6
priority: 0
groups: gif henet egress
tunnel: inet 94.79.177.226 -> 216.66.80.30
inet6 fe80::203:2dff:fe20:cf84%gif0 -> prefixlen 64 scopeid 0xa
inet6 2001:470:1f0a:1c3::2 -> 2001:470:1f0a:1c3::1 prefixlen 128
inet6 2001:470:1f0b:1c3::1 -> prefixlen 64
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33192
priority: 0
groups: pflog
