On Tue, Oct 06, 2015 at 08:01 +0200, Alessandro DE LAURENZIS wrote: > Hello Mike, > > Thanks for your feedback, > > On Mon 05/10/2015 16:43, Mike Belopuhov wrote: > > > > Can you please add an "ifconfig -A" invocation to your hostname.trunk0: > > > > trunkproto failover > > trunkport em0 > > trunkport iwn0 > > !/sbin/ifconfig -A >/root/ifconfig.out 2>&1 > > dhcp > > > > And send me the output. > > [....................snip....................] > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768 > priority: 0 > groups: lo > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 > inet 127.0.0.1 netmask 0xff000000 > em0: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu > 1500 > lladdr 00:21:86:94:34:8e > priority: 0 > trunk: trunkdev trunk0 > media: Ethernet autoselect (none) > status: no carrier > iwn0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:21:86:94:34:8e > priority: 4 > trunk: trunkdev trunk0 > groups: wlan > media: IEEE802.11 autoselect (DS1) > status: no network > ieee80211: nwid <removed> wpakey <removed> wpaprotos wpa1,wpa2 > wpaakms psk wpaciphers tkip,ccmp wpagroupcipher tkip > enc0: flags=0<> > priority: 0 > groups: enc > status: active > trunk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:21:86:94:34:8e > priority: 0 > trunk: trunkproto failover > trunkport iwn0 active > trunkport em0 master > groups: trunk egress > media: Ethernet autoselect > status: active > inet 192.168.1.13 netmask 0xffffff00 broadcast 192.168.1.255 > pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33144 > priority: 0 > groups: pflog > [....................snip....................] > > To me, it seems that trunk0 is correctly bound to the wifi and has an IP > address assigned... >
Is this from the /root/ifconfig.out? Trunk interface should not have an IP address at this point. How does your /etc/hostname.trunk0 look like right now? > > > > Could you also try to capture the initial output from the dhclient > > or make a photo of the DHCP progress (and failure). > > > > Nothing "special": > > [....................snip....................] > DHCPREQUEST on trunk0 to 255.255.255.255 > DHCPREQUEST on trunk0 to 255.255.255.255 > DHCPREQUEST on trunk0 to 255.255.255.255 > DHCPREQUEST on trunk0 to 255.255.255.255 > DHCPREQUEST on trunk0 to 255.255.255.255 > DHCPDISCOVER on trunk0 - interval 1 > DHCPDISCOVER on trunk0 - interval 2 > DHCPDISCOVER on trunk0 - interval 3 > DHCPDISCOVER on trunk0 - interval 8 > DHCPDISCOVER on trunk0 - interval 11 > DHCPDISCOVER on trunk0 - interval 11 > DHCPDISCOVER on trunk0 - interval 14 > DHCPDISCOVER on trunk0 - interval 9 > No acceptable DHCPOFFERS received > Trying recorded lease 192.168.1.13 > bound to 192.168.1.13 - renewal in 21600 seconds. > [....................snip....................] > [snip] > bear with me, I need a couple of days to try this; I'll keep you > updated. > Please take your time. > Cheers > > -- > Alessandro DE LAURENZIS > [mailto:just22....@gmail.com] > LinkedIn: http://it.linkedin.com/in/delaurenzis